[PATCH v2 1/3] ASoC: codecs: wm8904: add dt ids table

[PATCH v2 1/3] ASoC: codecs: wm8904: add dt ids table

[Bo Shen]

From: Alexander Morozov <linux@meltdown.ru>

Signed-off-by: Alexander Morozov <linux@meltdown.ru>
[Add driver data to distinguish device type]
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

Changes in v2:
- Add driver data for distinguish the device capability.

 sound/soc/codecs/wm8904.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 4d2d2b1..6e3f175 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -2255,10 +2255,32 @@ static const struct i2c_device_id wm8904_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, wm8904_i2c_id);
 
+#ifdef CONFIG_OF
+static enum wm8904_type wm8904_data = WM8904;
+static enum wm8904_type wm8912_data = WM8912;
+
+static const struct of_device_id wm8904_of_match[] = {
+	{
+		.compatible = "wlf,wm8904",
+		.data = &wm8904_data,
+	}, {
+		.compatible = "wlf,wm8912",
+		.data = &wm8912_data,
+	}, {
+		.compatible = "wlf,wm8918",
+		.data = &wm8904_data,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, wm8904_of_match);
+#endif
+
 static struct i2c_driver wm8904_i2c_driver = {
 	.driver = {
 		.name = "wm8904",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(wm8904_of_match),
 	},
 	.probe =    wm8904_i2c_probe,
 	.remove =   wm8904_i2c_remove,
-- 
2.1.0.24.g4109c28

[PATCH v2 2/3] ARM: at91: sama5d3xek/dt: use dt ids for wm8904

[Bo Shen]

From: Alexander Morozov <linux-lCH5ugpmZSMox3rIn2DAYQ@public.gmane.org>

Using the wm8904 device tree compatible string.

Signed-off-by: Alexander Morozov <linux-lCH5ugpmZSMox3rIn2DAYQ@public.gmane.org>
Signed-off-by: Bo Shen <voice.shen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
---

Changes in v2: None

 arch/arm/boot/dts/sama5d3xmb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 49c10d3..2a1aa58 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -45,7 +45,7 @@
 			 */
 			i2c0: i2c@f0014000 {
 				wm8904: wm8904@1a {
-					compatible = "wm8904";
+					compatible = "wlf,wm8904";
 					reg = <0x1a>;
 					clocks = <&pck0>;
 					clock-names = "mclk";
-- 
2.1.0.24.g4109c28

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/3] ARM: at91: at91sam9n12ek/dt: use dt ids for wm8904

[Bo Shen]

Using the device tree ids for wm8904 codec.

Signed-off-by: Bo Shen <voice.shen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
---

Changes in v2: None

 arch/arm/boot/dts/at91sam9n12ek.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 13bb24e..9575c0d 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -54,7 +54,7 @@
 				status = "okay";
 
 				wm8904: codec@1a {
-					compatible = "wm8904";
+					compatible = "wlf,wm8904";
 					reg = <0x1a>;
 					clocks = <&pck0>;
 					clock-names = "mclk";
-- 
2.1.0.24.g4109c28

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] ASoC: codecs: wm8904: add dt ids table

[Nicolas Ferre]

Le 15/12/2014 04:31, Bo Shen a écrit :
> From: Alexander Morozov <linux@meltdown.ru>
> 
> Signed-off-by: Alexander Morozov <linux@meltdown.ru>
> [Add driver data to distinguish device type]
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
> ---
> 
> Changes in v2:
> - Add driver data for distinguish the device capability.
> 
>  sound/soc/codecs/wm8904.c | 22 ++++++++++++++++++++++

Mark,

Do you want us to re-send this patch or can you take it?

On my side, I'm planning to take the 2 last ones of this series: is it
okay for you?

Thanks, bye.

