[PATCH V5 0/4] MIPS: GIC device-tree support

[PATCH V5 0/4] MIPS: GIC device-tree support

[Andrew Bresticker]

This series add support for mapping and routing GIC interrupts as well
as setting up the GIC timer through device-tree.  Patches 1 adds the
"mti" vendor prefix, patch 2 adds the GIC binding document, and patches
3 and 4 add device-tree support for the GIC irqchip and clocksource drivers,
respectively.

Based on next-20141028, which includes part 1 [0] and part 2 [1] of my
GIC cleanup series.

Changes from v4:
 - don't probe clocksource from irqchip; just WARN() if device-tree
   is incorrect

Changes from v3:
 - dropped the CPU name from the compatible string
 - replaced available-cpu-vectors property with reserved-cpu-vectors
 - made reg property optional
 - probed GIC timer from GIC irqchip driver

Changes from v2:
 - added back third cell to specifier to differentiate between shared and
   local interrupts
 - added timer sub-node and it's properties
 - changed compatible string to include CPU version
 - rebased on GIC cleanup series

Changes from v1:
 - updated bindings to drop third interrupt cell and remove CPU interrupt
   controller as the parent of the GIC
 - moved GIC to drivers/irqchip/
 - other minor fixes/cleanups

[0] https://lkml.org/lkml/2014/9/18/487
[1] https://lkml.org/lkml/2014/10/20/481

Andrew Bresticker (4):
  of: Add vendor prefix for MIPS Technologies, Inc.
  of: Add binding document for MIPS GIC
  irqchip: mips-gic: Add device-tree support
  clocksource: mips-gic: Add device-tree support

 .../bindings/interrupt-controller/mips-gic.txt     | 55 +++++++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 drivers/clocksource/Kconfig                        |  1 +
 drivers/clocksource/mips-gic-timer.c               | 41 ++++++++--
 drivers/irqchip/irq-mips-gic.c                     | 92 ++++++++++++++++++++--
 .../dt-bindings/interrupt-controller/mips-gic.h    |  9 +++
 6 files changed, 187 insertions(+), 12 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
 create mode 100644 include/dt-bindings/interrupt-controller/mips-gic.h

-- 
2.1.0.rc2.206.gedb03e5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V5 1/4] of: Add vendor prefix for MIPS Technologies, Inc.

[Andrew Bresticker]

Add the vendor prefix "mti" for MIPS Technologies, Inc.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
I'll update the users of the "mips" prefix to use "mti" instead once
this lands.

No changes from v2/v3/v4.
New for v2.
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 0979393..0221b49 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -98,6 +98,7 @@ mitsubishi	Mitsubishi Electric Corporation
 mosaixtech	Mosaix Technologies, Inc.
 moxa	Moxa
 mpl	MPL AG
+mti	MIPS Technologies, Inc.
 mundoreader	Mundo Reader S.L.
 murata	Murata Manufacturing Co., Ltd.
 mxicy	Macronix International Co., Ltd.
-- 
2.1.0.rc2.206.gedb03e5

Re: [PATCH V5 1/4] of: Add vendor prefix for MIPS Technologies, Inc.

[Ralf Baechle]

On Wed, Nov 12, 2014 at 11:43:36AM -0800, Andrew Bresticker wrote:

> Add the vendor prefix "mti" for MIPS Technologies, Inc.
> 
> Signed-off-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> ---
> I'll update the users of the "mips" prefix to use "mti" instead once
> this lands.
> 
> No changes from v2/v3/v4.
> New for v2.
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 0979393..0221b49 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -98,6 +98,7 @@ mitsubishi	Mitsubishi Electric Corporation
>  mosaixtech	Mosaix Technologies, Inc.
>  moxa	Moxa
>  mpl	MPL AG
> +mti	MIPS Technologies, Inc.
>  mundoreader	Mundo Reader S.L.
>  murata	Murata Manufacturing Co., Ltd.
>  mxicy	Macronix International Co., Ltd.

