From: David Paris <david.paris-qxv4g6HH51o@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org,
linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
Date: Mon, 15 Dec 2014 13:29:58 +0100 [thread overview]
Message-ID: <548ED446.8000908@st.com> (raw)
In-Reply-To: <1418642738-17407-7-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Hi Lee,
1. During resume stage the st_wdog_setup should be called again to
reconfigure LPC RTC as watchdog.
2. For Suspend/resume API, is CONFIG_PM necessary, CONFIG_PM_SLEEP
is enough as no PM_RUNTIME in this driver ! This will results in a
compilation warning if CONFIG_PM_SLEEP is unset for PM_RUNTIME not.
David
On 12/15/2014 12:25 PM, Lee Jones wrote:
> Signed-off-by: David Paris <david.paris-qxv4g6HH51o@public.gmane.org>
> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> drivers/watchdog/Kconfig | 13 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/st_wdt.c | 312 ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 326 insertions(+)
> create mode 100644 drivers/watchdog/st_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index f57312f..5a538af 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -432,6 +432,19 @@ config SIRFSOC_WATCHDOG
> Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
> the watchdog triggers the system will be reset.
>
> +config ST_WATCHDOG
> + tristate "STMicroelectronics LPC Watchdog"
> + depends on ARCH_STI
> + depends on OF
> + select WATCHDOG_CORE
> + select MFD_ST_LPC
> + help
> + Say Y here to include STMicroelectronics Low Power Controller
> + (LPC) based Watchdog timer support.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called st_wdt.
> +
> config TEGRA_WATCHDOG
> tristate "Tegra watchdog"
> depends on ARCH_TEGRA || COMPILE_TEST
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 468c320..eb19937 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
> obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
> obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
> obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
> +obj-$(CONFIG_ST_WATCHDOG) += st_wdt.o
> obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
> obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
>
> diff --git a/drivers/watchdog/st_wdt.c b/drivers/watchdog/st_wdt.c
> new file mode 100644
> index 0000000..7e06f15
> --- /dev/null
> +++ b/drivers/watchdog/st_wdt.c
> @@ -0,0 +1,312 @@
> +/*
> + * st-wdt.c - ST's LPC Watchdog
> + *
> + * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
> + *
> + * Author: David Paris <david.paris-qxv4g6HH51o@public.gmane.org> for STMicroelectronics
> + * Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> for STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public Licence
> + * as published by the Free Software Foundation; either version
> + * 2 of the Licence, or (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/watchdog.h>
> +
> +/* Low Power Alarm */
> +#define LPC_LPA_LSB_OFF 0x410
> +#define LPC_LPA_START_OFF 0x418
> +
> +/* LPC as WDT */
> +#define LPC_WDT_OFF 0x510
> +
> +struct st_wdog_syscfg {
> + struct regmap *regmap;
> + unsigned int reset_type_reg;
> + unsigned int reset_type_mask;
> + unsigned int enable_reg;
> + unsigned int enable_mask;
> +};
> +
> +struct st_wdog {
> + void __iomem *base;
> + struct device *dev;
> + struct st_wdog_syscfg *syscfg;
> + struct clk *clk;
> + int warm_reset;
> +};
> +
> +static struct st_wdog_syscfg stid127_syscfg = {
> + .reset_type_reg = 0x004,
> + .reset_type_mask = BIT(2),
> + .enable_reg = 0x000,
> + .enable_mask = BIT(2),
> +};
> +
> +static struct st_wdog_syscfg stih415_syscfg = {
> + .reset_type_reg = 0x0B8,
> + .reset_type_mask = BIT(6),
> + .enable_reg = 0x0B4,
> + .enable_mask = BIT(7),
> +};
> +
> +static struct st_wdog_syscfg stih416_syscfg = {
> + .reset_type_reg = 0x88C,
> + .reset_type_mask = BIT(6),
> + .enable_reg = 0x888,
> + .enable_mask = BIT(7),
> +};
> +
> +static struct st_wdog_syscfg stih407_syscfg = {
> + .enable_reg = 0x204,
> + .enable_mask = BIT(19),
> +};
> +
> +static struct of_device_id st_wdog_match[] = {
> + {
> + .compatible = "st,stih407-lpc",
> + .data = (void *)&stih407_syscfg,
> + },
> + {
> + .compatible = "st,stih416-lpc",
