Re: [PATCH v2 1/3] dt-bindings: iio: dac: Add AD5529R

[David Lechner <dlechner@baylibre.com>]

On 5/8/26 7:48 AM, Jonathan Cameron wrote:
> On Fri, 8 May 2026 13:55:47 +0200
> Janani Sunil <janani.sunil@analog.com> wrote:
> 
>> Devicetree bindings for AD5529R 16 channel 12/16 bit high voltage,
>> buffered voltage output digital-to-analog converter (DAC) with an
>> integrated precision reference.
>>
>> Signed-off-by: Janani Sunil <janani.sunil@analog.com>
>> ---

...

>> +  * Multiplexer for output voltage, load current sense and die temperature
>> +
>> +  Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad5529r.pdf
>> +
>> +properties:
>> +  compatible:
>> +    const: adi,ad5529r
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  spi-max-frequency:
>> +    maximum: 50000000
>> +
>> +  reset-gpios:
>> +    maxItems: 1
>> +    description:
>> +      GPIO connected to the RESET pin. Active low. When asserted low,
>> +      performs a power-on reset and initializes the device to its default state.
>> +
>> +  vdd-supply:
>> +    description: Digital power supply (typically 3.3V)
>> +
>> +  avdd-supply:
>> +    description: Analog power supply (typically 5V)
>> +
>> +  hvdd-supply:
>> +    description: High voltage positive supply (up to 40V for output range)
>> +
>> +  hvss-supply:
>> +    description: High voltage negative supply (ground or negative voltage)
> 
> I don't mind doing it this way but in some similar cases where 0 is something that
> can be considered the 'default' we've made the supply optional.  What was
> your reasoning for requiring it in this case?
> 
> dt-bindings should be as complete as we can make them - with that in mind...
> 
> There are some more interesting corners on this device the binding doesn't
> currently cover such as mux_out pin.  We'd normally do that by making the
> driver potentially a client of an ADC
> 
> Easier though is !alarm which smells like an interrupt.
> !clear probably a gpio. TG0-3 also GPIOs.

also optional vref-supply for external vs internal reference

> 
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - vdd-supply
>> +  - avdd-supply
>> +  - hvdd-supply
>> +  - hvss-supply
>