Your patch does almost the same as

  https://patchwork.linux-mips.org/patch/8169/

which I already applied and which adds:

+mti    Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)

  Ralf
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V5 2/4] of: Add binding document for MIPS GIC

[Andrew Bresticker]

The Global Interrupt Controller (GIC) present on certain MIPS systems
can be used to route external interrupts to individual VPEs and CPU
interrupt vectors.  It also supports a timer and software-generated
interrupts.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
No changes from v4.
Changes from v3:
 - removed CPU name from compatible string
 - removed available-cpu-vectors, added reserved-cpu-vectors
 - made reg property optional
Changes from v2:
 - added third cell to specify local vs. shared
 - added documentation for timer sub-node
 - changed compatible string to include CPU version
Changes from v1:
 - moved from mips/ to interrupt-controller/
 - removed interrupts and interrupt-parent properties
 - added available-cpu-vectors property
 - dropped third cell in interrupt specifier
---
 .../bindings/interrupt-controller/mips-gic.txt     | 55 ++++++++++++++++++++++
 .../dt-bindings/interrupt-controller/mips-gic.h    |  9 ++++
 2 files changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
 create mode 100644 include/dt-bindings/interrupt-controller/mips-gic.h

diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
new file mode 100644
index 0000000..5a65478
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
@@ -0,0 +1,55 @@
+MIPS Global Interrupt Controller (GIC)
+
+The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+It also supports local (per-processor) interrupts and software-generated
+interrupts which can be used as IPIs.  The GIC also includes a free-running
+global timer, per-CPU count/compare timers, and a watchdog.
+
+Required properties:
+- compatible : Should be "mti,gic".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt specifier.  Should be 3.
+  - The first cell is the type of interrupt, local or shared.
+    See <include/dt-bindings/interrupt-controller/mips-gic.h>.
+  - The second cell is the GIC interrupt number.
+  - The third cell encodes the interrupt flags.
+    See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
+    flags.
+
+Optional properties:
+- reg : Base address and length of the GIC registers.  If not present,
+  the base address reported by the hardware GCR_GIC_BASE will be used.
+- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
+  to which the GIC may not route interrupts.  Valid values are 2 - 7.
+  This property is ignored if the CPU is started in EIC mode.
+
+Required properties for timer sub-node:
+- compatible : Should be "mti,gic-timer".
+- interrupts : Interrupt for the GIC local timer.
+- clock-frequency : Clock frequency at which the GIC timers operate.
+
+Example:
+
+	gic: interrupt-controller@1bdc0000 {
+		compatible = "mti,gic";
+		reg = <0x1bdc0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		mti,reserved-cpu-vectors = <7>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	uart@18101400 {
+		...
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
diff --git a/include/dt-bindings/interrupt-controller/mips-gic.h b/include/dt-bindings/interrupt-controller/mips-gic.h
new file mode 100644
index 0000000..cf35a57
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/mips-gic.h
@@ -0,0 +1,9 @@
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define GIC_SHARED 0
+#define GIC_LOCAL 1
+
+#endif
-- 
2.1.0.rc2.206.gedb03e5

Re: [PATCH V5 2/4] of: Add binding document for MIPS GIC

[Ralf Baechle]

On Wed, Nov 12, 2014 at 11:43:37AM -0800, Andrew Bresticker wrote:

Patches 2-4 queud for 3.19.

Thanks,

  Ralf
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V5 3/4] irqchip: mips-gic: Add device-tree support

[Andrew Bresticker]

Add device-tree support for the MIPS GIC.  Update the GIC irqdomain's
xlate() callback to handle the three-cell specifier described in the
MIPS GIC binding document.

Signed-off-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
---
No changes from v4.
Changes from v3:
 - use reserved-cpu-vectors property
 - read GIC base from CM if no reg property present
Changes from v2:
 - rebased on GIC irqchip cleanups
 - updated for change in bindings
 - only parse first CPU vector
 - allow platforms to use EIC mode
Changes from v1:
 - updated for change in bindings
 - set base address and enable bit in GCR_GIC_BASE
---
 drivers/irqchip/irq-mips-gic.c | 92 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 87 insertions(+), 5 deletions(-)

diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index 61ac482..8a9ef74 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -12,12 +12,18 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqchip/mips-gic.h>
+#include <linux/of_address.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 
+#include <asm/mips-cm.h>
 #include <asm/setup.h>
 #include <asm/traps.h>
 
