From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: Linu Cherian <lcherian@marvell.com>,
mike.leach@linaro.org, james.clark@arm.com
Cc: linux-arm-kernel@lists.infradead.org, coresight@lists.linaro.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
corbet@lwn.net, devicetree@vger.kernel.org, sgoutham@marvell.com,
gcherian@marvell.com
Subject: Re: [PATCH v10 7/8] coresight: config: Add preloaded configuration
Date: Thu, 3 Oct 2024 14:29:30 +0100 [thread overview]
Message-ID: <53b80d4d-31f2-4abf-a0ef-f194c63280dc@arm.com> (raw)
In-Reply-To: <20240916103437.226816-8-lcherian@marvell.com>
On 16/09/2024 11:34, Linu Cherian wrote:
> Add a preloaded configuration for generating
> external trigger on address match. This can be
> used by CTI and ETR blocks to stop trace capture
> on kernel panic.
>
> Kernel address for "panic" function is used as the
> default trigger address.
>
> This new configuration is available as,
> /sys/kernel/config/cs-syscfg/configurations/panicstop
>
> Signed-off-by: Linu Cherian <lcherian@marvell.com>
> Reviewed-by: James Clark <james.clark@arm.com>
> ---
> Changelog from v9:
> No changes
>
> drivers/hwtracing/coresight/Makefile | 2 +-
> .../coresight/coresight-cfg-preload.c | 2 +
> .../coresight/coresight-cfg-preload.h | 2 +
> .../hwtracing/coresight/coresight-cfg-pstop.c | 83 +++++++++++++++++++
> 4 files changed, 88 insertions(+), 1 deletion(-)
> create mode 100644 drivers/hwtracing/coresight/coresight-cfg-pstop.c
>
> diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
> index 4ba478211b31..46ce7f39d05f 100644
> --- a/drivers/hwtracing/coresight/Makefile
> +++ b/drivers/hwtracing/coresight/Makefile
> @@ -25,7 +25,7 @@ subdir-ccflags-y += $(condflags)
> obj-$(CONFIG_CORESIGHT) += coresight.o
> coresight-y := coresight-core.o coresight-etm-perf.o coresight-platform.o \
> coresight-sysfs.o coresight-syscfg.o coresight-config.o \
> - coresight-cfg-preload.o coresight-cfg-afdo.o \
> + coresight-cfg-preload.o coresight-cfg-afdo.o coresight-cfg-pstop.o \
Please could you only build it when ETM4X is selected ? That way you
could drop the "CONFIG" check in the code ?
> coresight-syscfg-configfs.o coresight-trace-id.o
> obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o
> coresight-tmc-y := coresight-tmc-core.o coresight-tmc-etf.o \
> diff --git a/drivers/hwtracing/coresight/coresight-cfg-preload.c b/drivers/hwtracing/coresight/coresight-cfg-preload.c
> index e237a4edfa09..4980e68483c5 100644
> --- a/drivers/hwtracing/coresight/coresight-cfg-preload.c
> +++ b/drivers/hwtracing/coresight/coresight-cfg-preload.c
> @@ -13,6 +13,7 @@
> static struct cscfg_feature_desc *preload_feats[] = {
> #if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X)
> &strobe_etm4x,
> + &gen_etrig_etm4x,
> #endif
> NULL
> };
> @@ -20,6 +21,7 @@ static struct cscfg_feature_desc *preload_feats[] = {
> static struct cscfg_config_desc *preload_cfgs[] = {
> #if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X)
> &afdo_etm4x,
> + &pstop_etm4x,
> #endif
> NULL
> };
> diff --git a/drivers/hwtracing/coresight/coresight-cfg-preload.h b/drivers/hwtracing/coresight/coresight-cfg-preload.h
> index 21299e175477..291ba530a6a5 100644
> --- a/drivers/hwtracing/coresight/coresight-cfg-preload.h
> +++ b/drivers/hwtracing/coresight/coresight-cfg-preload.h
> @@ -10,4 +10,6 @@
> #if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X)
> extern struct cscfg_feature_desc strobe_etm4x;
> extern struct cscfg_config_desc afdo_etm4x;
> +extern struct cscfg_feature_desc gen_etrig_etm4x;
> +extern struct cscfg_config_desc pstop_etm4x;
> #endif
> diff --git a/drivers/hwtracing/coresight/coresight-cfg-pstop.c b/drivers/hwtracing/coresight/coresight-cfg-pstop.c
> new file mode 100644
> index 000000000000..c2bfbd07bfaf
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/coresight-cfg-pstop.c
> @@ -0,0 +1,83 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright(C) 2023 Marvell.
> + * Based on coresight-cfg-afdo.c
> + */
> +
> +#include "coresight-config.h"
> +
> +/* ETMv4 includes and features */
> +#if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X)
Could we not drop this check, if we only build it when
CONFIG_CORESIGHT_SOURCE_ETM4X is selected. It is not useful
otherwise anyways.
