[PATCH v3 0/5]

[PATCH v3 0/5]

[Yunzhi Li]

Patches to add support for Rockchip usb phys.Add a new Rockchip
usb phy driver and modify dwc2 controller driver to make dwc2
platform devices support a generic PHY framework driver. This
patch set has been tested on my rk3288-evb and power off the usb
phys would reduce about 60mW power budget in total during sustem
suspend.

Changes in v3:
- Use BIT macro instead of bit shift ops.
- Rename the config entry to PHY_ROCKCHIP_USB.
- Fix coding style: both branches of the if() which only one
  branch of the conditional statement is a single statement should
  have braces.
- No need to test dwc2->phy for NULL before calling generic phy
  APIs.
- Add more context about the changes in the long description.

Yunzhi Li (5):
  phy: add a driver for the Rockchip SoC internal USB2.0 PHY
  Documentation: bindings: add doc for the Rockchip usb PHY
  usb: dwc2: add generic PHY framework support for dwc2 usb    
    controler platform driver.
  ARM: dts: add rk3288 usb PHY
  ARM: dts: Enable usb PHY on rk3288-evb board

 .../devicetree/bindings/phy/rockchip-usb-phy.txt   |  22 +++
 arch/arm/boot/dts/rk3288-evb.dtsi                  |   4 +
 arch/arm/boot/dts/rk3288.dtsi                      |  13 ++
 drivers/phy/Kconfig                                |   7 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-rockchip-usb.c                     | 179 +++++++++++++++++++++
 drivers/usb/dwc2/gadget.c                          |  33 ++--
 drivers/usb/dwc2/platform.c                        |  36 ++++-
 8 files changed, 272 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
 create mode 100644 drivers/phy/phy-rockchip-usb.c

-- 
2.0.0

[PATCH v3 1/5] phy: add a driver for the Rockchip SoC internal USB2.0 PHY

[Yunzhi Li]

This patche to add a generic PHY driver for ROCKCHIP usb PHYs,
currently this driver can support RK3288. The RK3288 SoC have
three independent USB PHY IPs which are all configured through a
set of registers located in the GRF (general register files)
module.

Signed-off-by: Yunzhi Li <lyz@rock-chips.com>

---

Changes in v3:
- Use BIT macro instead of bit shift ops.
- Rename the config entry to PHY_ROCKCHIP_USB.

 drivers/phy/Kconfig            |   7 ++
 drivers/phy/Makefile           |   1 +
 drivers/phy/phy-rockchip-usb.c | 179 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 187 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-usb.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index ccad880..8a39d2a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -239,6 +239,13 @@ config PHY_QCOM_IPQ806X_SATA
 	depends on OF
 	select GENERIC_PHY
 