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+#include "irqchip.h"
+
 unsigned int gic_present;
 
 struct gic_pcpu_mask {
@@ -662,14 +668,34 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int virq,
 	return gic_shared_irq_domain_map(d, virq, hw);
 }
 
+static int gic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
+				const u32 *intspec, unsigned int intsize,
+				irq_hw_number_t *out_hwirq,
+				unsigned int *out_type)
+{
+	if (intsize != 3)
+		return -EINVAL;
+
+	if (intspec[0] == GIC_SHARED)
+		*out_hwirq = GIC_SHARED_TO_HWIRQ(intspec[1]);
+	else if (intspec[0] == GIC_LOCAL)
+		*out_hwirq = GIC_LOCAL_TO_HWIRQ(intspec[1]);
+	else
+		return -EINVAL;
+	*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
+
+	return 0;
+}
+
 static struct irq_domain_ops gic_irq_domain_ops = {
 	.map = gic_irq_domain_map,
-	.xlate = irq_domain_xlate_twocell,
+	.xlate = gic_irq_domain_xlate,
 };
 
-void __init gic_init(unsigned long gic_base_addr,
-		     unsigned long gic_addrspace_size, unsigned int cpu_vec,
-		     unsigned int irqbase)
+static void __init __gic_init(unsigned long gic_base_addr,
+			      unsigned long gic_addrspace_size,
+			      unsigned int cpu_vec, unsigned int irqbase,
+			      struct device_node *node)
 {
 	unsigned int gicconfig;
 
@@ -695,7 +721,7 @@ void __init gic_init(unsigned long gic_base_addr,
 					gic_irq_dispatch);
 	}
 
-	gic_irq_domain = irq_domain_add_simple(NULL, GIC_NUM_LOCAL_INTRS +
+	gic_irq_domain = irq_domain_add_simple(node, GIC_NUM_LOCAL_INTRS +
 					       gic_shared_intrs, irqbase,
 					       &gic_irq_domain_ops, NULL);
 	if (!gic_irq_domain)
@@ -705,3 +731,59 @@ void __init gic_init(unsigned long gic_base_addr,
 
 	gic_ipi_init();
 }
+
+void __init gic_init(unsigned long gic_base_addr,
+		     unsigned long gic_addrspace_size,
+		     unsigned int cpu_vec, unsigned int irqbase)
+{
+	__gic_init(gic_base_addr, gic_addrspace_size, cpu_vec, irqbase, NULL);
+}
+
+static int __init gic_of_init(struct device_node *node,
+			      struct device_node *parent)
+{
+	struct resource res;
+	unsigned int cpu_vec, i = 0, reserved = 0;
+	phys_addr_t gic_base;
+	size_t gic_len;
+
+	/* Find the first available CPU vector. */
+	while (!of_property_read_u32_index(node, "mti,reserved-cpu-vectors",
+					   i++, &cpu_vec))
+		reserved |= BIT(cpu_vec);
+	for (cpu_vec = 2; cpu_vec < 8; cpu_vec++) {
+		if (!(reserved & BIT(cpu_vec)))
+			break;
+	}
+	if (cpu_vec == 8) {
+		pr_err("No CPU vectors available for GIC\n");
+		return -ENODEV;
+	}
+
+	if (of_address_to_resource(node, 0, &res)) {
+		/*
+		 * Probe the CM for the GIC base address if not specified
+		 * in the device-tree.
+		 */
+		if (mips_cm_present()) {
+			gic_base = read_gcr_gic_base() &
+				~CM_GCR_GIC_BASE_GICEN_MSK;
+			gic_len = 0x20000;
+		} else {
+			pr_err("Failed to get GIC memory range\n");
+			return -ENODEV;
+		}
+	} else {
+		gic_base = res.start;
+		gic_len = resource_size(&res);
+	}
+
+	if (mips_cm_present())
+		write_gcr_gic_base(gic_base | CM_GCR_GIC_BASE_GICEN_MSK);
+	gic_present = true;
+
+	__gic_init(gic_base, gic_len, cpu_vec, 0, node);
+
+	return 0;
+}
+IRQCHIP_DECLARE(mips_gic, "mti,gic", gic_of_init);
-- 
2.1.0.rc2.206.gedb03e5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V5 4/4] clocksource: mips-gic: Add device-tree support

