From: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Jacob Pan <jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
IIO <linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
LKML <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
DEVICE TREE <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>,
Srinivas Pandruvada
<srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Aaron Lu <aaron.lu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Alan Cox <alan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>,
Hartmut Knaack <knaack.h-Mmb7MZpHnFY@public.gmane.org>,
Fugang Duan <B38611-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
Zubair Lutfullah
<zubair.lutfullah-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Sebastian Reichel <sre-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>,
Johannes Thumshirn
<johannes.thumshirn-csrFAY9JiS4@public.gmane.org>,
Philippe Reynes <tremyfr-Qt13gs6zZMY@public.gmane.org>,
Angelo Compagnucci
<angelo.compagnucci-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Ramakrishna Pallala
<ramakrishna.pallala-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Peter Meerwald <pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org>,
Max
Subject: Re: [PATCH v3 1/5] mfd/axp20x: rename files to support more devices
Date: Sat, 13 Sep 2014 21:00:36 +0100 [thread overview]
Message-ID: <5414A264.8090100@kernel.org> (raw)
In-Reply-To: <1410477357-6407-2-git-send-email-jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
On 12/09/14 00:15, Jacob Pan wrote:
> More XPowers PMIC devices can be supported by extending this driver, so
> rename it to axp2xx to cover axp288 variant.
>
> Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Jacob Pan <jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
I'm not sure this rename is a good idea (or the original wild
card was for that matter).
For example, just a quick look at the xpowers website shows there is a AXP228
which just got swept up by the name change.
Best plan, in my view, is to always name a driver after an individual part it
supports and rely on Kconfig description to say what else is supported.
Bit late here, but perhaps best not to make things worse!
> ---
> drivers/mfd/Kconfig | 7 ++++---
> drivers/mfd/Makefile | 2 +-
> drivers/mfd/{axp20x.c => axp2xx.c} | 6 +++---
> include/linux/mfd/{axp20x.h => axp2xx.h} | 6 +++---
> 4 files changed, 11 insertions(+), 10 deletions(-)
> rename drivers/mfd/{axp20x.c => axp2xx.c} (97%)
> rename include/linux/mfd/{axp20x.h => axp2xx.h} (98%)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index de5abf2..42a70a3 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -67,14 +67,15 @@ config MFD_BCM590XX
> help
> Support for the BCM590xx PMUs from Broadcom
>
> -config MFD_AXP20X
> - bool "X-Powers AXP20X"
> +config MFD_AXP2XX
> + bool "X-Powers AXP2XX"
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> depends on I2C=y
> help
> - If you say Y here you get support for the X-Powers AXP202 and AXP209.
> + If you say Y here you get support for the X-Powers AXP202, AXP209 and
> + AXP288 power management IC (PMIC).
> This driver include only the core APIs. You have to select individual
> components like regulators or the PEK (Power Enable Key) under the
> corresponding menus.
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 3fcfdfc..8d0beb2 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -103,7 +103,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
> obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
> obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
> obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
> -obj-$(CONFIG_MFD_AXP20X) += axp20x.o
> +obj-$(CONFIG_MFD_AXP2XX) += axp2xx.o
>
> obj-$(CONFIG_MFD_LP3943) += lp3943.o
> obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp2xx.c
> similarity index 97%
> rename from drivers/mfd/axp20x.c
> rename to drivers/mfd/axp2xx.c
> index dee6539..332a8a0 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp2xx.c
> @@ -1,7 +1,7 @@
> /*
> - * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
> + * axp2xx.c - MFD core driver for the X-Powers AXP202 and AXP209
> *
> - * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
> + * AXP2xx comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
> * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
> * as well as 4 configurable GPIOs.
> *
> @@ -21,7 +21,7 @@
> #include <linux/regmap.h>
> #include <linux/slab.h>
> #include <linux/regulator/consumer.h>
> -#include <linux/mfd/axp20x.h>
> +#include <linux/mfd/axp2xx.h>
> #include <linux/mfd/core.h>
> #include <linux/of_device.h>
> #include <linux/of_irq.h>
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp2xx.h
> similarity index 98%
> rename from include/linux/mfd/axp20x.h
> rename to include/linux/mfd/axp2xx.h
> index d0e31a2..a36d91b 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp2xx.h
> @@ -8,8 +8,8 @@
> * published by the Free Software Foundation.
> */
>
> -#ifndef __LINUX_MFD_AXP20X_H
> -#define __LINUX_MFD_AXP20X_H
> +#ifndef __LINUX_MFD_AXP2XX_H
> +#define __LINUX_MFD_AXP2XX_H
>
> enum {
> AXP202_ID = 0,
> @@ -177,4 +177,4 @@ struct axp20x_dev {
> long variant;
> };
>
> -#endif /* __LINUX_MFD_AXP20X_H */
> +#endif /* __LINUX_MFD_AXP2XX_H */
>
next prev parent reply other threads:[~2014-09-13 20:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-11 23:15 [PATCH v3 0/5] Initial support for XPowers AXP288 PMIC Jacob Pan
2014-09-11 23:15 ` [PATCH v3 2/5] mfd/axp2xx: extend axp20x to support axp288 pmic Jacob Pan
2014-09-15 22:22 ` Lee Jones
2014-09-15 22:32 ` Jacob Pan
2014-09-15 23:34 ` Lee Jones
2014-09-11 23:15 ` [PATCH v3 3/5] regulator/axp20x: use axp2xx consolidated header Jacob Pan
[not found] ` <1410477357-6407-4-git-send-email-jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-09-13 20:01 ` Jonathan Cameron
2014-09-11 23:15 ` [PATCH v3 4/5] iio/adc/axp288: add support for axp288 gpadc Jacob Pan
2014-09-11 23:15 ` [PATCH v3 5/5] iio: add documentation for current attribute Jacob Pan
[not found] ` <1410477357-6407-6-git-send-email-jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-09-13 19:55 ` Jonathan Cameron
[not found] ` <5414A138.9080602-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-09-14 13:13 ` Hartmut Knaack
[not found] ` <5415948C.6080509-Mmb7MZpHnFY@public.gmane.org>
2014-09-15 20:29 ` Jacob Pan
[not found] ` <1410477357-6407-1-git-send-email-jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-09-11 23:15 ` [PATCH v3 1/5] mfd/axp20x: rename files to support more devices Jacob Pan
[not found] ` <1410477357-6407-2-git-send-email-jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-09-13 20:00 ` Jonathan Cameron [this message]
[not found] ` <5414A264.8090100-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-09-15 16:28 ` Jacob Pan
2014-09-15 22:18 ` Lee Jones
2014-09-12 15:18 ` [PATCH v3 0/5] Initial support for XPowers AXP288 PMIC Maxime Ripard
2014-09-12 19:36 ` Jacob Pan
2014-09-15 9:02 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5414A264.8090100@kernel.org \
--to=jic23-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=B38611-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=aaron.lu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=alan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=angelo.compagnucci-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=johannes.thumshirn-csrFAY9JiS4@public.gmane.org \
--cc=knaack.h-Mmb7MZpHnFY@public.gmane.org \
--cc=lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org \
--cc=ramakrishna.pallala-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=sre-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org \
--cc=srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=tremyfr-Qt13gs6zZMY@public.gmane.org \
--cc=zubair.lutfullah-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).