[PATCH v2 1/5] ARM: dts: exynos5410: Clean up SMDK5410 indentation

[PATCH v2 1/5] ARM: dts: exynos5410: Clean up SMDK5410 indentation

[Andreas Färber]

The UART status properties are indented one level too deep, and we want
to derive a device tree for the ODROID-XU. Fix this before it propagates.

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1 -> v2: Unchanged

 arch/arm/boot/dts/exynos5410-smdk5410.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index be3e02530b42..cebeaab3abec 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -62,13 +62,13 @@
 };
 
 &uart0 {
-		status = "okay";
+	status = "okay";
 };
 
 &uart1 {
-		status = "okay";
+	status = "okay";
 };
 
 &uart2 {
-		status = "okay";
+	status = "okay";
 };
-- 
2.1.2

[PATCH v2 2/5] ARM: dts: exynos5410: Prepare ODROID-XU device tree

[Andreas Färber]

Derived from exynos5410-smdk5410.dts.

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1 -> v2: Unchanged

 arch/arm/boot/dts/Makefile                |  1 +
 arch/arm/boot/dts/exynos5410-odroidxu.dts | 78 +++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91cd4d08b7f1..5b7cddbcb959 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-rinato.dtb \
 	exynos5250-snow.dtb \
 	exynos5250-spring.dtb \
 	exynos5260-xyref5260.dtb \
+	exynos5410-odroidxu.dtb \
 	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
new file mode 100644
index 000000000000..97310bb727e2
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -0,0 +1,78 @@
+/*
+ * Hardkernel ODROID-XU device tree source
+ *
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * Based on exynos5410-smdk5410.dts:
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+/ {
+	model = "ODROID-XU based on EXYNOS5410";
+	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware@02037000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02037000 0x1000>;
+	};
+
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	cap-mmc-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <4>;
+	disable-wp;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
2.1.2

[PATCH v2 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Andreas Färber]

From: Hakjoo Kim <ruppi.kim@hardkernel.com>

Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
support for all platforms based on EXYNOS5410.

Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
[AF: Rebased onto Exynos5260]
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1 -> v2:
* Filled in Sob from Hakjoo Kim
* Rebased (.svc, .{g,w}eint_{con,mask,pend} fields dropped)

 .../bindings/pinctrl/samsung-pinctrl.txt           |   1 +
 drivers/pinctrl/samsung/pinctrl-exynos.c           | 126 +++++++++++++++++++++
 drivers/pinctrl/samsung/pinctrl-samsung.c          |   2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h          |   1 +
 4 files changed, 130 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index e82aaf492517..b87a176e730e 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -17,6 +17,7 @@ Required Properties:
   - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
   - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
   - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
+  - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
   - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d7154ed0b0eb..ef0e2a0d26eb 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -1084,6 +1084,132 @@ struct samsung_pin_ctrl exynos5260_pin_ctrl[] = {
 	},
 };
 