[Andrew Bresticker]

Parse the GIC timer frequency and interrupt from the device-tree.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
Changes from v4:
 - don't probe from irqchip; just warn if DT is wrong
Changes from v3:
 - probe from GIC irqchip
New for v3.
---
 drivers/clocksource/Kconfig          |  1 +
 drivers/clocksource/mips-gic-timer.c | 41 ++++++++++++++++++++++++++++++------
 2 files changed, 35 insertions(+), 7 deletions(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cb7e7f4..89836dc 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -226,5 +226,6 @@ config CLKSRC_VERSATILE
 config CLKSRC_MIPS_GIC
 	bool
 	depends on MIPS_GIC
+	select CLKSRC_OF
 
 endmenu
diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index a749c81..3bd31b1 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -11,6 +11,7 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip/mips-gic.h>
 #include <linux/notifier.h>
+#include <linux/of_irq.h>
 #include <linux/percpu.h>
 #include <linux/smp.h>
 #include <linux/time.h>
@@ -101,8 +102,6 @@ static int gic_clockevent_init(void)
 	if (!cpu_has_counter || !gic_frequency)
 		return -ENXIO;
 
-	gic_timer_irq = MIPS_GIC_IRQ_BASE +
-		GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
 	setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction);
 
 	register_cpu_notifier(&gic_cpu_nb);
@@ -123,17 +122,45 @@ static struct clocksource gic_clocksource = {
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-void __init gic_clocksource_init(unsigned int frequency)
+static void __init __gic_clocksource_init(void)
 {
-	gic_frequency = frequency;
-
 	/* Set clocksource mask. */
 	gic_clocksource.mask = CLOCKSOURCE_MASK(gic_get_count_width());
 
 	/* Calculate a somewhat reasonable rating value. */
-	gic_clocksource.rating = 200 + frequency / 10000000;
+	gic_clocksource.rating = 200 + gic_frequency / 10000000;
 
-	clocksource_register_hz(&gic_clocksource, frequency);
+	clocksource_register_hz(&gic_clocksource, gic_frequency);
 
 	gic_clockevent_init();
 }
+
+void __init gic_clocksource_init(unsigned int frequency)
+{
+	gic_frequency = frequency;
+	gic_timer_irq = MIPS_GIC_IRQ_BASE +
+		GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
+
+	__gic_clocksource_init();
+}
+
+static void __init gic_clocksource_of_init(struct device_node *node)
+{
+	if (WARN_ON(!gic_present || !node->parent ||
+		    !of_device_is_compatible(node->parent, "mti,gic")))
+		return;
+
+	if (of_property_read_u32(node, "clock-frequency", &gic_frequency)) {
+		pr_err("GIC frequency not specified.\n");
+		return;
+	}
+	gic_timer_irq = irq_of_parse_and_map(node, 0);
+	if (!gic_timer_irq) {
+		pr_err("GIC timer IRQ not specified.\n");
+		return;
+	}
+
+	__gic_clocksource_init();
+}
+CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
+		       gic_clocksource_of_init);
-- 
2.1.0.rc2.206.gedb03e5

Re: [PATCH V5 4/4] clocksource: mips-gic: Add device-tree support

[Daniel Lezcano]

On 11/12/2014 08:43 PM, Andrew Bresticker wrote:
> Parse the GIC timer frequency and interrupt from the device-tree.
>
> Signed-off-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>

Hi Andrew,

through which tree is this patch supposed to go ?

Is there any dependency ?

