Re: [PATCH v4 06/10] ARM: dts: am4372: Add DCAN nodes

[Marc Kleine-Budde <mkl@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 1628 bytes --]

On 11/13/2014 01:22 PM, Roger Quadros wrote:
> The SoC contains 2 DCAN modules. Add them.
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>  arch/arm/boot/dts/am4372.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index 899c57c..12fb1db 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -901,6 +901,28 @@
>  			compatible = "mmio-sram";
>  			reg = <0x40300000 0x40000>; /* 256k */
>  		};
> +
> +		dcan0: can@481cc000 {
> +			compatible = "ti,am3352-d_can";

You should add "ti,am4372-d_can" as first compatible here.

> +			ti,hwmods = "d_can0";
> +			clocks = <&dcan0_fck>;
> +			clock-names = "fck";
> +			reg = <0x481cc000 0x2000>;
> +			syscon-raminit = <&am43xx_control_module 0x644 0>;
> +			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		dcan1: can@481d0000 {
> +			compatible = "ti,am3352-d_can";

Same here.

> +			ti,hwmods = "d_can1";
> +			clocks = <&dcan1_fck>;
> +			clock-names = "fck";
> +			reg = <0x481d0000 0x2000>;
> +			syscon-raminit = <&am43xx_control_module 0x644 1>;
> +			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
>  	};
>  };
>  
> 

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]