From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hartmut Knaack Subject: Re: [PATCH] iio: adc: rockchip_saradc: add support for rk3066-tsadc variant Date: Wed, 03 Sep 2014 00:20:58 +0200 Message-ID: <540642CA.9080007@gmx.de> References: <1999284.oRCTeZRSv1@diego> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <1999284.oRCTeZRSv1@diego> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: =?ISO-8859-1?Q?Heiko_St=FCbner?= , Jonathan Cameron Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Heiko St=FCbner schrieb: > Older Rockchip SoCs, at least the rk3066, used a slightly modified sa= radc > for temperature measurements. This so called tsadc does not contain a= ny > active parts like temperature interrupts and only supports polling th= e > current temperature. The returned voltage can then be converted by a > suitable thermal driver to and actual temperature and used for therma= l > handling. > > Signed-off-by: Heiko Stuebner > --- Looks mostly good to me, just some minor style issues inline. > This is a different IP than the rk3288-tsadc Ceasar provided a driver= for. > As the commit messages states, the one used on the rk3066 is just a s= aradc, > while the new tsadc in the rk3288 contains active components for ther= mal > handling. > > A working example using the pending iio-thermal driver can found on > https://github.com/mmind/linux-rockchip/commit/c07e02f069d9677d489f25= 4176619fae36f2aad0 > > .../bindings/iio/adc/rockchip-saradc.txt | 2 +- > drivers/iio/adc/rockchip_saradc.c | 62 ++++++++++++= +++++----- > 2 files changed, 50 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-sarad= c.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt > index 5d3ec1d..a9a5fe1 100644 > --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt > +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt > @@ -1,7 +1,7 @@ > Rockchip Successive Approximation Register (SAR) A/D Converter bindi= ngs > =20 > Required properties: > -- compatible: Should be "rockchip,saradc" > +- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc" > - reg: physical base address of the controller and length of memory = mapped > region. > - interrupts: The interrupt number to the cpu. The interrupt specifi= er format > diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rock= chip_saradc.c > index e074a0b..7effada 100644 > --- a/drivers/iio/adc/rockchip_saradc.c > +++ b/drivers/iio/adc/rockchip_saradc.c > @@ -18,13 +18,13 @@ > #include > #include > #include > +#include > #include > #include > #include > #include > =20 > #define SARADC_DATA 0x00 > -#define SARADC_DATA_MASK 0x3ff > =20 > #define SARADC_STAS 0x04 > #define SARADC_STAS_BUSY BIT(0) > @@ -38,15 +38,22 @@ > #define SARADC_DLY_PU_SOC 0x0c > #define SARADC_DLY_PU_SOC_MASK 0x3f > =20 > -#define SARADC_BITS 10 > #define SARADC_TIMEOUT msecs_to_jiffies(100) > =20 > +struct rockchip_saradc_data { > + int num_bits; > + const struct iio_chan_spec *channels; > + int num_channels; > + unsigned long clk_rate; > +}; > + > struct rockchip_saradc { > void __iomem *regs; > struct clk *pclk; > struct clk *clk; > struct completion completion; > struct regulator *vref; > + const struct rockchip_saradc_data *data; > u16 last_val; > }; The alignment of the whole block should be adjusted to fit with the new= element. > =20 > @@ -90,7 +97,7 @@ static int rockchip_saradc_read_raw(struct iio_dev = *indio_dev, > } > =20 > *val =3D ret / 1000; > - *val2 =3D SARADC_BITS; > + *val2 =3D info->data->num_bits; > return IIO_VAL_FRACTIONAL_LOG2; > default: > return -EINVAL; > @@ -103,7 +110,7 @@ static irqreturn_t rockchip_saradc_isr(int irq, v= oid *dev_id) > =20 > /* Read value */ > info->last_val =3D readl_relaxed(info->regs + SARADC_DATA); > - info->last_val &=3D SARADC_DATA_MASK; > + info->last_val &=3D BIT(info->data->num_bits) - 1; I think using GENMASK would reflect the intention better, that you want= to mask out your data. > =20 > /* Clear irq & power down adc */ > writel_relaxed(0, info->regs + SARADC_CTRL); > @@ -133,12 +140,44 @@ static const struct iio_chan_spec rockchip_sara= dc_iio_channels[] =3D { > ADC_CHANNEL(2, "adc2"), > }; > =20 > +static const struct rockchip_saradc_data saradc_data =3D { > + .num_bits =3D 10, > + .channels =3D rockchip_saradc_iio_channels, > + .num_channels =3D ARRAY_SIZE(rockchip_saradc_iio_channels), > + .clk_rate =3D 1000000, > +}; > + > +static const struct iio_chan_spec rockchip_rk3066_tsadc_iio_channels= [] =3D { > + ADC_CHANNEL(0, "adc0"), > + ADC_CHANNEL(1, "adc1"), > +}; > + > +static const struct rockchip_saradc_data rk3066_tsadc_data =3D { > + .num_bits =3D 12, > + .channels =3D rockchip_rk3066_tsadc_iio_channels, > + .num_channels =3D ARRAY_SIZE(rockchip_rk3066_tsadc_iio_channels), > + .clk_rate =3D 50000, > +}; > + > +static const struct of_device_id rockchip_saradc_match[] =3D { > + { > + .compatible =3D "rockchip,saradc", > + .data =3D &saradc_data, > + }, { > + .compatible =3D "rockchip,rk3066-tsadc", > + .data =3D &rk3066_tsadc_data, > + }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, rockchip_saradc_match); > + > static int rockchip_saradc_probe(struct platform_device *pdev) > { > struct rockchip_saradc *info =3D NULL; > struct device_node *np =3D pdev->dev.of_node; > struct iio_dev *indio_dev =3D NULL; > struct resource *mem; > + const struct of_device_id *match; > int ret; > int irq; > =20 > @@ -152,6 +191,9 @@ static int rockchip_saradc_probe(struct platform_= device *pdev) > } > info =3D iio_priv(indio_dev); > =20 > + match =3D of_match_device(rockchip_saradc_match, &pdev->dev); > + info->data =3D match->data; > + > mem =3D platform_get_resource(pdev, IORESOURCE_MEM, 0); > info->regs =3D devm_ioremap_resource(&pdev->dev, mem); > if (IS_ERR(info->regs)) > @@ -195,7 +237,7 @@ static int rockchip_saradc_probe(struct platform_= device *pdev) > * Use a default of 1MHz for the converter clock. > * This may become user-configurable in the future. > */ > - ret =3D clk_set_rate(info->clk, 1000000); > + ret =3D clk_set_rate(info->clk, info->data->clk_rate); > if (ret < 0) { > dev_err(&pdev->dev, "failed to set adc clk rate, %d\n", ret); > return ret; > @@ -227,8 +269,8 @@ static int rockchip_saradc_probe(struct platform_= device *pdev) > indio_dev->info =3D &rockchip_saradc_iio_info; > indio_dev->modes =3D INDIO_DIRECT_MODE; > =20 > - indio_dev->channels =3D rockchip_saradc_iio_channels; > - indio_dev->num_channels =3D ARRAY_SIZE(rockchip_saradc_iio_channels= ); > + indio_dev->channels =3D info->data->channels; > + indio_dev->num_channels =3D info->data->num_channels; > =20 > ret =3D iio_device_register(indio_dev); > if (ret) > @@ -296,12 +338,6 @@ static int rockchip_saradc_resume(struct device = *dev) > static SIMPLE_DEV_PM_OPS(rockchip_saradc_pm_ops, > rockchip_saradc_suspend, rockchip_saradc_resume); > =20 > -static const struct of_device_id rockchip_saradc_match[] =3D { > - { .compatible =3D "rockchip,saradc" }, > - {}, > -}; > -MODULE_DEVICE_TABLE(of, rockchip_saradc_match); > - > static struct platform_driver rockchip_saradc_driver =3D { > .probe =3D rockchip_saradc_probe, > .remove =3D rockchip_saradc_remove,