+/* pin banks of exynos5410 pin-controller 0 */
+static struct samsung_pin_bank exynos5410_pin_banks0[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
+	EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20),
+	EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24),
+	EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28),
+	EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"),
+	EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30),
+	EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34),
+	EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf0", 0x38),
+	EXYNOS_PIN_BANK_EINTG(8, 0x200, "gpf1", 0x3c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x220, "gpg0", 0x40),
+	EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpg1", 0x44),
+	EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48),
+	EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50),
+	EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"),
+	EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"),
+	EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"),
+	EXYNOS_PIN_BANK_EINTN(6, 0x320, "gpy2"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x340, "gpy3"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x360, "gpy4"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x380, "gpy5"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x3A0, "gpy6"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x3C0, "gpy7"),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
+};
+
+/* pin banks of exynos5410 pin-controller 1 */
+static struct samsung_pin_bank exynos5410_pin_banks1[] = {
+	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpj0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpj1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpj2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpj3", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpj4", 0x10),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpk0", 0x14),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpk1", 0x18),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0E0, "gpk2", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(7, 0x100, "gpk3", 0x20),
+};
+
+/* pin banks of exynos5410 pin-controller 2 */
+static struct samsung_pin_bank exynos5410_pin_banks2[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
+};
+
+/* pin banks of exynos5410 pin-controller 3 */
+static struct samsung_pin_bank exynos5410_pin_banks3[] = {
+	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos5410 SoC. Exynos5410 SoC includes
+ * four gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos5410_pin_ctrl[] = {
+	{
+		/* pin-controller instance 0 data */
+		.pin_banks	= exynos5410_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks0),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.weint_con	= EXYNOS_WKUP_ECON_OFFSET,
+		.weint_mask	= EXYNOS_WKUP_EMASK_OFFSET,
+		.weint_pend	= EXYNOS_WKUP_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl0",
+	}, {
+		/* pin-controller instance 1 data */
+		.pin_banks	= exynos5410_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks1),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl1",
+	}, {
+		/* pin-controller instance 2 data */
+		.pin_banks	= exynos5410_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks2),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl2",
+	}, {
+		/* pin-controller instance 3 data */
+		.pin_banks	= exynos5410_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks3),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl3",
+	},
+};
+
 /* pin banks of exynos5420 pin-controller 0 */
 static struct samsung_pin_bank exynos5420_pin_banks0[] = {
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00),
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 2d37c8f49f3c..42de732c542f 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1222,6 +1222,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 		.data = (void *)exynos5250_pin_ctrl },
 	{ .compatible = "samsung,exynos5260-pinctrl",
 		.data = (void *)exynos5260_pin_ctrl },
+	{ .compatible = "samsung,exynos5410-pinctrl",
+		.data = (void *)exynos5410_pin_ctrl },
 	{ .compatible = "samsung,exynos5420-pinctrl",
 		.data = (void *)exynos5420_pin_ctrl },
 	{ .compatible = "samsung,s5pv210-pinctrl",
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 5cedc9d26390..d19bbf4c7f24 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -241,6 +241,7 @@ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5260_pin_ctrl[];
+extern struct samsung_pin_ctrl exynos5410_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5420_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c2412_pin_ctrl[];
-- 
2.1.2

Re: [PATCH v2 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Andreas Färber]

Am 22.11.2014 um 21:26 schrieb Andreas Färber:
> From: Hakjoo Kim <ruppi.kim@hardkernel.com>
> 
> Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
> support for all platforms based on EXYNOS5410.
> 
> Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
> [AF: Rebased onto Exynos5260]
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v1 -> v2:
> * Filled in Sob from Hakjoo Kim
> * Rebased (.svc, .{g,w}eint_{con,mask,pend} fields dropped)

Ugh, this patch is actually missing exactly this change! Stay tuned...

Andreas

-- 
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 21284 AG Nürnberg

[PATCH v3 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Andreas Färber]

From: Hakjoo Kim <ruppi.kim@hardkernel.com>

Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
support for all platforms based on EXYNOS5410.

Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
[AF: Rebased onto Exynos5260 and irq_chip consolidation]
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 v2 -> v3:
 * Rebased (.svc, .{g,w}eint_{con,mask,pend} fields dropped)
 
 v1 -> v2:
 * Filled in Sob from Hakjoo Kim
 
 .../bindings/pinctrl/samsung-pinctrl.txt           |   1 +
 drivers/pinctrl/samsung/pinctrl-exynos.c           | 107 +++++++++++++++++++++
 drivers/pinctrl/samsung/pinctrl-samsung.c          |   2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h          |   1 +
 4 files changed, 111 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index e82aaf492517..b87a176e730e 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -17,6 +17,7 @@ Required Properties:
   - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
   - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
   - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
+  - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
   - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d7154ed0b0eb..0580399a6587 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -1084,6 +1084,113 @@ struct samsung_pin_ctrl exynos5260_pin_ctrl[] = {
 	},
 };
 