> + .data = (void *)&stih416_syscfg,
> + },
> + {
> + .compatible = "st,stih415-lpc",
> + .data = (void *)&stih415_syscfg,
> + },
> + {
> + .compatible = "st,stid127-lpc",
> + .data = (void *)&stid127_syscfg,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, st_wdog_match);
> +
> +static void st_wdog_setup(struct st_wdog *st_wdog, bool enable)
> +{
> + /* Type of watchdog reset - 0: Cold 1: Warm */
> + if (st_wdog->syscfg->reset_type_reg)
> + regmap_update_bits(st_wdog->syscfg->regmap,
> + st_wdog->syscfg->reset_type_reg,
> + st_wdog->syscfg->reset_type_mask,
> + st_wdog->warm_reset);
> +
> + /* Mask/unmask watchdog reset */
> + regmap_update_bits(st_wdog->syscfg->regmap,
> + st_wdog->syscfg->enable_reg,
> + st_wdog->syscfg->enable_mask,
> + enable ? 0 : st_wdog->syscfg->enable_mask);
> +}
> +
> +static void st_wdog_load_timer(struct st_wdog *st_wdog, unsigned int timeout)
> +{
> + unsigned long clkrate = clk_get_rate(st_wdog->clk);
> + unsigned int maxtimeout = 0xFFFFFFFF / clkrate;
> +
> + if (timeout > maxtimeout) {
> + dev_warn(st_wdog->dev,
> + "timer overrun detected at current freq (%luHz)\n"
> + "wdog timeout set for %ds instead of requested %uis",
> + clkrate, maxtimeout, timeout);
> + timeout = maxtimeout;
> + }
> + timeout *= clkrate;
> +
> + writel_relaxed(timeout, st_wdog->base + LPC_LPA_LSB_OFF);
> + writel_relaxed(1, st_wdog->base + LPC_LPA_START_OFF);
> +}
> +
> +static int st_wdog_start(struct watchdog_device *wdd)
> +{
> + struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> + writel_relaxed(1, st_wdog->base + LPC_WDT_OFF);
> +
> + return 0;
> +}
> +
> +static int st_wdog_stop(struct watchdog_device *wdd)
> +{
> + struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> + writel_relaxed(0, st_wdog->base + LPC_WDT_OFF);
> +
> + return 0;
> +}
> +
> +static int st_wdog_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> + wdd->timeout = timeout;
> + st_wdog_load_timer(st_wdog, timeout);
> +
> + return 0;
> +}
> +
> +static int st_wdog_keepalive(struct watchdog_device *wdd)
> +{
> + struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> + st_wdog_load_timer(st_wdog, wdd->timeout);
> +
> + return 0;
> +}
> +
> +static const struct watchdog_info st_wdog_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "ST LPC WDT",
> +};
> +
> +static const struct watchdog_ops st_wdog_ops = {
> + .owner = THIS_MODULE,
> + .start = st_wdog_start,
> + .stop = st_wdog_stop,
> + .ping = st_wdog_keepalive,
> + .set_timeout = st_wdog_set_timeout,
> +};
> +
> +static struct watchdog_device st_wdog_dev = {
> + .info = &st_wdog_info,
> + .ops = &st_wdog_ops,
> +};
> +
> +static int st_wdog_probe(struct platform_device *pdev)
> +{
> + const struct of_device_id *match;
> + struct device_node *np;
> + struct st_wdog *st_wdog;
> + struct regmap *regmap;
> + struct resource *res;
> + struct clk *clk;
> + void __iomem *base;
> + int ret;
> +
> + /* This is a single node MFD device. */
> + np = pdev->dev.of_node = pdev->dev.parent->of_node;
> +
> + st_wdog = devm_kzalloc(&pdev->dev, sizeof(*st_wdog), GFP_KERNEL);
> + if (!st_wdog)
> + return -ENOMEM;
> +
> + match = of_match_device(st_wdog_match, &pdev->dev);
> + if (!match) {
> + dev_err(&pdev->dev, "Couldn't match device\n");
> + return -ENODEV;
> + }
> + st_wdog->syscfg = (struct st_wdog_syscfg *)match->data;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base)) {
> + dev_err(&pdev->dev, "Failed to ioremap base\n");
> + return PTR_ERR(base);
> + }
> +
> + regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
> + if (IS_ERR(regmap)) {
> + dev_err(&pdev->dev, "No syscfg phandle specified\n");
> + return PTR_ERR(regmap);
> + }
> +
> + clk = clk_get(&pdev->dev, NULL);
> + if (IS_ERR(clk)) {
> + dev_err(&pdev->dev, "Unable to request clock\n");
> + return PTR_ERR(clk);
> + }
> + clk_prepare_enable(st_wdog->clk);
> +
> + st_wdog->dev = &pdev->dev;
> + st_wdog->base = base;
> + st_wdog->clk = clk;
> + st_wdog->syscfg->regmap = regmap;
> + st_wdog->warm_reset = of_property_read_bool(np, "st,warm_reset");
> +
> + watchdog_set_drvdata(&st_wdog_dev, st_wdog);
> + watchdog_set_nowayout(&st_wdog_dev, WATCHDOG_NOWAYOUT);
> +
> + /* Init Watchdog timeout with value in DT */
