devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Varka Bhadram <varkabhadram@gmail.com>
To: Ankit Jindal <ankit.jindal@linaro.org>, linux-kernel@vger.kernel.org
Cc: "Hans J. Koch" <hjk@hansjkoch.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	patches@apm.com, linux-arm-kernel@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>,
	Tushar Jagad <tushar.jagad@linaro.org>,
	Russell King - ARM Linux <linux@arm.linux.org.uk>,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v2 4/6] drivers: uio: Add X-Gene QMTM UIO driver
Date: Tue, 30 Sep 2014 11:35:25 +0530	[thread overview]
Message-ID: <542A4825.4070805@gmail.com> (raw)
In-Reply-To: <1412051169-9142-5-git-send-email-ankit.jindal@linaro.org>

I think *drivers* is not required in the commit message...

On 09/30/2014 09:56 AM, Ankit Jindal wrote:
> The Applied Micro X-Gene SOC has on-chip QMTM (Queue manager
> and Traffic manager) which is hardware based Queue or Ring
> manager. This QMTM device can be used in conjunction with
> other devices such as DMA Engine, Ethernet, Security Engine,
> etc to assign work based on queues or rings.
>
> This patch allows user space access to X-Gene QMTM device.
>
> Signed-off-by: Ankit Jindal <ankit.jindal@linaro.org>
> Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org>
> ---
>   drivers/uio/Kconfig          |    8 ++
>   drivers/uio/Makefile         |    1 +
>   drivers/uio/uio_xgene_qmtm.c |  278 ++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 287 insertions(+)
>   create mode 100644 drivers/uio/uio_xgene_qmtm.c
>
> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> index 5a90914..76b1858 100644
> --- a/drivers/uio/Kconfig
> +++ b/drivers/uio/Kconfig
> @@ -135,4 +135,12 @@ config UIO_MF624
>   
>   	  If you compile this as a module, it will be called uio_mf624.
>   
> +config UIO_XGENE_QMTM
> +	tristate "Applied Micro X-Gene QMTM driver"
> +	depends on OF
> +	help
> +	  Userspace I/O interface for the X-Gene QMTM. The userspace part of
> +	  this driver will be available for download from the Applied Micro
> +	  web site (http://www.apm.com/).
> +
>   endif
> diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
> index d3218bd..633eaa0 100644
> --- a/drivers/uio/Makefile
> +++ b/drivers/uio/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_UIO_PCI_GENERIC)	+= uio_pci_generic.o
>   obj-$(CONFIG_UIO_NETX)	+= uio_netx.o
>   obj-$(CONFIG_UIO_PRUSS)         += uio_pruss.o
>   obj-$(CONFIG_UIO_MF624)         += uio_mf624.o
> +obj-$(CONFIG_UIO_XGENE_QMTM)	+= uio_xgene_qmtm.o
> diff --git a/drivers/uio/uio_xgene_qmtm.c b/drivers/uio/uio_xgene_qmtm.c
> new file mode 100644
> index 0000000..36d9000
> --- /dev/null
> +++ b/drivers/uio/uio_xgene_qmtm.c
> @@ -0,0 +1,278 @@
> +/*
> + * X-Gene Queue Manager Traffic Manager (QMTM) UIO driver (uio_xgene_qmtm)
> + *
> + * This driver exports QMTM CSRs, Fabric and memory for queues to user-space
> + *
> + * Copyright (C) 2014 Applied Micro - http://www.apm.com/
> + * Copyright (C) 2014 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/platform_device.h>
> +#include <linux/uio_driver.h>
> +#include <linux/io.h>
> +#include <linux/clk.h>
> +#include <linux/slab.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +

Headers in alphabetical order...?

#include <linux/clk.h>
#include <linux/device.h>

...