> ---
> Changes from v4:
>   - don't probe from irqchip; just warn if DT is wrong
> Changes from v3:
>   - probe from GIC irqchip
> New for v3.
> ---
>   drivers/clocksource/Kconfig          |  1 +
>   drivers/clocksource/mips-gic-timer.c | 41 ++++++++++++++++++++++++++++++------
>   2 files changed, 35 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index cb7e7f4..89836dc 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -226,5 +226,6 @@ config CLKSRC_VERSATILE
>   config CLKSRC_MIPS_GIC
>   	bool
>   	depends on MIPS_GIC
> +	select CLKSRC_OF
>
>   endmenu
> diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
> index a749c81..3bd31b1 100644
> --- a/drivers/clocksource/mips-gic-timer.c
> +++ b/drivers/clocksource/mips-gic-timer.c
> @@ -11,6 +11,7 @@
>   #include <linux/interrupt.h>
>   #include <linux/irqchip/mips-gic.h>
>   #include <linux/notifier.h>
> +#include <linux/of_irq.h>
>   #include <linux/percpu.h>
>   #include <linux/smp.h>
>   #include <linux/time.h>
> @@ -101,8 +102,6 @@ static int gic_clockevent_init(void)
>   	if (!cpu_has_counter || !gic_frequency)
>   		return -ENXIO;
>
> -	gic_timer_irq = MIPS_GIC_IRQ_BASE +
> -		GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
>   	setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction);
>
>   	register_cpu_notifier(&gic_cpu_nb);
> @@ -123,17 +122,45 @@ static struct clocksource gic_clocksource = {
>   	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
>   };
>
> -void __init gic_clocksource_init(unsigned int frequency)
> +static void __init __gic_clocksource_init(void)
>   {
> -	gic_frequency = frequency;
> -
>   	/* Set clocksource mask. */
>   	gic_clocksource.mask = CLOCKSOURCE_MASK(gic_get_count_width());
>
>   	/* Calculate a somewhat reasonable rating value. */
> -	gic_clocksource.rating = 200 + frequency / 10000000;
> +	gic_clocksource.rating = 200 + gic_frequency / 10000000;
>
> -	clocksource_register_hz(&gic_clocksource, frequency);
> +	clocksource_register_hz(&gic_clocksource, gic_frequency);
>
>   	gic_clockevent_init();
>   }
> +
> +void __init gic_clocksource_init(unsigned int frequency)
> +{
> +	gic_frequency = frequency;
> +	gic_timer_irq = MIPS_GIC_IRQ_BASE +
> +		GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
> +
> +	__gic_clocksource_init();
> +}
> +
> +static void __init gic_clocksource_of_init(struct device_node *node)
> +{
> +	if (WARN_ON(!gic_present || !node->parent ||
> +		    !of_device_is_compatible(node->parent, "mti,gic")))
> +		return;
> +
> +	if (of_property_read_u32(node, "clock-frequency", &gic_frequency)) {
> +		pr_err("GIC frequency not specified.\n");
> +		return;
> +	}
> +	gic_timer_irq = irq_of_parse_and_map(node, 0);
> +	if (!gic_timer_irq) {
> +		pr_err("GIC timer IRQ not specified.\n");
> +		return;
> +	}
> +
> +	__gic_clocksource_init();
> +}
> +CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
> +		       gic_clocksource_of_init);
>


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V5 4/4] clocksource: mips-gic: Add device-tree support

[Andrew Bresticker]

On Mon, Nov 17, 2014 at 1:21 PM, Daniel Lezcano
<daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> On 11/12/2014 08:43 PM, Andrew Bresticker wrote:
>>
>> Parse the GIC timer frequency and interrupt from the device-tree.
>>
>> Signed-off-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
>> Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
>
>
> Hi Andrew,
>
> through which tree is this patch supposed to go ?
>
> Is there any dependency ?

There are quite a few dependencies, so this series and all the other
MIPS GIC stuff is going through the MIPS tree.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V5 4/4] clocksource: mips-gic: Add device-tree support

[Daniel Lezcano]

On 11/17/2014 10:26 PM, Andrew Bresticker wrote:
> On Mon, Nov 17, 2014 at 1:21 PM, Daniel Lezcano
> <daniel.lezcano@linaro.org> wrote:
>> On 11/12/2014 08:43 PM, Andrew Bresticker wrote:
>>>
>>> Parse the GIC timer frequency and interrupt from the device-tree.
>>>
>>> Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
>>> Acked-by: Arnd Bergmann <arnd@arndb.de>
>>
>>
>> Hi Andrew,
>>
>> through which tree is this patch supposed to go ?
>>
>> Is there any dependency ?
>
> There are quite a few dependencies, so this series and all the other
> MIPS GIC stuff is going through the MIPS tree.

