From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
To: Dinh Nguyen <dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org,
dougthompson-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org,
bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org,
m.chehab-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-edac-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
tthayer.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: Re: [PATCH 1/3] arm: socfpga: Enable ECC of L2 and OCRAM on startup.
Date: Wed, 1 Oct 2014 16:07:07 -0500 [thread overview]
Message-ID: <542C6CFB.4090809@opensource.altera.com> (raw)
In-Reply-To: <542C3654.1070604-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On 10/01/2014 12:13 PM, Dinh Nguyen wrote:
>
> On 10/1/14, 11:31 AM, tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:
>> From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
>>
>> This patch enables the ECC for L2 cache and OCRAM on machine
>> startup. In both cases, the ECC has to be enabled before data
>> is stored in memory otherwise the ECC will fail on reads.
>>
>> Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
>> ---
>> MAINTAINERS | 6 +++
>> arch/arm/configs/socfpga_defconfig | 1 +
>> arch/arm/mach-socfpga/Makefile | 2 +
>> arch/arm/mach-socfpga/l2_cache.c | 44 +++++++++++++++++++
>> arch/arm/mach-socfpga/l2_cache.h | 28 ++++++++++++
>> arch/arm/mach-socfpga/ocram.c | 84 ++++++++++++++++++++++++++++++++++++
>> arch/arm/mach-socfpga/ocram.h | 28 ++++++++++++
>> arch/arm/mach-socfpga/socfpga.c | 13 +++++-
>> 8 files changed, 205 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/mach-socfpga/l2_cache.c
>> create mode 100644 arch/arm/mach-socfpga/l2_cache.h
>> create mode 100644 arch/arm/mach-socfpga/ocram.c
>> create mode 100644 arch/arm/mach-socfpga/ocram.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 5e7866a..9faf1d3 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -1381,6 +1381,12 @@ M: Dinh Nguyen <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
>> S: Maintained
>> F: drivers/clk/socfpga/
>>
>> +ARM/SOCFPGA EDAC SUPPORT
>> +M: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
>> +S: Maintained
>> +F: arch/arm/mach-socfpga/l2_cache.*
>> +F: arch/arm/mach-socfpga/ocram.*
>> +
>> ARM/STI ARCHITECTURE
>> M: Srinivas Kandagatla <srinivas.kandagatla-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> M: Maxime Coquelin <maxime.coquelin-qxv4g6HH51o@public.gmane.org>
>> diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
>> index d7a5855..e757a33 100644
>> --- a/arch/arm/configs/socfpga_defconfig
>> +++ b/arch/arm/configs/socfpga_defconfig
>> @@ -123,3 +123,4 @@ CONFIG_USB=y
>> CONFIG_USB_DWC2=y
>> CONFIG_USB_DWC2_HOST=y
>> CONFIG_USB_DWC2_PLATFORM=y
>> +CONFIG_SRAM=y
>> \ No newline at end of file
>> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
>> index 6dd7a93..851a144 100644
>> --- a/arch/arm/mach-socfpga/Makefile
>> +++ b/arch/arm/mach-socfpga/Makefile
>> @@ -4,3 +4,5 @@
>>
>> obj-y := socfpga.o
>> obj-$(CONFIG_SMP) += headsmp.o platsmp.o
>> +obj-$(CONFIG_EDAC_ALTERA_OCRAM) += ocram.o
>> +obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o
>> diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c
>> new file mode 100644
>> index 0000000..8e109f3
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/l2_cache.c
>> @@ -0,0 +1,44 @@
>> +/*
>> + * Copyright Altera Corporation (C) 2014. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/clk-provider.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_address.h>
>> +
>> +#include "l2_cache.h"
>> +
>> +void socfpga_init_l2_ecc(void)
>> +{
>> + struct device_node *np;
>> + void __iomem *mapped_l2_edac_addr;
>> +
>> + np = of_find_compatible_node(NULL, NULL, "altr,l2-edac");
>> + if (!np) {
>> + pr_err("SOCFPGA: Unable to find altr,l2-edac in dtb\n");
>> + return;
>> + }
>> +
>> + mapped_l2_edac_addr = of_iomap(np, 0);
>> + if (!mapped_l2_edac_addr) {