> +#define DRV_NAME "qmtm_uio"
> +#define DRV_VERSION "1.0"
> +
> +#define QMTM_CFG_MEM_RAM_SHUTDOWN	0x0000d070
> +
> +#define QMTM_DEFAULT_QSIZE		65536
> +
> +struct uio_qmtm_dev {
> +	struct uio_info *info;
> +	struct clk *qmtm_clk;
> +};
> +
> +/* QMTM CSR read/write routine */
> +static inline void qmtm_csr_write(struct uio_qmtm_dev *qmtm_dev, u32 offset,
> +		u32 data)
> +{
> +	void __iomem *addr = qmtm_dev->info->mem[0].internal_addr;
> +
> +	writel(data, addr + offset);
> +}
> +
> +static inline u32 qmtm_csr_read(struct uio_qmtm_dev *qmtm_dev, u32 offset)
> +{
> +	void __iomem *addr = qmtm_dev->info->mem[0].internal_addr;
> +
> +	return readl(addr + offset);
> +}
> +
> +static int qmtm_reset(struct uio_qmtm_dev *qmtm_dev)
> +{
> +	u32 val;
> +	int wait = 1000;
> +
> +	/* reset the internal memory of the device */
> +	qmtm_csr_write(qmtm_dev, QMTM_CFG_MEM_RAM_SHUTDOWN, 0);
> +
> +	/* check whether device internal memory is out of reset or not */
> +	while (1) {
> +		val = qmtm_csr_read(qmtm_dev, QMTM_CFG_MEM_RAM_SHUTDOWN);
> +
> +		if (val != 0xffffffff)
> +			return 0;
> +
> +		if (!wait--)
> +			return -EBUSY;
> +
> +		udelay(1);
> +	}
> +}
> +
> +static void qmtm_cleanup(struct platform_device *pdev,
> +		struct uio_qmtm_dev *qmtm_dev)
> +{
> +	struct uio_info *info = qmtm_dev->info;
> +
> +	uio_unregister_device(info);
> +
> +	clk_disable_unprepare(qmtm_dev->qmtm_clk);
> +}
> +
> +static int qmtm_probe(struct platform_device *pdev)
> +{
> +	struct uio_info *info;
> +	struct uio_qmtm_dev *qmtm_dev;
> +	struct resource *csr;
> +	struct resource *fabric;
> +	struct resource qpool;
> +	unsigned int num_queues;
> +	unsigned int devid;
> +	phandle qpool_phandle;
> +	struct device_node *qpool_node;
> +	int ret;
> +
> +	qmtm_dev = devm_kzalloc(&pdev->dev, sizeof(struct uio_qmtm_dev),
> +				GFP_KERNEL);
> +	if (!qmtm_dev)
> +		return -ENOMEM;
> +
> +	qmtm_dev->info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
> +	if (!qmtm_dev->info)
> +		return -ENOMEM;
> +
> +	/* Power on qmtm in case its not done as part of boot-loader */
> +	qmtm_dev->qmtm_clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(qmtm_dev->qmtm_clk)) {
> +		dev_err(&pdev->dev, "Failed to get clock\n");
> +		ret = PTR_ERR(qmtm_dev->qmtm_clk);
> +		return ret;
> +	} else {
> +		clk_prepare_enable(qmtm_dev->qmtm_clk);
> +	}
> +
> +	csr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!csr) {
> +		ret = -ENODEV;
> +		dev_err(&pdev->dev, "No QMTM CSR resource specified\n");
> +		goto out_free;
> +	}
> +
> +	if (!csr->start) {
> +		ret = -EINVAL;
> +		dev_err(&pdev->dev, "Invalid CSR resource\n");
> +		goto out_free;
> +	}
> +
> +	fabric = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	if (!fabric) {
> +		ret = -ENODEV;
> +		dev_err(&pdev->dev, "No QMTM Fabric resource specified\n");
> +		goto out_free;
> +	}
> +
> +	if (!fabric->start) {
> +		ret = -EINVAL;
> +		dev_err(&pdev->dev, "Invalid Fabric resource\n");
> +		goto out_free;
> +	}
> +
> +	ret = of_property_read_u32(pdev->dev.of_node, "qpool", &qpool_phandle);
> +

unnecessary one line space..

> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "No qpool resource specified\n");
> +		goto out_free;
> +	}
> +
> +	qpool_node = of_find_node_by_phandle(qpool_phandle);
> +

unnecessary one line space..

> +	if (IS_ERR_OR_NULL(qpool_node)) {
> +		ret = PTR_ERR(qpool_node);
> +		dev_err(&pdev->dev, "Failed to get node by phandle\n");
> +		goto out_free;
> +	}
> +
> +	ret = of_address_to_resource(qpool_node, 0, &qpool);
> +
> +	of_node_put(qpool_node);
> +
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Failed to get qpool resource from node\n");
> +		goto out_free;
> +	}
> +
> +	if (!qpool.start) {
> +		ret = -EINVAL;
> +		dev_err(&pdev->dev, "Invalid qpool resource\n");
> +		goto out_free;
> +	}
> +
> +	ret = of_property_read_u32(pdev->dev.of_node, "num-queues",
> +			&num_queues);
> +

unnecessary one line space..

> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "No num-queues resource specified\n");
> +		goto out_free;
> +	}
> +
> +	/* check whether sufficient memory is provided for the given queues */
> +	if (!((num_queues * QMTM_DEFAULT_QSIZE) <= resource_size(&qpool))) {
> +		ret = -ENOSPC;
> +		dev_err(&pdev->dev, "Insufficient Qpool for the given queues\n");
> +		goto out_free;
> +	}
> +
> +	ret = of_property_read_u32(pdev->dev.of_node, "devid", &devid);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "No devid resource specified\n");
> +		goto out_free;
> +	}
> +
> +	info = qmtm_dev->info;
> +	info->mem[0].name = "csr";
> +	info->mem[0].addr = csr->start;
> +	info->mem[0].size = resource_size(csr);
> +	info->mem[0].memtype = UIO_MEM_PHYS;
> +	info->mem[0].internal_addr = devm_ioremap_resource(&pdev->dev, csr);
> +
> +	if (IS_ERR(info->mem[0].internal_addr)) {
> +		ret = PTR_ERR(info->mem[0].internal_addr);
> +		dev_err(&pdev->dev, "Failed to ioremap CSR region\n");
> +		goto out_free;
> +	}
> +
> +	info->mem[1].name = "fabric";
> +	info->mem[1].addr = fabric->start;
> +	info->mem[1].size = resource_size(fabric);
> +	info->mem[1].memtype = UIO_MEM_PHYS;
> +
> +	info->mem[2].name = "qpool";
> +	info->mem[2].addr = qpool.start;
> +	info->mem[2].size = resource_size(&qpool);
> +	info->mem[2].memtype = UIO_MEM_PHYS_CACHE;
> +
> +	info->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "qmtm%d", devid);
> +	info->version = DRV_VERSION;
> +
> +	info->priv = qmtm_dev;
> +
> +	/* get the qmtm out of reset */
> +	ret = qmtm_reset(qmtm_dev);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Failed to reset QMTM\n");
> +		goto out_free;
> +	}
> +
> +	/* register with uio framework */
> +	ret = uio_register_device(&pdev->dev, info);
> +	if (ret < 0)
> +		goto out_free;
> +
> +	platform_set_drvdata(pdev, qmtm_dev);
> +	return 0;
> +
> +out_free:
> +	qmtm_cleanup(pdev, qmtm_dev);
> +	return ret;
> +}
> +
> +static int qmtm_remove(struct platform_device *pdev)
> +{
> +	struct uio_qmtm_dev *qmtm_dev = platform_get_drvdata(pdev);
> +
> +	qmtm_cleanup(pdev, qmtm_dev);
> +	return 0;
> +}
> +
> +static struct of_device_id qmtm_match[] = {
> +	{.compatible = "apm,xgene-qmtm",},
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(of, qmtm_match);
> +
> +static struct platform_driver qmtm_driver = {
> +	.driver = {
> +		.name = DRV_NAME,
> +		.owner = THIS_MODULE,

Its not required. It will be updated by *module_platform_driver()*

> +		.of_match_table = qmtm_match,
> +	},
> +	.probe = qmtm_probe,
> +	.remove = qmtm_remove,
> +};
> +
> +module_platform_driver(qmtm_driver);


-- 
Regards,
Varka Bhadram.

  reply	other threads:[~2014-09-30  6:05 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-30  4:26 [PATCH v2 0/6] UIO driver for APM X-Gene QMTM Ankit Jindal
2014-09-30  4:26 ` [PATCH v2 1/6] uio: code style cleanup Ankit Jindal
2014-09-30  4:26 ` [PATCH v2 2/6] uio: Add new UIO_MEM_PHYS_CACHE type for mem regions Ankit Jindal
2014-09-30  4:26 ` [PATCH v2 3/6] Documentation: Update documentation for UIO_MEM_PHYS_CACHE Ankit Jindal
2014-09-30  4:26 ` [PATCH v2 4/6] drivers: uio: Add X-Gene QMTM UIO driver Ankit Jindal
2014-09-30  6:05   ` Varka Bhadram [this message]
2014-10-21  5:52     ` Ankit Jindal
2014-09-30  4:26 ` [PATCH v2 5/6] Documentation: dt-bindings: Add binding info for " Ankit Jindal
2014-09-30  4:26 ` [PATCH v2 6/6] MAINTAINERS: Add entry for APM " Ankit Jindal
     [not found] ` <1412051169-9142-1-git-send-email-ankit.jindal-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-10-09  8:44   ` [PATCH v2 0/6] UIO driver for APM X-Gene QMTM Ankit Jindal
     [not found]     ` <CAPTm99V-xyXa7WQG2jzDz19gotJ0aQRPk_rb5ukvUpdFyFabfw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-10-09 12:06       ` Arnd Bergmann
2014-10-09 12:17         ` Ankit Jindal
     [not found]           ` <CAPTm99WBE7RnGYNZsCfsenYcR3wNSVYOg--90_s1Ji_=Vj5myA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-10-09 12:22             ` Richard Weinberger
     [not found]               ` <CAFLxGvxkL33_TVaf6dT9joC8dzU9uvJVG-GJdDKXPsMVAvQhvw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-10-09 12:30                 ` Ankit Jindal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=542A4825.4070805@gmail.com \
    --to=varkabhadram@gmail.com \
    --cc=ankit.jindal@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hjk@hansjkoch.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=patches@apm.com \
    --cc=robh+dt@kernel.org \
    --cc=tushar.jagad@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).