+/* pin banks of exynos5410 pin-controller 0 */
+static struct samsung_pin_bank exynos5410_pin_banks0[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
+	EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20),
+	EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24),
+	EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28),
+	EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"),
+	EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30),
+	EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34),
+	EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf0", 0x38),
+	EXYNOS_PIN_BANK_EINTG(8, 0x200, "gpf1", 0x3c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x220, "gpg0", 0x40),
+	EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpg1", 0x44),
+	EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48),
+	EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50),
+	EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"),
+	EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"),
+	EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"),
+	EXYNOS_PIN_BANK_EINTN(6, 0x320, "gpy2"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x340, "gpy3"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x360, "gpy4"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x380, "gpy5"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x3A0, "gpy6"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x3C0, "gpy7"),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
+};
+
+/* pin banks of exynos5410 pin-controller 1 */
+static struct samsung_pin_bank exynos5410_pin_banks1[] = {
+	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpj0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpj1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpj2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpj3", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpj4", 0x10),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpk0", 0x14),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpk1", 0x18),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0E0, "gpk2", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(7, 0x100, "gpk3", 0x20),
+};
+
+/* pin banks of exynos5410 pin-controller 2 */
+static struct samsung_pin_bank exynos5410_pin_banks2[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
+};
+
+/* pin banks of exynos5410 pin-controller 3 */
+static struct samsung_pin_bank exynos5410_pin_banks3[] = {
+	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos5410 SoC. Exynos5410 SoC includes
+ * four gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos5410_pin_ctrl[] = {
+	{
+		/* pin-controller instance 0 data */
+		.pin_banks	= exynos5410_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks0),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl0",
+	}, {
+		/* pin-controller instance 1 data */
+		.pin_banks	= exynos5410_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks1),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl1",
+	}, {
+		/* pin-controller instance 2 data */
+		.pin_banks	= exynos5410_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks2),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl2",
+	}, {
+		/* pin-controller instance 3 data */
+		.pin_banks	= exynos5410_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks3),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl3",
+	},
+};
+
 /* pin banks of exynos5420 pin-controller 0 */
 static struct samsung_pin_bank exynos5420_pin_banks0[] = {
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00),
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 2d37c8f49f3c..42de732c542f 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1222,6 +1222,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 		.data = (void *)exynos5250_pin_ctrl },
 	{ .compatible = "samsung,exynos5260-pinctrl",
 		.data = (void *)exynos5260_pin_ctrl },
+	{ .compatible = "samsung,exynos5410-pinctrl",
+		.data = (void *)exynos5410_pin_ctrl },
 	{ .compatible = "samsung,exynos5420-pinctrl",
 		.data = (void *)exynos5420_pin_ctrl },
 	{ .compatible = "samsung,s5pv210-pinctrl",
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 5cedc9d26390..d19bbf4c7f24 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -241,6 +241,7 @@ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5260_pin_ctrl[];
+extern struct samsung_pin_ctrl exynos5410_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5420_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c2412_pin_ctrl[];
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Linus Walleij]

On Sat, Nov 22, 2014 at 11:26 PM, Andreas Färber <afaerber@suse.de> wrote:

> From: Hakjoo Kim <ruppi.kim@hardkernel.com>
>
> Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
> support for all platforms based on EXYNOS5410.
>
> Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
> [AF: Rebased onto Exynos5260 and irq_chip consolidation]
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
>  v2 -> v3:
>  * Rebased (.svc, .{g,w}eint_{con,mask,pend} fields dropped)
>
>  v1 -> v2:
>  * Filled in Sob from Hakjoo Kim

Is this based on the pinctrl devel branch so I can apply it?

I'd like Tomasz ACK on it first though.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Andreas Färber]

Am 28.11.2014 um 12:59 schrieb Linus Walleij:
> On Sat, Nov 22, 2014 at 11:26 PM, Andreas Färber <afaerber@suse.de> wrote:
> 
>> From: Hakjoo Kim <ruppi.kim@hardkernel.com>
>>
>> Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
>> support for all platforms based on EXYNOS5410.
>>
>> Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
>> [AF: Rebased onto Exynos5260 and irq_chip consolidation]
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>>  v2 -> v3:
>>  * Rebased (.svc, .{g,w}eint_{con,mask,pend} fields dropped)
>>
>>  v1 -> v2:
>>  * Filled in Sob from Hakjoo Kim
> 
> Is this based on the pinctrl devel branch so I can apply it?

It was based on the Samsung for-next tree. I can rebase if needed.

> I'd like Tomasz ACK on it first though.