>> + pr_err("SOCFPGA: Unable to find L2 ECC mapping in dtb\n");
>> + return;
>> + }
>> +
>> + /* Enable ECC */
>> + writel(0x01, mapped_l2_edac_addr);
>> +
>> + pr_debug("SOCFPGA: Success Initializing L2 cache ECC\n");
>> +}
>> +
>> diff --git a/arch/arm/mach-socfpga/l2_cache.h b/arch/arm/mach-socfpga/l2_cache.h
>> new file mode 100644
>> index 0000000..58e140d
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/l2_cache.h
>> @@ -0,0 +1,28 @@
>> +/*
>> + * Copyright Altera Corporation (C) 2014. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef MACH_SOCFPGA_L2_CACHE_H
>> +#define MACH_SOCFPGA_L2_CACHE_H
>> +
>> +#ifdef CONFIG_EDAC_ALTERA_L2C
>> +void socfpga_init_l2_ecc(void);
>> +#else
>> +inline void socfpga_init_l2_ecc(void)
>> +{
>> +}
>> +#endif
>> +
>> +#endif /* #ifndef MACH_SOCFPGA_L2_CACHE_H */
>> diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
>> new file mode 100644
>> index 0000000..26ec113
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/ocram.c
>> @@ -0,0 +1,84 @@
>> +/*
>> + * Copyright Altera Corporation (C) 2014. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/clk-provider.h>
>> +#include <linux/genalloc.h>
>> +#include <linux/of_platform.h>
>> +
>> +#include "ocram.h"
>> +
>> +void socfpga_init_ocram_ecc(void)
>> +{
>> + struct device_node *np;
>> + const __be32 *prop;
>> + u32 ocr_edac_addr, iram_addr, len;
>> + void __iomem *mapped_ocr_edac_addr;
>> + size_t size;
>> + struct gen_pool *gp;
>> +
>> + np = of_find_compatible_node(NULL, NULL, "altr,ocram-edac");
>> + if (!np) {
>> + pr_err("SOCFPGA: Unable to find altr,ocram-edac in dtb\n");
>> + return;
>> + }
>> +
>> + prop = of_get_property(np, "reg", &size);
>> + ocr_edac_addr = be32_to_cpup(prop++);
>> + len = be32_to_cpup(prop);
>> + if (!prop || size < sizeof(*prop)) {
>> + pr_err("SOCFPGA: Unable to find OCRAM ECC mapping in dtb\n");
>> + return;
>> + }
>> +
>> + gp = of_get_named_gen_pool(np, "iram", 0);
>> + if (!gp) {
>> + pr_err("SOCFPGA: OCRAM cannot find gen pool\n");
>> + return;
>> + }
>> +
>> + np = of_find_compatible_node(NULL, NULL, "mmio-sram");
>> + if (!np) {
>> + pr_err("SOCFPGA: Unable to find mmio-sram in dtb\n");
>> + return;
>> + }
>> + /* Determine the OCRAM address and size */
>> + prop = of_get_property(np, "reg", &size);
>> + iram_addr = be32_to_cpup(prop++);
>> + len = be32_to_cpup(prop);
>> +
>> + if (!prop || size < sizeof(*prop)) {
>> + pr_err("SOCFPGA: Unable to find OCRAM mapping in dtb\n");
>> + return;
>> + }
>> +
>> + iram_addr = gen_pool_alloc(gp, len);
>> + if (iram_addr == 0) {
>> + pr_err("SOCFPGA: cannot alloc from gen pool\n");
>> + return;
>> + }
>> +
>> + memset((void *)iram_addr, 0, len);
>> +
>> + mapped_ocr_edac_addr = ioremap(ocr_edac_addr, 4);
>> +
>> + gen_pool_free(gp, iram_addr, len);
>> +
>> + /* Clear any pending OCRAM ECC interrupts, then enable ECC */
>> + writel(0x18, mapped_ocr_edac_addr);
>> + writel(0x19, mapped_ocr_edac_addr);
>> +
>> + pr_debug("SOCFPGA: Success Initializing OCRAM\n");
>> +}
>> +
>> diff --git a/arch/arm/mach-socfpga/ocram.h b/arch/arm/mach-socfpga/ocram.h
>> new file mode 100644
>> index 0000000..f93cf84
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/ocram.h
>> @@ -0,0 +1,28 @@
>> +/*
>> + * Copyright Altera Corporation (C) 2014. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef MACH_SOCFPGA_OCRAM_H
>> +#define MACH_SOCFPGA_OCRAM_H
>> +
>> +#ifdef CONFIG_EDAC_ALTERA_OCRAM
>> +void socfpga_init_ocram_ecc(void);
>> +#else
>> +inline void socfpga_init_ocram_ecc(void)
>> +{
>> +}
>> +#endif
>> +
>> +#endif /* #ifndef MACH_SOCFPGA_OCRAM_H */
>> diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
>> index adbf383..fb41aca 100644
>> --- a/arch/arm/mach-socfpga/socfpga.c
>> +++ b/arch/arm/mach-socfpga/socfpga.c
>> @@ -1,5 +1,5 @@
>> /*
>> - * Copyright (C) 2012 Altera Corporation
>> + * Copyright (C) 2012;2014 Altera Corporation
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> @@ -25,6 +25,8 @@
