Re: [PATCH 5/5] rtc: at91sam9: add DT bindings documentation

[Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>]

On 10/09/2014 17:52, Johan Hovold :
> On Wed, Sep 10, 2014 at 05:31:14PM +0200, Boris BREZILLON wrote:
>> On Wed, 10 Sep 2014 17:07:02 +0200
>> Johan Hovold <johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> 
>>> Yes, this essentially what I suggested in the thread (and my last reply)
>>> and relying on syscon rather than a custom driver seems like a good
>>> idea. It would allow early access to the registers too with the recently
>>> proposed changes. It would not guarantee any kind of exclusivity,
>>> though, but I guess that's tolerable?
>>
>> Yep, that's one of the concern I had with the syscon/regmap
>> approach :-(, but I guess I'll give this solution a try and post a new
>> version of this series ;-).
> 
> Perhaps we should see what Nicolas and Jean-Christophe says before
> rushing into anything (again). ;)

I said and say it again: keep it simple: if gpbr 0 is used by bootloader
to pass information about the boot media, use gpbr 1, without protection
without anything fancy, please.

atmel,at91-rtt-as-rtc-gpbr = <1>;
is good for me.

We can decide to keep the DT binding as "unstable" and see what happen
in one year from now (I suspect nothing will happen). The result is that
we will have a simple update of this driver without new API or new
sub-system to learn and maintain.

So, all in all, I would just take what Johan or Boris did, and go with
this, now!


> I remember J-C considered loosing track of what was using a particular
> backup register to be a regression. But I guess you can't have it both
> ways (e.g. if you also want the early access soon provided by syscon).
> 
> I'll refresh my rtt and gmbr-node patches meanwhile, as they should be
> needed in some form at least.
> 
>> Can we just leave the rtt as an rtc problem on the side for now and bind
>> it to the rtc-at91sam9 driver.
>>
>> If we ever decide to add a new driver using the RTT for another purpose
>> we will still be able to reference the RTT block like this (and keep
>> the existing rtt node definition):
>>
>> rtt-based-rtc {
>> 	compatible = "atmel,rtt-rtc";
>> 	atmel,rtt = <&rtt>;
>> 	atmel,time-reg = <&gpbr 0x0>;
>> }
> 
> But why not do this from the start?
> 
>> rtt-based-xdev {
>> 	compatible = "atmel,rtt-xdev";
>> 	atmel,rtt = <&rtt>;
>> 	/*...*/
>> }
> 
> Johan
> 
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html