From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srinivas Kandagatla Subject: Re: [PATCH 2/4] ARM: DT: apq8064: Add usb host support. Date: Tue, 30 Sep 2014 09:16:55 +0100 Message-ID: <542A66F7.2000607@linaro.org> References: <1411982044-7873-1-git-send-email-srinivas.kandagatla@linaro.org> <1411982100-7964-1-git-send-email-srinivas.kandagatla@linaro.org> <20140930051728.GI28481@sonymobile.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20140930051728.GI28481@sonymobile.com> Sender: linux-arm-msm-owner@vger.kernel.org To: Bjorn Andersson Cc: Kumar Gala , "devicetree@vger.kernel.org" , "broonie@kernel.org" , "lee.jones@linaro.org" , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Russell King , "linux-arm-kernel@lists.infradead.org" , "linux-kernel@vger.kernel.org" , "arm@kernel.org" , "linux-arm-msm@vger.kernel.org" List-Id: devicetree@vger.kernel.org On 30/09/14 06:17, Bjorn Andersson wrote: > On Mon 29 Sep 02:15 PDT 2014, Srinivas Kandagatla wrote: > >> This patch adds device tree nodes to support two usb hosts on APQ8064 >> SOC. >> + compatible = "qcom,rpm-pm8921-smps"; >> + reg = ; >> + >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1400000>; >> + qcom,boot-load = <49360>; > > As it was unclear how to handle load in the driver I dropped boot-load for now. > Please leave it out until someone have added it to the driver. Ok, will drop this in next version. > >> + regulator-always-on; > > Why are all these "always-on"? I added this for a regulator which was shared between hdmi and sata, I think for other regualtors this was just a copy paste error. I will recheck it once again and send a new version. thanks, srini > >> + }; >> + >> + }; >> + >> >> /* Temporary fixed regulator */ >> -- >> 1.9.1 >>