From: Lokesh Vutla <lokeshvutla@ti.com>
To: a.zummo@towertech.it, rtc-linux@googlegroups.com
Cc: nsekhar@ti.com, t-kristo@ti.com, nm@ti.com, j-keerthy@ti.com,
balbi@ti.com, tony@atomide.com,
linux-omap <linux-omap@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH] rtc: omap: Support regulator supply for RTC
Date: Fri, 19 Sep 2014 15:18:44 +0530 [thread overview]
Message-ID: <541BFBFC.5070505@ti.com> (raw)
In-Reply-To: <1411119994-8234-1-git-send-email-lokeshvutla@ti.com>
+linux-omap, linux-arm-kernel, devicetree
On Friday 19 September 2014 03:16 PM, Lokesh Vutla wrote:
> On some Soc's RTC is powered by an external power regulator.
> e.g. RTC on DRA7 SoC. Make the OMAP RTC driver support a
> power regulator.
> And also making the driver as module_platform_driver to
> support probe deferal.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
> Tested on DRA7. Logs here: http://fpaste.org/134804/11200041/
>
> Documentation/devicetree/bindings/rtc/rtc-omap.txt | 3 +++
> drivers/rtc/rtc-omap.c | 28 ++++++++++++++++++++--
> 2 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> index 5a0f02d..c9f963a 100644
> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> @@ -10,6 +10,9 @@ Required properties:
> - interrupts: rtc timer, alarm interrupts in order
> - interrupt-parent: phandle for the interrupt controller
>
> +Optional Properties:
> + - rtc-supply : phandle to the regulator device tree node if needed.
> +
> Example:
>
> rtc@1c23000 {
> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
> index 21142e6..4473d1d 100644
> --- a/drivers/rtc/rtc-omap.c
> +++ b/drivers/rtc/rtc-omap.c
> @@ -24,6 +24,7 @@
> #include <linux/of_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/io.h>
> +#include <linux/regulator/consumer.h>
>
> /* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
> * with century-range alarm matching, driven by the 32kHz clock.
> @@ -121,6 +122,7 @@
> #define OMAP_RTC_HAS_32KCLK_EN BIT(2)
>
> static void __iomem *rtc_base;
> +static struct regulator *rtc_reg;
>
> #define rtc_read(addr) readb(rtc_base + (addr))
> #define rtc_write(val, addr) writeb(val, rtc_base + (addr))
> @@ -372,11 +374,12 @@ static const struct of_device_id omap_rtc_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, omap_rtc_of_match);
>
> -static int __init omap_rtc_probe(struct platform_device *pdev)
> +static int omap_rtc_probe(struct platform_device *pdev)
> {
> struct resource *res;
> struct rtc_device *rtc;
> u8 reg, new_ctrl;
> + int ret;
> const struct platform_device_id *id_entry;
> const struct of_device_id *of_id;
>
> @@ -402,6 +405,23 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> return -ENOENT;
> }
>
> + rtc_reg = devm_regulator_get_optional(&pdev->dev, "rtc");
> + if (IS_ERR(rtc_reg)) {
> + if (PTR_ERR(rtc_reg) == -EPROBE_DEFER) {
> + dev_err(&pdev->dev, "regulator not ready, retry\n");
> + return -EPROBE_DEFER;
> + }
> + rtc_reg = NULL;
> + }
> +
> + if (rtc_reg) {
> + ret = regulator_enable(rtc_reg);
> + if (ret) {
> + dev_dbg(&pdev->dev, "regulator enable failed\n");
> + return ret;
> + }
> + }
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> rtc_base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(rtc_base))
> @@ -517,6 +537,9 @@ static int __exit omap_rtc_remove(struct platform_device *pdev)
> pm_runtime_put_sync(&pdev->dev);
> pm_runtime_disable(&pdev->dev);
>
> + if (rtc_reg)
> + regulator_disable(rtc_reg);
> +
> return 0;
> }
>
> @@ -565,6 +588,7 @@ static void omap_rtc_shutdown(struct platform_device *pdev)
>
> MODULE_ALIAS("platform:omap_rtc");
> static struct platform_driver omap_rtc_driver = {
> + .probe = omap_rtc_probe,
> .remove = __exit_p(omap_rtc_remove),
> .shutdown = omap_rtc_shutdown,
> .driver = {
> @@ -576,7 +600,7 @@ static struct platform_driver omap_rtc_driver = {
> .id_table = omap_rtc_devtype,
> };
>
> -module_platform_driver_probe(omap_rtc_driver, omap_rtc_probe);
> +module_platform_driver(omap_rtc_driver);
>
> MODULE_AUTHOR("George G. Davis (and others)");
> MODULE_LICENSE("GPL");
>
next parent reply other threads:[~2014-09-19 9:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1411119994-8234-1-git-send-email-lokeshvutla@ti.com>
2014-09-19 9:48 ` Lokesh Vutla [this message]
2014-09-19 12:54 ` [PATCH] rtc: omap: Support regulator supply for RTC Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=541BFBFC.5070505@ti.com \
--to=lokeshvutla@ti.com \
--cc=a.zummo@towertech.it \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=rtc-linux@googlegroups.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).