+config PHY_ROCKCHIP_USB2
+	tristate "Rockchip USB2 PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip USB 2.0 PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index aa74f96..8a13f72 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -28,6 +28,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_ROCKCHIP_USB2) += phy-rockchip-usb.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
new file mode 100644
index 0000000..98af043
--- /dev/null
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -0,0 +1,179 @@
+/*
+ * Rockchip usb PHY driver
+ *
+ * Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com>
+ * Copyright (C) 2014 ROCKCHIP, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define ROCKCHIP_RK3288_UOC(n)	(0x320 + n * 0x14)
+
+#define SIDDQ_MSK		BIT(13 + 16)
+#define SIDDQ_ON		BIT(13)
+#define SIDDQ_OFF		(0 << 13)
+
+enum rk3288_phy_id {
+	RK3288_OTG,
+	RK3288_HOST0,
+	RK3288_HOST1,
+	RK3288_NUM_PHYS,
+};
+
+struct rockchip_usb_phy {
+	struct regmap *reg_base;
+	unsigned int reg_offset;
+	struct clk *clk;
+	struct phy *phy;
+};
+
+static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
+					   bool siddq)
+{
+	return regmap_write(phy->reg_base, phy->reg_offset,
+			    SIDDQ_MSK | (siddq ? SIDDQ_ON : SIDDQ_OFF));
+}
+
+static int rockchip_usb_phy_power_off(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+	int ret = 0;
+
+	/* Power down usb phy analog blocks by set siddq 1*/
+	ret = rockchip_usb_phy_power(phy, 1);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(phy->clk);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rockchip_usb_phy_power_on(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+	int ret = 0;
+
+	ret = clk_prepare_enable(phy->clk);
+	if (ret)
+		return ret;
+
+	/* Power up usb phy analog blocks by set siddq 0*/
+	ret = rockchip_usb_phy_power(phy, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static struct phy *rockchip_usb_phy_xlate(struct device *dev,
+					struct of_phandle_args *args)
+{
+	struct rockchip_usb_phy *phy_array = dev_get_drvdata(dev);
+
+	if (WARN_ON(args->args[0] == 0 || args->args[0] >= RK3288_NUM_PHYS))
+		return ERR_PTR(-ENODEV);
+
+	return (phy_array + args->args[0])->phy;
+}
+
+static struct phy_ops ops = {
+	.power_on	= rockchip_usb_phy_power_on,
+	.power_off	= rockchip_usb_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int rockchip_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_usb_phy *rk_phy;
+	struct rockchip_usb_phy *phy_array;
+	struct phy_provider *phy_provider;
+	struct regmap *grf;
+	char clk_name[16];
+	int i;
+
+	grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+	if (IS_ERR(grf)) {
+		dev_err(&pdev->dev, "Missing rockchip,grf property\n");
+		return PTR_ERR(grf);
+	}
+
+	phy_array = devm_kzalloc(dev, RK3288_NUM_PHYS * sizeof(*rk_phy),
+				 GFP_KERNEL);
+	if (!phy_array)
+		return -ENOMEM;
+
+	for (i = 0; i < RK3288_NUM_PHYS; i++) {
+		rk_phy = &phy_array[i];
+
+		rk_phy->reg_base = grf;
+
+		rk_phy->reg_offset = ROCKCHIP_RK3288_UOC(i);
+
+		snprintf(clk_name, sizeof(clk_name), "usbphy%d", i);
+		rk_phy->clk = devm_clk_get(dev, clk_name);
+		if (IS_ERR(rk_phy->clk)) {
+			dev_warn(dev, "failed to get clock %s\n", clk_name);
+			rk_phy->clk = NULL;
+		}
+
+		rk_phy->phy = devm_phy_create(dev, NULL, &ops);
+		if (IS_ERR(rk_phy->phy)) {
+			dev_err(dev, "failed to create PHY %d\n", i);
+			return PTR_ERR(rk_phy->phy);
+		}
+		phy_set_drvdata(rk_phy->phy, rk_phy);
+	}
+
+	platform_set_drvdata(pdev, phy_array);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+						     rockchip_usb_phy_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3288-usb-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids);
+
+static struct platform_driver rockchip_usb_driver = {
+	.probe		= rockchip_usb_phy_probe,
+	.driver		= {
+		.name	= "rockchip-usb-phy",
+		.owner	= THIS_MODULE,
+		.of_match_table = rockchip_usb_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_usb_driver);
+
+MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
2.0.0

[PATCH v3 2/5] Documentation: bindings: add doc for the Rockchip usb PHY

[Yunzhi Li]

Document the bindings of the Rockchip usb PHY driver.

Signed-off-by: Yunzhi Li <lyz-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---

Changes in v3: None

 .../devicetree/bindings/phy/rockchip-usb-phy.txt   | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
new file mode 100644
index 0000000..4574696
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -0,0 +1,22 @@
+ROCKCHIP USB2 PHY
+
+Required properties:
+ - compatible: rockchip,rk3288-usb-phy
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files"
+ - #phy-cells: must be 1
+
+Optional Properties:
+ - clocks : phandle + clock specifier for the phy clocks
+ - clock-names :
+		"usbphy0" - PHY clock for OTG controller
+		"usbphy1" - PHY clock for HOST0 controller
+		"usbphy2" - PHY clock for HOST1 controller
+
+Example:
+
+usbphy: phy {
+	#phy-cells = <1>;
+	compatible = "rockchip,rk3288-usb-phy";
+	rockchip,grf = <&grf>;
+};
-- 
2.0.0


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 4/5] ARM: dts: add rk3288 usb PHY

[Yunzhi Li]

This patch adds a device_node for RK3288 SoC usb phy. It also
defines the phy to be used by three usb controllers: usb_host0/1
and usb_otg.

