Re: [RESEND PATCH] ARM: dts: make arch-timer always on in rk3288 soc

[Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>]

Mark,

     Thanks for your reply and advice.

On 08/28/2014 11:11 PM, Mark Rutland wrote:
> On Thu, Aug 28, 2014 at 10:17:58AM +0100, Mark Rutland wrote:
>> Hi Kever,
>>
>> On Thu, Aug 28, 2014 at 02:40:17AM +0100, Kever Yang wrote:
>>> We need use the hrtimer, which need the arch-timer to be 'always-on'
>> I asked a question on the last posting [1]. Can you please confirm
>> either way?
>>
>> Thanks,
>> Mark.
>>
>> [1] lists.infradead.org/pipermail/linux-arm-kernel/2014-August/282327.html
> To clarify: if there are low power states that the CPU can enter where
> we lose state, then this patch isn't correct.
rk3288 has low power state and may turn off the cpu power domain
which will lost any logic state in cpu.
>
> A more general approach would be to enable the broadcast hrtimer for
> arm, as has been done for arm64.
>
> See commit 5d1638acb9f6 (tick: Introduce hrtimer based broadcast) which
> introduced the broadcast hrtimer, and commit 9358d755bd5c (arm64:
> kernel: initialize broadcast hrtimer based clock event device) which
> added the requisite plumbing for arm64.
I'll going to implement this and send another patch.

Thanks.

-Kever

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html