Thanks,
Andreas

-- 
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 21284 AG Nürnberg

Re: [PATCH v3 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Tomasz Figa]

Hi Andreas,

2014-11-28 21:07 GMT+09:00 Andreas Färber <afaerber@suse.de>:
> Am 28.11.2014 um 12:59 schrieb Linus Walleij:
>> On Sat, Nov 22, 2014 at 11:26 PM, Andreas Färber <afaerber@suse.de> wrote:
>>
>>> From: Hakjoo Kim <ruppi.kim@hardkernel.com>
>>>
>>> Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
>>> support for all platforms based on EXYNOS5410.
>>>
>>> Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
>>> [AF: Rebased onto Exynos5260 and irq_chip consolidation]
>>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>>> ---
>>>  v2 -> v3:
>>>  * Rebased (.svc, .{g,w}eint_{con,mask,pend} fields dropped)
>>>
>>>  v1 -> v2:
>>>  * Filled in Sob from Hakjoo Kim
>>
>> Is this based on the pinctrl devel branch so I can apply it?
>
> It was based on the Samsung for-next tree. I can rebase if needed.

Yes, please rebase (and please make sure that all the structs are
const, which became possible after recent changes). Otherwise the
patch looks good.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Tomasz Figa]

Hi Andreas,

On 23.11.2014 07:26, Andreas Färber wrote:
> From: Hakjoo Kim <ruppi.kim@hardkernel.com>
>
> Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
> support for all platforms based on EXYNOS5410.
>
> Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
> [AF: Rebased onto Exynos5260 and irq_chip consolidation]
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
>   v2 -> v3:
>   * Rebased (.svc, .{g,w}eint_{con,mask,pend} fields dropped)
>
>   v1 -> v2:
>   * Filled in Sob from Hakjoo Kim

Any news on this patch? I'd like to ACK it, but apparently it is waiting 
for a rebase.

Sorry for the delay, unfortunately things are a little bit busy on my 
side nowadays.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 4/5] ARM: dts: add pinctrl support to Exynos5410

[Andreas Färber]

From: Hakjoo Kim <ruppi.kim@hardkernel.com>

Add the required pin configuration support to Exynos5410 using pinctrl
interface.

Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
[AF: Rebased, style changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1 -> v2:
* Filled in Sob from Hakjoo Kim

 arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 406 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5410.dtsi         |  30 +++
 2 files changed, 436 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5410-pinctrl.dtsi

diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
new file mode 100644
index 000000000000..f9aa6bb55464
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -0,0 +1,406 @@
+/*
+ * Exynos5410 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Hardkernel Co., Ltd.
+ *              http://www.hardkernel.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm5: gpm5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm7: gpm7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy7: gpy7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>,
+		             <24 0>,
+		             <25 0>,
+		             <25 1>,
+		             <26 0>,
+		             <26 1>,
+		             <27 0>,
+		             <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>,
+		             <28 1>,
+		             <29 0>,
+		             <29 1>,
+		             <30 0>,
+		             <30 1>,
+		             <31 0>,
+		             <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_1 {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 731eefd23fa9..467b23328074 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -21,6 +21,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -218,4 +222,30 @@
 			status = "disabled";
 		};
 	};
+
+	pinctrl_0: pinctrl@13400000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x13400000 0x1000>;
+		interrupts = <0 45 0>;
+	};
+
+	pinctrl_1: pinctrl@14000000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x14000000 0x1000>;
+		interrupts = <0 46 0>;
+	};
+
+	pinctrl_2: pinctrl@10d10000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x10d10000 0x1000>;
+		interrupts = <0 50 0>;
+	};
+
+	pinctrl_3: pinctrl@03860000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupts = <0 47 0>;
+	};
 };
+
+#include "exynos5410-pinctrl.dtsi"
-- 
2.1.2

Re: [PATCH v2 4/5] ARM: dts: add pinctrl support to Exynos5410

[Andreas Färber]

Am 22.11.2014 um 21:26 schrieb Andreas Färber:
> From: Hakjoo Kim <ruppi.kim-vC+yAUbXFBlQ0OI7PeSoCw@public.gmane.org>
> 
> Add the required pin configuration support to Exynos5410 using pinctrl
> interface.
> 
> Signed-off-by: Hakjoo Kim <ruppi.kim-vC+yAUbXFBlQ0OI7PeSoCw@public.gmane.org>
> [AF: Rebased, style changes]
> Signed-off-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
> ---
> v1 -> v2:
> * Filled in Sob from Hakjoo Kim

Missed one review comment from the RFC, v3 coming up.