Signed-off-by: Yunzhi Li <lyz@rock-chips.com>

---

Changes in v3:
- Add more context about the changes in the long description.

 arch/arm/boot/dts/rk3288.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 874e66d..a663c4c 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -329,12 +329,21 @@
 		status = "disabled";
 	};
 
+	usbphy: phy {
+		#phy-cells = <1>;
+		compatible = "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
 	usb_host0_ehci: usb@ff500000 {
 		compatible = "generic-ehci";
 		reg = <0xff500000 0x100>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_USBHOST0>;
 		clock-names = "usbhost";
+		phys = <&usbphy 1>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
@@ -347,6 +356,8 @@
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_USBHOST1>;
 		clock-names = "otg";
+		phys = <&usbphy 2>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -357,6 +368,8 @@
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG0>;
 		clock-names = "otg";
+		phys = <&usbphy 0>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
-- 
2.0.0

Re: [PATCH v3 1/5] phy: add a driver for the Rockchip SoC internal USB2.0 PHY

[Kishon Vijay Abraham I]

Hi,

On Monday 08 December 2014 03:16 PM, Yunzhi Li wrote:
> This patche to add a generic PHY driver for ROCKCHIP usb PHYs,

%s/patche/patch
> currently this driver can support RK3288. The RK3288 SoC have
> three independent USB PHY IPs which are all configured through a
> set of registers located in the GRF (general register files)
> module.
> 
> Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
> 
> ---
> 
> Changes in v3:
> - Use BIT macro instead of bit shift ops.
> - Rename the config entry to PHY_ROCKCHIP_USB.
> 
>  drivers/phy/Kconfig            |   7 ++
>  drivers/phy/Makefile           |   1 +
>  drivers/phy/phy-rockchip-usb.c | 179 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 187 insertions(+)
>  create mode 100644 drivers/phy/phy-rockchip-usb.c
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index ccad880..8a39d2a 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -239,6 +239,13 @@ config PHY_QCOM_IPQ806X_SATA
>  	depends on OF
>  	select GENERIC_PHY
>  
> +config PHY_ROCKCHIP_USB2
> +	tristate "Rockchip USB2 PHY Driver"
> +	depends on ARCH_ROCKCHIP && OF
> +	select GENERIC_PHY
> +	help
> +	  Enable this to support the Rockchip USB 2.0 PHY.
> +
>  config PHY_ST_SPEAR1310_MIPHY
>  	tristate "ST SPEAR1310-MIPHY driver"
>  	select GENERIC_PHY
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index aa74f96..8a13f72 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -28,6 +28,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
>  phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
>  obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
>  obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
> +obj-$(CONFIG_PHY_ROCKCHIP_USB2) += phy-rockchip-usb.o
>  obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
>  obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
>  obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
> diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
> new file mode 100644
> index 0000000..98af043
> --- /dev/null
> +++ b/drivers/phy/phy-rockchip-usb.c
> @@ -0,0 +1,179 @@
> +/*
> + * Rockchip usb PHY driver
> + *
> + * Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com>
> + * Copyright (C) 2014 ROCKCHIP, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +
> +#define ROCKCHIP_RK3288_UOC(n)	(0x320 + n * 0x14)
> +
> +#define SIDDQ_MSK		BIT(13 + 16)

This doesn't look correct. Won't this mask bit no:29?
> +#define SIDDQ_ON		BIT(13)
> +#define SIDDQ_OFF		(0 << 13)
> +
> +enum rk3288_phy_id {

