From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ray Jui Subject: Re: [PATCH v3 1/5] gpio: Cygnus: define Broadcom Cygnus GPIO binding Date: Mon, 8 Dec 2014 11:45:18 -0800 Message-ID: <5485FFCE.9000009@broadcom.com> References: <1418064468-8512-3-git-send-email-rjui@broadcom.com> <2129851.JzMQjVqeL2@wuerfel> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <2129851.JzMQjVqeL2@wuerfel> Sender: linux-kernel-owner@vger.kernel.org To: Arnd Bergmann Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Linus Walleij , Alexandre Courbot , Grant Likely , Christian Daudt , Matt Porter , Florian Fainelli , Russell King , Joe Perches , Scott Branden , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 12/8/2014 11:38 AM, Arnd Bergmann wrote: > On Monday 08 December 2014 10:47:44 Ray Jui wrote: >> + >> +- no-drv-stregnth: >> + Specifies the GPIO controller does not support drive strength configuration >> + >> > > Typo: > > strength, not stregnth > > Otherwise looks good. > > Arnd > Right...Let me fix that. Also noticed the following in the device tree binding example that needs to be fixed: gpio_crmu: gpio@03024800 { compatible = "brcm,cygnus-crmu-gpio"; The above line needs to be fixed with: compatible = "brcm,cygnus-gpio"; reg = <0x03024800 0x50>; ngpios = <6>; #gpio-cells = <2>; gpio-controller; no-drv-stregnth; };