Andreas

-- 
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 21284 AG Nürnberg
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 4/5] ARM: dts: add pinctrl support to Exynos5410

[Andreas Färber]

From: Hakjoo Kim <ruppi.kim@hardkernel.com>

Add the required pin configuration support to Exynos5410 using pinctrl
interface.

Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
[AF: Rebased, style changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 v2 -> v3:
 * Added wake-up IRQ controller node (Tomasz Figa)
 
 v1 -> v2:
 * Filled in Sob from Hakjoo Kim
 
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 406 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5410.dtsi         |  36 +++
 2 files changed, 442 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5410-pinctrl.dtsi

diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
new file mode 100644
index 000000000000..f9aa6bb55464
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -0,0 +1,406 @@
+/*
+ * Exynos5410 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Hardkernel Co., Ltd.
+ *              http://www.hardkernel.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm5: gpm5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm7: gpm7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy7: gpy7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>,
+		             <24 0>,
+		             <25 0>,
+		             <25 1>,
+		             <26 0>,
+		             <26 1>,
+		             <27 0>,
+		             <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>,
+		             <28 1>,
+		             <29 0>,
+		             <29 1>,
+		             <30 0>,
+		             <30 1>,
+		             <31 0>,
+		             <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_1 {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 731eefd23fa9..460335606466 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -21,6 +21,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -218,4 +222,36 @@
 			status = "disabled";
 		};
 	};
+
+	pinctrl_0: pinctrl@13400000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x13400000 0x1000>;
+		interrupts = <0 45 0>;
+
+		wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_1: pinctrl@14000000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x14000000 0x1000>;
+		interrupts = <0 46 0>;
+	};
+
+	pinctrl_2: pinctrl@10d10000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x10d10000 0x1000>;
+		interrupts = <0 50 0>;
+	};
+
+	pinctrl_3: pinctrl@03860000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupts = <0 47 0>;
+	};
 };
+
+#include "exynos5410-pinctrl.dtsi"
-- 
2.1.2

[PATCH v2 5/5] ARM: dts: exynos5410: Add ODROID-XU LEDs

[Andreas Färber]

Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1 -> v2:
* Filled in Sob from Hakjoo Kim

 arch/arm/boot/dts/exynos5410-odroidxu.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 97310bb727e2..b02cd3ab7b38 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -15,6 +15,7 @@
 
 /dts-v1/;
 #include "exynos5410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	model = "ODROID-XU based on EXYNOS5410";
 	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
@@ -39,6 +40,30 @@
 		reg = <0x02037000 0x1000>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "blue:heartbeat";
+			gpios = <&gpb2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		green {
+			label = "green:activity";
+			gpios = <&gpb2 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		red {
+			label = "red:activity";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
 };
 
 &mmc_0 {
-- 
2.1.2

Re: [PATCH v2 5/5] ARM: dts: exynos5410: Add ODROID-XU LEDs

[Andreas Färber]

Hello Hakjoo,

Am 22.11.2014 um 21:26 schrieb Andreas Färber:
> Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>

Sorry, I was too quick here: Only the previous two patches got signed
off by you, plus the last one on your 3.14 branch. Are you able to sign
off all patches authored by you there? (An email reply indicating the
Signed-off-by should do, if updating the branch is too much work.)

Thanks,
Andreas

> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v1 -> v2:
> * Filled in Sob from Hakjoo Kim
> 
>  arch/arm/boot/dts/exynos5410-odroidxu.dts | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> index 97310bb727e2..b02cd3ab7b38 100644
> --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
> +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> @@ -15,6 +15,7 @@
>  
>  /dts-v1/;
>  #include "exynos5410.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>  / {
>  	model = "ODROID-XU based on EXYNOS5410";
>  	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
> @@ -39,6 +40,30 @@
>  		reg = <0x02037000 0x1000>;
>  	};
>  
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		blue {
> +			label = "blue:heartbeat";
> +			gpios = <&gpb2 2 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +			linux,default-trigger = "heartbeat";
> +		};
> +
> +		green {
> +			label = "green:activity";
> +			gpios = <&gpb2 1 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +			linux,default-trigger = "mmc0";
> +		};
> +
> +		red {
> +			label = "red:activity";
> +			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +			linux,default-trigger = "mmc1";
> +		};
> +	};
>  };
>  
>  &mmc_0 {
> 


-- 
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 21284 AG Nürnberg