From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: Gregory CLEMENT
<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
Sebastian Hesselbarth
<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Thomas Petazzoni
<thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Ezequiel Garcia
<ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Lior Amsalem <alior-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>,
Tawfik Bayouk <tawfik-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>,
Nadav Haklai <nadavh-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v2 4/6] phy: add support for USB cluster on the Armada 375 SoC
Date: Tue, 4 Nov 2014 14:48:07 +0530 [thread overview]
Message-ID: <545899CF.3080001@ti.com> (raw)
In-Reply-To: <1414164254-13053-5-git-send-email-gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Hi,
On Friday 24 October 2014 08:54 PM, Gregory CLEMENT wrote:
> The Armada 375 SoC comes with an USB2 host and device controller and
> an USB3 controller. The USB cluster control register allows to manage
> common features of both USB controllers.
>
> This commit adds a driver integrated in the generic PHY framework to
> control this USB cluster feature.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> ---
> drivers/phy/Kconfig | 6 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-armada375-usb2.c | 145 +++++++++++++++++++++++
> include/dt-bindings/phy/armada-375-usb-cluster.h | 19 +++
> 4 files changed, 171 insertions(+)
> create mode 100644 drivers/phy/phy-armada375-usb2.c
> create mode 100644 include/dt-bindings/phy/armada-375-usb-cluster.h
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 2a436e607f99..625adb0abd43 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -21,6 +21,12 @@ config PHY_BERLIN_SATA
> select GENERIC_PHY
> help
> Enable this to support the SATA PHY on Marvell Berlin SoCs.
> +config ARMADA375_USBCLUSTER_PHY
> + def_bool y
> + depends on MACH_ARMADA_375 || COMPILE_TEST
> + depends on OF
> + select GENERIC_PHY
> +
>
> config PHY_EXYNOS_MIPI_VIDEO
> tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index c4590fce082f..26b5633f378a 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -4,6 +4,7 @@
>
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/phy-armada375-usb2.c
> new file mode 100644
> index 000000000000..7c6daa9029b3
> --- /dev/null
> +++ b/drivers/phy/phy-armada375-usb2.c
> @@ -0,0 +1,145 @@
> +/*
> + * USB cluster support for Armada 375 platform.
> + *
> + * Copyright (C) 2014 Marvell
> + *
> + * Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2 or later. This program is licensed "as is"
> + * without any warranty of any kind, whether express or implied.
> + *
> + * Armada 375 comes with an USB2 host and device controller and an
> + * USB3 controller. The USB cluster control register allows to manage
> + * common features of both USB controllers.
> + */
> +
> +#include <dt-bindings/phy/armada-375-usb-cluster.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +
> +#define USB2_PHY_CONFIG_DISABLE BIT(0)
> +
> +struct armada375_cluster_phy {
> + struct phy *phy;
> + void __iomem *reg;
> + bool use_usb3;
> + int phy_provided;
> +};
> +
> +static struct armada375_cluster_phy usb_cluster_phy;
> +
> +static int armada375_usb_phy_init(struct phy *phy)
> +{
> + struct armada375_cluster_phy *cluster_phy = phy_get_drvdata(phy);
> + u32 reg;
> +
> + reg = readl(cluster_phy->reg);
> + if (cluster_phy->use_usb3)
> + reg |= USB2_PHY_CONFIG_DISABLE;
> + else
> + reg &= ~USB2_PHY_CONFIG_DISABLE;
> + writel(reg, cluster_phy->reg);
> +
> + return 0;
> +}
> +
> +static struct phy_ops armada375_usb_phy_ops = {
> + .init = armada375_usb_phy_init,
> + .owner = THIS_MODULE,
> +};
> +
> +/*
> + * Only one controller can use this PHY. We shouldn't have the case
> + * when two controllers want to use this PHY. But if this case occurs
> + * then we provide a phy to the first one and return an error for the
> + * next one. This error has also to be an error returned by
> + * devm_phy_optional_get() so different from ENODEV for USB2. In the
> + * USB3 case it still optional and we use ENODEV.
> + */
> +static struct phy *armada375_usb_phy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> +
> + /*
> + * Either the phy had never been requested and then the first usb
> + * claiming it can get it, or it had already been requested in
> + * this case, we only allow to use it with the same configuration.