> + ret = watchdog_init_timeout(&st_wdog_dev, 0, &pdev->dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Unable to initialise watchdog timeout\n");
> + return ret;
> + }
> +
> + ret = watchdog_register_device(&st_wdog_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Unable to register watchdog\n");
> + clk_disable_unprepare(clk);
> + return ret;
> + }
> +
> + st_wdog_setup(st_wdog, true);
> +
> + dev_info(&pdev->dev, "LPC Watchdog driver registered, reset type is %s",
> + st_wdog->warm_reset ? "warm" : "cold");
> +
> + return ret;
> +}
> +
> +static int st_wdog_remove(struct platform_device *pdev)
> +{
> + struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
> +
> + st_wdog_setup(st_wdog, false);
> + watchdog_unregister_device(&st_wdog_dev);
> + clk_disable_unprepare(st_wdog->clk);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int st_wdog_suspend(struct device *dev)
> +{
> + if (watchdog_active(&st_wdog_dev))
> + st_wdog_stop(&st_wdog_dev);
> +
> + return 0;
> +}
> +
> +static int st_wdog_resume(struct device *dev)
> +{
> + struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
> +
> + if (watchdog_active(&st_wdog_dev)) {
> + st_wdog_load_timer(st_wdog, st_wdog_dev.timeout);
> + st_wdog_start(&st_wdog_dev);
> + }
> +
> + return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(st_wdog_pm_ops,
> + st_wdog_suspend,
> + st_wdog_resume);
> +
> +static struct platform_driver st_wdog_driver = {
> + .driver = {
> + .name = "st-lpc-wdt",
> + .pm = &st_wdog_pm_ops,
> + },
> + .probe = st_wdog_probe,
> + .remove = st_wdog_remove,
> +};
> +module_platform_driver(st_wdog_driver);
> +
> +MODULE_AUTHOR("David Paris <david.paris-qxv4g6HH51o@public.gmane.org>");
> +MODULE_DESCRIPTION("ST LPC Watchdog Driver");
> +MODULE_LICENSE("GPL v2");
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-12-15 12:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-15 11:25 [PATCH 0/8] mfd: watchdog: rtc: New driver for ST's LPC IP Lee Jones
2014-12-15 11:25 ` [PATCH 3/8] mfd: bindings: Provide ST bindings for ST's LPC device Lee Jones
2014-12-15 11:25 ` [PATCH 4/8] mfd: dt-bindings: Provide human readable defines for LPC mode choosing Lee Jones
2014-12-15 11:25 ` [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog Lee Jones
[not found] ` <1418642738-17407-7-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-15 12:29 ` David Paris [this message]
2014-12-15 12:52 ` David Paris
2014-12-15 14:15 ` Guenter Roeck
2014-12-15 16:23 ` Guenter Roeck
[not found] ` <1418642738-17407-1-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-15 11:25 ` [PATCH 1/8] ARM: multi_v7_defconfig: Enable support " Lee Jones
2014-12-15 11:25 ` [PATCH 2/8] ARM: multi_v7_defconfig: Enable support for ST's LPC RTC Lee Jones
2014-12-15 11:25 ` [PATCH 5/8] mfd: Add ST's Low Power Controller driver Lee Jones
[not found] ` <1418642738-17407-6-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-15 13:38 ` Arnd Bergmann
2014-12-15 13:50 ` Lee Jones
2014-12-15 14:06 ` Arnd Bergmann
2014-12-15 14:38 ` Lee Jones
2014-12-15 11:25 ` [PATCH 7/8] rtc: st: add new driver for ST's LPC RTC Lee Jones
[not found] ` <1418642738-17407-8-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-15 12:28 ` [STLinux Kernel] " David Paris
2014-12-15 14:17 ` Guenter Roeck
2014-12-15 11:25 ` [PATCH 8/8] ARM: STi: DT: STiH407: Add Device Tree node for the LPC Lee Jones
-- strict thread matches above, loose matches on Subject: below --
2014-12-17 16:45 [PATCH v2 0/8] watchdog: rtc: New driver(s) for ST's LPC IP Lee Jones
[not found] ` <1418834727-1602-1-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-17 16:45 ` [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog Lee Jones
2014-12-17 18:02 ` Guenter Roeck
[not found] ` <20141217180251.GA29914-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2014-12-18 8:26 ` Lee Jones
2014-12-18 16:00 ` Guenter Roeck
[not found] ` <20141218160014.GA16015-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2014-12-18 17:20 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=548ED446.8000908@st.com \
--to=david.paris-qxv4g6hh51o@public.gmane.org \
--cc=a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).