From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH 3/3] ARM: dts: sun8i: Add dts file for Ippo Q8H v1.2 tablets
Date: Mon, 12 Jan 2015 13:16:06 +0100 [thread overview]
Message-ID: <54B3BB06.1040306@redhat.com> (raw)
In-Reply-To: <20150112112429.GI4891@lukather>
Hi,
On 12-01-15 12:24, Maxime Ripard wrote:
> Hi,
>
> On Wed, Jan 07, 2015 at 09:16:15PM +0100, Hans de Goede wrote:
>> The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
>> dtb file since some gpio-s surrounding the wlan/bluetooth are different,
>> it uses different camera sensors, and different DRAM timings.
>>
>> Note that atm neither the wlan/bluetooth nor the camera are supported, so
>> atm their is no difference between the dts files, but because of the different
>> DRAM timings there are already separate u-boot configs for the 2 different
>> versions, and the 1.2 config refers to sun8i-a23-ippo-q8h-v1.2.dtb to be
>> future proof, so we need to provide a sun8i-a23-ippo-q8h-v1.2.dtb file.
>>
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> ---
>> arch/arm/boot/dts/Makefile | 3 +-
>> arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts | 58 +++++++++++++++++++++++++++
>> 2 files changed, 60 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 4142831..7f66bab 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -478,7 +478,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>> sun7i-a20-olinuxino-micro.dtb \
>> sun7i-a20-pcduino3.dtb
>> dtb-$(CONFIG_MACH_SUN8I) += \
>> - sun8i-a23-ippo-q8h-v5.dtb
>> + sun8i-a23-ippo-q8h-v5.dtb \
>> + sun8i-a23-ippo-q8h-v1.2.dtb
>> dtb-$(CONFIG_MACH_SUN9I) += \
>> sun9i-a80-optimus.dtb
>> dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
>> diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
>> new file mode 100644
>> index 0000000..7056fc2
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
>> @@ -0,0 +1,58 @@
>> +/*
>> + * Copyright 2015 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> + * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public
>> + * License along with this file; if not, write to the Free
>> + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
>> + * MA 02110-1301 USA
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/*
>> + * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
>> + * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
>> + * and it uses different camera sensors.
>> + */
>> +
>> +#include "sun8i-a23-ippo-q8h-v5.dts"
>> +
>> +/ {
>> + model = "Ippo Q8H Dual Core Tablet (v1.2)";
>
> Maybe we should have a separate compatible too then, if we ever need
> to differentiate the two for any other reason (quirks, mostly)?
>
> Something like
> compatible = "ippo,q8h-v5", "ippo,q8h", "allwinner,sun8i-a23";
> and
> compatible = "ippo,q8h-v1.2", "ippo,q8h", "allwinner,sun8i-a23";
>
> in their respective DTs?
Good idea, I'll fix this when I respin this patch-set.
Regards,
Hans
next prev parent reply other threads:[~2015-01-12 12:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-07 20:16 [PATCH 1/3] ARM: dts: sun4i: Add dts file for Chuwi V7 CW0825 tablet Hans de Goede
[not found] ` <1420661775-20424-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-01-07 20:16 ` [PATCH 2/3] ARM: dts: sun7i: Add dts file for Bananapro board Hans de Goede
2015-01-07 20:16 ` [PATCH 3/3] ARM: dts: sun8i: Add dts file for Ippo Q8H v1.2 tablets Hans de Goede
[not found] ` <1420661775-20424-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-01-12 11:24 ` Maxime Ripard
2015-01-12 12:16 ` Hans de Goede [this message]
2015-01-12 11:17 ` [PATCH 1/3] ARM: dts: sun4i: Add dts file for Chuwi V7 CW0825 tablet Maxime Ripard
2015-01-12 11:21 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54B3BB06.1040306@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).