>> #include <asm/mach/map.h>
>>
>> #include "core.h"
>> +#include "l2_cache.h"
>> +#include "ocram.h"
>>
>> void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
>> void __iomem *sys_manager_base_addr;
>> @@ -83,6 +85,7 @@ static void __init socfpga_init_irq(void)
>> {
>> irqchip_init();
>> socfpga_sysmgr_init();
>> + socfpga_init_l2_ecc();
>> }
>>
>> static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
>> @@ -98,6 +101,13 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
>> writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL);
>> }
>>
>> +static void __init socfpga_cyclone5_init(void)
>> +{
>> + of_platform_populate(NULL, of_default_bus_match_table,
>> + NULL, NULL);
> Why is this needed?
>
> Dinh
Hi Dinh.
Are you asking why the of_platform_populate() is needed? If so, it is
used to kick off discovery of devices at the root of the tree.
If you're asking about the ocram.* and l2-cache.* files, they're used to
enable ECC on startup.
Thor
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-10-01 21:07 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-01 16:31 [PATCH 0/3] Add Altera peripheral memories to EDAC framework tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
[not found] ` <1412181092-27162-1-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-01 16:31 ` [PATCH 1/3] arm: socfpga: Enable ECC of L2 and OCRAM on startup tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
[not found] ` <1412181092-27162-2-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-01 17:13 ` Dinh Nguyen
[not found] ` <542C3654.1070604-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-10-01 21:07 ` Thor Thayer [this message]
[not found] ` <542C6CFB.4090809-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-01 21:10 ` Dinh Nguyen
[not found] ` <542C6DBB.9060202-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-01 22:18 ` Thor Thayer
[not found] ` <542C7DD0.5030601-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-02 11:38 ` Dinh Nguyen
[not found] ` <542D3918.3040909-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-02 14:32 ` Thor Thayer
2014-10-03 9:51 ` Masami Hiramatsu
[not found] ` <542E71BC.3050606-FCd8Q96Dh0JBDgjK7y7TUQ@public.gmane.org>
2014-10-03 21:42 ` Dinh Nguyen
[not found] ` <542F1833.6070200-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-05 4:18 ` Masami Hiramatsu
[not found] ` <5430C69A.2000601-FCd8Q96Dh0JBDgjK7y7TUQ@public.gmane.org>
2014-10-07 20:20 ` Thor Thayer
2014-10-05 4:21 ` Masami Hiramatsu
[not found] ` <5430C764.8080603-FCd8Q96Dh0JBDgjK7y7TUQ@public.gmane.org>
2014-10-06 14:47 ` Thor Thayer
2014-10-01 16:31 ` [PATCH 2/3] edac: altera: Add Altera L2 Cache and OCRAM EDAC Support tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
[not found] ` <1412181092-27162-3-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-01 16:53 ` Mark Rutland
2014-10-01 19:10 ` Thor Thayer
[not found] ` <542C51BC.5050004-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-02 10:58 ` Mark Rutland
2014-10-03 23:01 ` Thor Thayer
2014-10-01 16:31 ` [PATCH 3/3] arm: dts: Add Altera L2 Cache and OCRAM EDAC tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
[not found] ` <1412181092-27162-4-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-01 16:45 ` Dinh Nguyen
[not found] ` <542C2F9F.6090603-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-10-01 18:38 ` Thor Thayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542C6CFB.4090809@opensource.altera.com \
--to=tthayer-yzvpicuk2abmcg4ihk0kfoh6mc4mb0vx@public.gmane.org \
--cc=bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
--cc=dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=dougthompson-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-edac-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.chehab-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tthayer.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).