From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Felipe Balbi <balbi@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>,
"pawel.moll@arm.com" <pawel.moll@arm.com>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"ijc+devicetree@hellion.org.uk" <ijc+devicetree@hellion.org.uk>,
"galak@codeaurora.org" <galak@codeaurora.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
SH-Linux <linux-sh@vger.kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Ulrich Hecht <ulrich.hecht@gmail.com>
Subject: [PATCH v3 2/2] usb: renesas_usbhs: Add device tree support for R-Car H2 and M2
Date: Wed, 3 Sep 2014 14:25:56 +0900 [thread overview]
Message-ID: <5406A664.2050501@renesas.com> (raw)
This driver supports other SoCs, but they need boards/Soc depend code.
So, this patch adds device tree support for R-Car H2 and M2 initially.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
drivers/usb/renesas_usbhs/common.c | 44 ++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 1b9bf8d..b3b6813 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -18,6 +18,8 @@
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
@@ -438,6 +440,43 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
/*
* platform functions
*/
+static const struct of_device_id usbhs_of_match[] = {
+ {
+ .compatible = "renesas,usbhs-r8a7790",
+ .data = (void *)USBHS_TYPE_R8A7790,
+ },
+ {
+ .compatible = "renesas,usbhs-r8a7791",
+ .data = (void *)USBHS_TYPE_R8A7791,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, usbhs_of_match);
+
+static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
+{
+ struct renesas_usbhs_platform_info *info;
+ struct renesas_usbhs_driver_param *dparam;
+ const struct of_device_id *of_id = of_match_device(usbhs_of_match, dev);
+ u32 tmp;
+ int gpio;
+
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return NULL;
+
+ dparam = &info->driver_param;
+ dparam->type = of_id ? (u32)of_id->data : 0;
+ if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp))
+ dparam->buswait_bwait = tmp;
+ gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0,
+ NULL);
+ if (gpio > 0)
+ dparam->enable_gpio = gpio;
+
+ return info;
+}
+
static int usbhs_probe(struct platform_device *pdev)
{
struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
@@ -446,6 +485,10 @@ static int usbhs_probe(struct platform_device *pdev)
struct resource *res, *irq_res;
int ret;
+ /* check device node */
+ if (pdev->dev.of_node)
+ info = pdev->dev.platform_data = usbhs_parse_dt(&pdev->dev);
+
/* check platform information */
if (!info) {
dev_err(&pdev->dev, "no platform information\n");
@@ -689,6 +732,7 @@ static struct platform_driver renesas_usbhs_driver = {
.driver = {
.name = "renesas_usbhs",
.pm = &usbhsc_pm_ops,
+ .of_match_table = of_match_ptr(usbhs_of_match),
},
.probe = usbhs_probe,
.remove = usbhs_remove,
--
1.7.9.5
next reply other threads:[~2014-09-03 5:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-03 5:25 Yoshihiro Shimoda [this message]
[not found] ` <5406A664.2050501-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2014-09-29 16:35 ` [PATCH v3 2/2] usb: renesas_usbhs: Add device tree support for R-Car H2 and M2 Sergei Shtylyov
2014-09-30 9:51 ` Yoshihiro Shimoda
[not found] ` <542A7D29.3010805-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2014-09-30 21:34 ` Sergei Shtylyov
[not found] ` <542B21DE.4010903-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2014-10-01 19:22 ` Sergei Shtylyov
2014-10-02 0:05 ` Yoshihiro Shimoda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5406A664.2050501@renesas.com \
--to=yoshihiro.shimoda.uh@renesas.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-sh@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=ulrich.hecht@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).