> + */
> + if (WARN_ON((usb_cluster_phy.phy_provided != PHY_NONE) &&
> + (usb_cluster_phy.phy_provided != args->args[0]))) {
> + dev_err(dev, "This PHY has already been provided!\n");
> + dev_err(dev, "Check your device tree, only one controller can use it\n.");
> + if (args->args[0] == PHY_USB2)
> + return ERR_PTR(-EBUSY);
> + else
> + return ERR_PTR(-ENODEV);
> + }
> +
> + if (args->args[0] == PHY_USB2)
> + usb_cluster_phy.use_usb3 = false;
> + else if (args->args[0] == PHY_USB3)
> + usb_cluster_phy.use_usb3 = true;
> + else {
> + dev_err(dev, "Invalid PHY mode\n");
> + return ERR_PTR(-ENODEV);
> + }
> +
> + /* Store which phy mode is used for next test */
> + usb_cluster_phy.phy_provided = args->args[0];
> +
> + return usb_cluster_phy.phy;
> +}
> +
> +static int armada375_usb_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy *phy;
> + struct phy_provider *phy_provider;
> + void __iomem *usb_cluster_base;
> + struct resource *res;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + usb_cluster_base = devm_ioremap_resource(&pdev->dev, res);
> + if (!usb_cluster_base)
> + return -ENOMEM;
> +
> + phy = devm_phy_create(dev, NULL, &armada375_usb_phy_ops, NULL);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(phy);
> + }
> +
> + usb_cluster_phy.phy = phy;
> + usb_cluster_phy.reg = usb_cluster_base;
> + phy_set_drvdata(phy, &usb_cluster_phy);
> +
> + phy_provider = devm_of_phy_provider_register(&pdev->dev,
> + armada375_usb_phy_xlate);
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id of_usb_cluster_table[] = {
> + { .compatible = "marvell,armada-375-usb-cluster", },
> + { /* end of list */ },
> +};
> +MODULE_DEVICE_TABLE(of, of_usb_cluster_table);
> +
> +static struct platform_driver armada375_usb_phy_driver = {
> + .probe = armada375_usb_phy_probe,
> + .driver = {
> + .of_match_table = of_usb_cluster_table,
> + .name = "armada-375-usb-cluster",
> + .owner = THIS_MODULE,
> + }
> +};
> +module_platform_driver(armada375_usb_phy_driver);
> +
> +MODULE_DESCRIPTION("Armada 375 USB cluster driver");
> +MODULE_AUTHOR("Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>");
> +MODULE_LICENSE("GPL");
> diff --git a/include/dt-bindings/phy/armada-375-usb-cluster.h b/include/dt-bindings/phy/armada-375-usb-cluster.h
> new file mode 100644
> index 000000000000..cbd2d4e720bb
> --- /dev/null
> +++ b/include/dt-bindings/phy/armada-375-usb-cluster.h
> @@ -0,0 +1,19 @@
> +/*
> + * Copyright (C) 2014 Marvell
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + */
> +
> +#ifndef __ARMADA_375_USB_CLUSTER__
> +#define __ARMADA_375_USB_CLUSTER__
> +
> +/* The supported mode passed through by the phandle are the following */
> +
> +#define PHY_NONE 0
> +#define PHY_USB2 1
> +#define PHY_USB3 2
Let's not add a separate file for every platform for these generic modes.
Thanks
Kishon
> +
> +#endif /* __DT_BINDINGS_CLOCK_R8A7791_H__ */
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-11-04 9:18 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-24 15:24 [PATCH v2 0/6] Add support for USB cluster(PHY muxer) on the Armada 375 Gregory CLEMENT
2014-10-24 15:24 ` [PATCH v2 1/6] phy: Use PTR_ERR_OR_ZERO to fix warning raised by coccinelle Gregory CLEMENT
2014-10-24 15:24 ` [PATCH v2 2/6] Phy: DT binding documentation for Marvell MVEBU SATA phy Gregory CLEMENT
2014-10-24 15:24 ` [PATCH v2 3/6] Phy: DT binding documentation for the Armada 375 USB cluster binding Gregory CLEMENT
2014-10-24 15:24 ` [PATCH v2 4/6] phy: add support for USB cluster on the Armada 375 SoC Gregory CLEMENT
[not found] ` <1414164254-13053-5-git-send-email-gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2014-11-04 9:18 ` Kishon Vijay Abraham I [this message]
[not found] ` <545899CF.3080001-l0cyMroinI0@public.gmane.org>
2014-11-11 10:14 ` Kishon Vijay Abraham I
2014-11-12 8:18 ` Gregory CLEMENT
2014-10-24 15:24 ` [PATCH v2 5/6] ARM: mvebu: add Device Tree description of USB cluster controller on Armada 375 Gregory CLEMENT
[not found] ` <1414164254-13053-6-git-send-email-gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2014-11-04 6:25 ` Kishon Vijay Abraham I
2014-10-24 15:24 ` [PATCH v2 6/6] ARM: mvebu: add PHY support to the dts for the USB controllers " Gregory CLEMENT
[not found] ` <1414164254-13053-1-git-send-email-gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2014-11-01 22:46 ` [PATCH v2 0/6] Add support for USB cluster(PHY muxer) on the " Jason Cooper
[not found] ` <20141101224647.GD3698-u4khhh1J0LxI1Ri9qeTfzeTW4wlIGRCZ@public.gmane.org>
2014-11-03 16:48 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545899CF.3080001@ti.com \
--to=kishon-l0cymroini0@public.gmane.org \
--cc=alior-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
--cc=andrew-g2DYL2Zd6BY@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=nadavh-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=tawfik-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
--cc=thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).