rockchip_usb_phy_id?
> +	RK3288_OTG,
> +	RK3288_HOST0,
> +	RK3288_HOST1,
> +	RK3288_NUM_PHYS,
> +};
> +
> +struct rockchip_usb_phy {
> +	struct regmap *reg_base;
> +	unsigned int reg_offset;
> +	struct clk *clk;
> +	struct phy *phy;
> +};
> +
> +static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
> +					   bool siddq)
> +{
> +	return regmap_write(phy->reg_base, phy->reg_offset,
> +			    SIDDQ_MSK | (siddq ? SIDDQ_ON : SIDDQ_OFF));
> +}
> +
> +static int rockchip_usb_phy_power_off(struct phy *_phy)
> +{
> +	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
> +	int ret = 0;
> +
> +	/* Power down usb phy analog blocks by set siddq 1*/
> +	ret = rockchip_usb_phy_power(phy, 1);
> +	if (ret)
> +		return ret;
> +
> +	clk_disable_unprepare(phy->clk);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int rockchip_usb_phy_power_on(struct phy *_phy)
> +{
> +	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
> +	int ret = 0;
> +
> +	ret = clk_prepare_enable(phy->clk);
> +	if (ret)
> +		return ret;
> +
> +	/* Power up usb phy analog blocks by set siddq 0*/
> +	ret = rockchip_usb_phy_power(phy, 0);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static struct phy *rockchip_usb_phy_xlate(struct device *dev,
> +					struct of_phandle_args *args)
> +{
> +	struct rockchip_usb_phy *phy_array = dev_get_drvdata(dev);
> +
> +	if (WARN_ON(args->args[0] == 0 || args->args[0] >= RK3288_NUM_PHYS))
> +		return ERR_PTR(-ENODEV);
> +
> +	return (phy_array + args->args[0])->phy;
> +}
> +
> +static struct phy_ops ops = {
> +	.power_on	= rockchip_usb_phy_power_on,
> +	.power_off	= rockchip_usb_phy_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int rockchip_usb_phy_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_usb_phy *rk_phy;
> +	struct rockchip_usb_phy *phy_array;
> +	struct phy_provider *phy_provider;
> +	struct regmap *grf;
> +	char clk_name[16];
> +	int i;
> +
> +	grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
> +	if (IS_ERR(grf)) {
> +		dev_err(&pdev->dev, "Missing rockchip,grf property\n");
> +		return PTR_ERR(grf);
> +	}
> +
> +	phy_array = devm_kzalloc(dev, RK3288_NUM_PHYS * sizeof(*rk_phy),
> +				 GFP_KERNEL);
> +	if (!phy_array)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < RK3288_NUM_PHYS; i++) {

Don't hardcode NUM_PHYS. All this has to come from dt. Model each PHYs as
subnode of the phy provider node and use it here.

Thanks
Kishon

Re: [PATCH v3 1/5] phy: add a driver for the Rockchip SoC internal USB2.0 PHY

[Yunzhi Li]

Hi Kishon :

On 2014/12/8 17:57, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Monday 08 December 2014 03:16 PM, Yunzhi Li wrote:
>> This patche to add a generic PHY driver for ROCKCHIP usb PHYs,
> %s/patche/patch
Sorry for this typo.
>> +#include <linux/reset.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>> +
>> +#define ROCKCHIP_RK3288_UOC(n)	(0x320 + n * 0x14)
>> +
>> +#define SIDDQ_MSK		BIT(13 + 16)
> This doesn't look correct. Won't this mask bit no:29?
The higher 16-bit of this register is used for write-protect, only if 
BIT(13 + 16)
set to 1 the BIT(13) can be written. I will add some comments here in 
the next
version, to prevent others confused. ok ?

>> [...]
>>
>> +static int rockchip_usb_phy_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct rockchip_usb_phy *rk_phy;
>> +	struct rockchip_usb_phy *phy_array;
>> +	struct phy_provider *phy_provider;
>> +	struct regmap *grf;
>> +	char clk_name[16];
>> +	int i;
>> +
>> +	grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
>> +	if (IS_ERR(grf)) {
>> +		dev_err(&pdev->dev, "Missing rockchip,grf property\n");
>> +		return PTR_ERR(grf);
>> +	}
>> +
>> +	phy_array = devm_kzalloc(dev, RK3288_NUM_PHYS * sizeof(*rk_phy),
>> +				 GFP_KERNEL);
>> +	if (!phy_array)
>> +		return -ENOMEM;
>> +
>> +	for (i = 0; i < RK3288_NUM_PHYS; i++) {
> Don't hardcode NUM_PHYS. All this has to come from dt. Model each PHYs as
> subnode of the phy provider node and use it here.
I got it, it should be like this, model each PHYs as sub node and use 
of_get_child_count() to get the number of phys.