Ok thanks.

   -- Daniel


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH V5 4/4] clocksource: mips-gic: Add device-tree support

[Daniel Lezcano]

On 11/12/2014 08:43 PM, Andrew Bresticker wrote:
> Parse the GIC timer frequency and interrupt from the device-tree.
>
> Signed-off-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>

Acked-by: Daniel Lezcano <daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

> ---
> Changes from v4:
>   - don't probe from irqchip; just warn if DT is wrong
> Changes from v3:
>   - probe from GIC irqchip
> New for v3.
> ---
>   drivers/clocksource/Kconfig          |  1 +
>   drivers/clocksource/mips-gic-timer.c | 41 ++++++++++++++++++++++++++++++------
>   2 files changed, 35 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index cb7e7f4..89836dc 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -226,5 +226,6 @@ config CLKSRC_VERSATILE
>   config CLKSRC_MIPS_GIC
>   	bool
>   	depends on MIPS_GIC
> +	select CLKSRC_OF
>
>   endmenu
> diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
> index a749c81..3bd31b1 100644
> --- a/drivers/clocksource/mips-gic-timer.c
> +++ b/drivers/clocksource/mips-gic-timer.c
> @@ -11,6 +11,7 @@
>   #include <linux/interrupt.h>
>   #include <linux/irqchip/mips-gic.h>
>   #include <linux/notifier.h>
> +#include <linux/of_irq.h>
>   #include <linux/percpu.h>
>   #include <linux/smp.h>
>   #include <linux/time.h>
> @@ -101,8 +102,6 @@ static int gic_clockevent_init(void)
>   	if (!cpu_has_counter || !gic_frequency)
>   		return -ENXIO;
>
> -	gic_timer_irq = MIPS_GIC_IRQ_BASE +
> -		GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
>   	setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction);
>
>   	register_cpu_notifier(&gic_cpu_nb);
> @@ -123,17 +122,45 @@ static struct clocksource gic_clocksource = {
>   	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
>   };
>
> -void __init gic_clocksource_init(unsigned int frequency)
> +static void __init __gic_clocksource_init(void)
>   {
> -	gic_frequency = frequency;
> -
>   	/* Set clocksource mask. */
>   	gic_clocksource.mask = CLOCKSOURCE_MASK(gic_get_count_width());
>
>   	/* Calculate a somewhat reasonable rating value. */
> -	gic_clocksource.rating = 200 + frequency / 10000000;
> +	gic_clocksource.rating = 200 + gic_frequency / 10000000;
>
> -	clocksource_register_hz(&gic_clocksource, frequency);
> +	clocksource_register_hz(&gic_clocksource, gic_frequency);
>
>   	gic_clockevent_init();
>   }
> +
> +void __init gic_clocksource_init(unsigned int frequency)
> +{
> +	gic_frequency = frequency;
> +	gic_timer_irq = MIPS_GIC_IRQ_BASE +
> +		GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
> +
> +	__gic_clocksource_init();
> +}
> +
> +static void __init gic_clocksource_of_init(struct device_node *node)
> +{
> +	if (WARN_ON(!gic_present || !node->parent ||
> +		    !of_device_is_compatible(node->parent, "mti,gic")))
> +		return;
> +
> +	if (of_property_read_u32(node, "clock-frequency", &gic_frequency)) {
> +		pr_err("GIC frequency not specified.\n");
> +		return;
> +	}
> +	gic_timer_irq = irq_of_parse_and_map(node, 0);
> +	if (!gic_timer_irq) {
> +		pr_err("GIC timer IRQ not specified.\n");
> +		return;
> +	}
> +
> +	__gic_clocksource_init();
> +}
> +CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
> +		       gic_clocksource_of_init);
>


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html