Rest looks fine to me
Suzuki
> +#include "coresight-etm4x-cfg.h"
> +
> +/* preload configurations and features */
> +
> +/* preload in features for ETMv4 */
> +
> +/* panic_stop feature */
> +static struct cscfg_parameter_desc gen_etrig_params[] = {
> + {
> + .name = "address",
> + .value = (u64)panic,
> + },
> +};
> +
> +static struct cscfg_regval_desc gen_etrig_regs[] = {
> + /* resource selector */
> + {
> + .type = CS_CFG_REG_TYPE_RESOURCE,
> + .offset = TRCRSCTLRn(2),
> + .hw_info = ETM4_CFG_RES_SEL,
> + .val32 = 0x40001,
> + },
> + /* single address comparator */
> + {
> + .type = CS_CFG_REG_TYPE_RESOURCE | CS_CFG_REG_TYPE_VAL_64BIT |
> + CS_CFG_REG_TYPE_VAL_PARAM,
> + .offset = TRCACVRn(0),
> + .val32 = 0x0,
> + },
> + {
> + .type = CS_CFG_REG_TYPE_RESOURCE,
> + .offset = TRCACATRn(0),
> + .val64 = 0xf00,
> + },
> + /* Driver external output[0] with comparator out */
> + {
> + .type = CS_CFG_REG_TYPE_RESOURCE,
> + .offset = TRCEVENTCTL0R,
> + .val32 = 0x2,
> + },
> + /* end of regs */
> +};
> +
> +struct cscfg_feature_desc gen_etrig_etm4x = {
> + .name = "gen_etrig",
> + .description = "Generate external trigger on address match\n"
> + "parameter \'address\': address of kernel address\n",
> + .match_flags = CS_CFG_MATCH_CLASS_SRC_ETM4,
> + .nr_params = ARRAY_SIZE(gen_etrig_params),
> + .params_desc = gen_etrig_params,
> + .nr_regs = ARRAY_SIZE(gen_etrig_regs),
> + .regs_desc = gen_etrig_regs,
> +};
> +
> +/* create a panic stop configuration */
> +
> +/* the total number of parameters in used features */
> +#define PSTOP_NR_PARAMS ARRAY_SIZE(gen_etrig_params)
> +
> +static const char *pstop_ref_names[] = {
> + "gen_etrig",
> +};
> +
> +struct cscfg_config_desc pstop_etm4x = {
> + .name = "panicstop",
> + .description = "Stop ETM on kernel panic\n",
> + .nr_feat_refs = ARRAY_SIZE(pstop_ref_names),
> + .feat_ref_names = pstop_ref_names,
> + .nr_total_params = PSTOP_NR_PARAMS,
> +};
> +
> +/* end of ETM4x configurations */
> +#endif /* IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) */
next prev parent reply other threads:[~2024-10-03 13:29 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-16 10:34 [PATCH v10 0/8] Coresight for Kernel panic and watchdog reset Linu Cherian
2024-09-16 10:34 ` [PATCH v10 1/8] dt-bindings: arm: coresight-tmc: Add "memory-region" property Linu Cherian
2024-09-16 10:34 ` [PATCH v10 2/8] coresight: tmc-etr: Add support to use reserved trace memory Linu Cherian
2024-09-16 10:34 ` [PATCH v10 3/8] coresight: core: Add provision for panic callbacks Linu Cherian
2024-09-16 10:34 ` [PATCH v10 4/8] coresight: tmc: Enable panic sync handling Linu Cherian
2024-10-01 16:43 ` Suzuki K Poulose
2024-10-17 12:12 ` Linu Cherian
2024-10-28 9:40 ` Linu Cherian
2024-10-29 6:24 ` Linu Cherian
2024-10-29 8:27 ` Linu Cherian
2024-10-29 6:59 ` Linu Cherian
2024-09-16 10:34 ` [PATCH v10 5/8] coresight: tmc: Add support for reading crash data Linu Cherian
2024-10-03 13:25 ` Suzuki K Poulose
2024-10-17 11:40 ` Linu Cherian
2024-10-18 9:46 ` Suzuki K Poulose
2024-10-21 12:40 ` Linu Cherian
2024-10-29 6:21 ` Linu Cherian
2024-10-30 5:34 ` Linu Cherian
2024-09-16 10:34 ` [PATCH v10 6/8] coresight: tmc: Stop trace capture on FlIn Linu Cherian
2024-09-16 10:34 ` [PATCH v10 7/8] coresight: config: Add preloaded configuration Linu Cherian
2024-10-03 13:29 ` Suzuki K Poulose [this message]
2024-10-16 10:11 ` Linu Cherian
2024-09-16 10:34 ` [PATCH v10 8/8] Documentation: coresight: Panic support Linu Cherian
2024-09-17 1:46 ` Bagas Sanjaya
2024-09-19 2:09 ` Linu Cherian
2024-10-03 13:43 ` Suzuki K Poulose
2024-10-16 9:28 ` Linu Cherian
2024-09-16 11:16 ` [PATCH v10 0/8] Coresight for Kernel panic and watchdog reset Linu Cherian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53b80d4d-31f2-4abf-a0ef-f194c63280dc@arm.com \
--to=suzuki.poulose@arm.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=coresight@lists.linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gcherian@marvell.com \
--cc=james.clark@arm.com \
--cc=krzk+dt@kernel.org \
--cc=lcherian@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mike.leach@linaro.org \
--cc=robh@kernel.org \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).