Re: [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct

[Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>]

Hi,

On Saturday 25 October 2014 01:55 AM, Felipe Balbi wrote:
> Hi,
> 
> On Fri, Oct 24, 2014 at 10:14:55PM +0200, Sebastian Hesselbarth wrote:
>> On 21.10.2014 11:40, Sebastian Hesselbarth wrote:
>>> On 10/21/2014 11:33 AM, Kishon Vijay Abraham I wrote:
>>>> On Tuesday 21 October 2014 02:37 PM, Sebastian Hesselbarth wrote:
>>>>> Currently, Berlin SATA PHY driver assumes PHY_BASE address being
>>>>> constant. While this PHY_BASE is correct for BG2Q, older BG2 PHY_BASE
>>>>> is different. Prepare the driver for BG2 support by moving the phy_base
>>>>> into private driver data.
>>>>>
>>>>> Acked-by: Antoine Ténart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
>>>>> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>>> ...
>>>>> ---
>>>>>  drivers/phy/phy-berlin-sata.c | 42
>>>>> ++++++++++++++++++++++++++++--------------
>>>>>  1 file changed, 28 insertions(+), 14 deletions(-)
>>>>>
>>>>> diff --git a/drivers/phy/phy-berlin-sata.c
>>>>> b/drivers/phy/phy-berlin-sata.c
>>>>> index 69ced52d72aa..9682b0f66177 100644
>>>>> --- a/drivers/phy/phy-berlin-sata.c
>>>>> +++ b/drivers/phy/phy-berlin-sata.c
>>>>> @@ -30,7 +30,7 @@
>>>>>  #define MBUS_WRITE_REQUEST_SIZE_128    (BIT(2) << 16)
>>>>>  #define MBUS_READ_REQUEST_SIZE_128    (BIT(2) << 19)
>>>>>
>>>>> -#define PHY_BASE        0x200
>>>>> +#define BG2Q_PHY_BASE        0x200
>>> [...]
>>>>> +static u32 bg2q_sata_phy_base = BG2Q_PHY_BASE;
>>>>> +
>>>>> +static const struct of_device_id phy_berlin_sata_of_match[] = {
>>>>> +    {
>>>>> +        .compatible = "marvell,berlin2q-sata-phy",
>>>>> +        .data = &bg2q_sata_phy_base,
>>>>
>>>> Can't the base directly come from dt?
>>>
>>> You are suggesting a "marvell,phy-base-address" property, right?
>>> I have no strong opinion about it, I accept your call (or DT maintainer
>>> ones).
>>
>> Kishon,
>>
>> I still have the DT patches for BG2Q queued up for v3.19 (I missed the
>> arm-soc merge window for v3.18). That means, there has been no release
>> with the phy binding used and I can rework a little more.
>>
>> Can you please confirm that you want a DT property for the phy base address,
>> e.g. marvell,phy-base-address = <{0x200,0x80}> ?
>>
>> If so, I'd also rename the compatible from berlin2q-sata-phy to more
>> generic berlin-sata-phy.
> 
> I think what Kishon is asking, is why this 0x200 offset isn't already on
> reg. so that instead of, e.g.:
> 
> 	reg = <0x40000000 0x1000>;
> 
> you would have:
> 
> 	reg = <0x40000200 0x1000>;

I had something similar to what Sebastian suggested in mind. I think phy_base
is used for a different reason and can't be directly used in 'reg'.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html