devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans Verkuil <hverkuil@xs4all.nl>
To: Sebastian Reichel <sre@kernel.org>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	linux-media@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [RFCv2 0/8] [media] si4713 DT binding
Date: Fri, 07 Nov 2014 13:49:42 +0100	[thread overview]
Message-ID: <545CBFE6.3070201@xs4all.nl> (raw)
In-Reply-To: <1413904027-16767-1-git-send-email-sre@kernel.org>

On 10/21/14 17:06, Sebastian Reichel wrote:
> Hi,
> 
> This is the RFCv2 patchset adding DT support to the si4713
> radio transmitter i2c driver. The changes can be summarized
> as follows:
> 
>  * Move regulator information back into the driver. The
>    regulators needed are documented in the chip and have
>    nothing to do with boarddata. Instead devm_regulator_get_optional
>    is used and errors are handled quite loosely now. Maybe the USB
>    driver should provide dummy regulators.
>  * GPIO handling is updated to gpiod consumer interface, resulting
>    in a driver cleanup and easy DT handling
>  * The driver is updated to use managed resources wherever possible
> 
> So much about the nice stuff. But there is also
> 
>  * Instantiation of the platform device from the i2c (sub-)device. Since DT
>    is not supposed to contain linuxisms the device is a simple i2c node
>    resulting in the i2c probe function being called. Thus registering the main
>    v4l device must happen from there.
> 
> Tested:
>  * Compilation on torvalds/linux.git:master (based on 52d589a)
>  * Booting in DT mode
>  * Some simply driver queries using v4l2-ctl
> 
> Not tested:
>  * The USB driver, since I do not own the USB dongle

I will test this on Monday for the USB device. It looks good, but I need
to verify that it doesn't break the USB driver.

Regards,

	Hans

>  * The legacy platform code (only DT boot has been tested).
>    (The legacy platform code is supposed to removed in the near future anyways)
> 
> Changes since RFCv1 (requested by Hans Verkuil):
>  - splitted the patchset into more patches
>  - replaced dev_info with dev_dbg for missing regulators
>  - check for ENOSYS value from devm_gpiod_get (disabled GPIOLIB)
> 
> -- Sebastian
> 
> Sebastian Reichel (8):
>   [media] si4713: switch to devm regulator API
>   [media] si4713: switch reset gpio to devm_gpiod API
>   [media] si4713: use managed memory allocation
>   [media] si4713: use managed irq request
>   [media] si4713: add device tree support
>   [media] si4713: add DT binding documentation
>   ARM: OMAP2: RX-51: update si4713 platform data
>   [media] si4713: cleanup platform data
> 
>  Documentation/devicetree/bindings/media/si4713.txt |  30 ++++
>  arch/arm/mach-omap2/board-rx51-peripherals.c       |  69 ++++-----
>  drivers/media/radio/si4713/radio-platform-si4713.c |  28 +---
>  drivers/media/radio/si4713/si4713.c                | 167 +++++++++++++--------
>  drivers/media/radio/si4713/si4713.h                |  15 +-
>  include/media/radio-si4713.h                       |  30 ----
>  include/media/si4713.h                             |   4 +-
>  7 files changed, 186 insertions(+), 157 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/si4713.txt
>  delete mode 100644 include/media/radio-si4713.h
> 

  parent reply	other threads:[~2014-11-07 12:49 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-21 15:06 [RFCv2 0/8] [media] si4713 DT binding Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 1/8] [media] si4713: switch to devm regulator API Sebastian Reichel
     [not found]   ` <1413904027-16767-2-git-send-email-sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-11-11 11:07     ` Mauro Carvalho Chehab
2014-11-11 14:33       ` Sebastian Reichel
2014-11-11 17:59       ` Hans Verkuil
     [not found]         ` <54624E83.1060404-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org>
2014-11-11 22:12           ` Mauro Carvalho Chehab
2014-10-21 15:07 ` [RFCv2 2/8] [media] si4713: switch reset gpio to devm_gpiod API Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 3/8] [media] si4713: use managed memory allocation Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 4/8] [media] si4713: use managed irq request Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 5/8] [media] si4713: add device tree support Sebastian Reichel
     [not found]   ` <1413904027-16767-6-git-send-email-sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-11-04 21:47     ` Sakari Ailus
2014-11-10 20:58       ` Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 6/8] [media] si4713: add DT binding documentation Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 7/8] ARM: OMAP2: RX-51: update si4713 platform data Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 8/8] [media] si4713: cleanup " Sebastian Reichel
2014-11-07 12:49 ` Hans Verkuil [this message]
2014-11-10 11:06   ` [RFCv2 0/8] [media] si4713 DT binding Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=545CBFE6.3070201@xs4all.nl \
    --to=hverkuil@xs4all.nl \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=hans.verkuil@cisco.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).