>  1 file changed, 22 insertions(+)
> 
> diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
> index 4d2d2b1..6e3f175 100644
> --- a/sound/soc/codecs/wm8904.c
> +++ b/sound/soc/codecs/wm8904.c
> @@ -2255,10 +2255,32 @@ static const struct i2c_device_id wm8904_i2c_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, wm8904_i2c_id);
>  
> +#ifdef CONFIG_OF
> +static enum wm8904_type wm8904_data = WM8904;
> +static enum wm8904_type wm8912_data = WM8912;
> +
> +static const struct of_device_id wm8904_of_match[] = {
> +	{
> +		.compatible = "wlf,wm8904",
> +		.data = &wm8904_data,
> +	}, {
> +		.compatible = "wlf,wm8912",
> +		.data = &wm8912_data,
> +	}, {
> +		.compatible = "wlf,wm8918",
> +		.data = &wm8904_data,
> +	}, {
> +		/* sentinel */
> +	}
> +};
> +MODULE_DEVICE_TABLE(of, wm8904_of_match);
> +#endif
> +
>  static struct i2c_driver wm8904_i2c_driver = {
>  	.driver = {
>  		.name = "wm8904",
>  		.owner = THIS_MODULE,
> +		.of_match_table = of_match_ptr(wm8904_of_match),
>  	},
>  	.probe =    wm8904_i2c_probe,
>  	.remove =   wm8904_i2c_remove,
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-sound" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] ASoC: codecs: wm8904: add dt ids table

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 506 bytes --]

On Mon, Dec 15, 2014 at 11:31:11AM +0800, Bo Shen wrote:

> +#ifdef CONFIG_OF
> +static enum wm8904_type wm8904_data = WM8904;
> +static enum wm8904_type wm8912_data = WM8912;
> +
> +static const struct of_device_id wm8904_of_match[] = {
> +	{
> +		.compatible = "wlf,wm8904",
> +		.data = &wm8904_data,

Does this end up in the i2c_driver_id driver data or do we need some
extra code when devtype is assigned to check for an of_node and look at
the DT data instead?  That certainly used to be the case...

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH v2 1/3] ASoC: codecs: wm8904: add dt ids table

[Bo Shen]

Hi Mark,

On 01/15/2015 07:54 PM, Mark Brown wrote:
> On Mon, Dec 15, 2014 at 11:31:11AM +0800, Bo Shen wrote:
>
>> +#ifdef CONFIG_OF
>> +static enum wm8904_type wm8904_data = WM8904;
>> +static enum wm8904_type wm8912_data = WM8912;
>> +
>> +static const struct of_device_id wm8904_of_match[] = {
>> +	{
>> +		.compatible = "wlf,wm8904",
>> +		.data = &wm8904_data,
>
> Does this end up in the i2c_driver_id driver data or do we need some
> extra code when devtype is assigned to check for an of_node and look at
> the DT data instead?  That certainly used to be the case...

At the beginning I think as the same as you, and also add the code to 
get the data as I do in <drivers/misc/atmel-ssc.c>. However, as I 
remember, I2C seems only use the compatible string after the comma, that 
means only for "wlf,wm8904", it uses "wm8904" to match. So, I remove all 
the code I added, and just keep these, and it can get the device type 
correctly.

So, when I submit the patch and keep the code as simple as possible.

Thanks.

Best Regards,
Bo Shen

Re: [PATCH v2 1/3] ASoC: codecs: wm8904: add dt ids table

[Nicolas Ferre]

Le 16/01/2015 02:17, Bo Shen a écrit :
> Hi Mark,
> 
> On 01/15/2015 07:54 PM, Mark Brown wrote:
>> On Mon, Dec 15, 2014 at 11:31:11AM +0800, Bo Shen wrote:
>>
>>> +#ifdef CONFIG_OF
>>> +static enum wm8904_type wm8904_data = WM8904;
>>> +static enum wm8904_type wm8912_data = WM8912;
>>> +
>>> +static const struct of_device_id wm8904_of_match[] = {
>>> +	{
>>> +		.compatible = "wlf,wm8904",
>>> +		.data = &wm8904_data,
>>
>> Does this end up in the i2c_driver_id driver data or do we need some
>> extra code when devtype is assigned to check for an of_node and look at
>> the DT data instead?  That certainly used to be the case...
> 
> At the beginning I think as the same as you, and also add the code to 
> get the data as I do in <drivers/misc/atmel-ssc.c>. However, as I 
> remember, I2C seems only use the compatible string after the comma, that 
> means only for "wlf,wm8904", it uses "wm8904" to match. So, I remove all 
> the code I added, and just keep these, and it can get the device type 
> correctly.
> 
> So, when I submit the patch and keep the code as simple as possible.
> 
> Thanks.
> 
> Best Regards,
> Bo Shen

I don't understand what's keeping this patch from being applied. Voice,
do you mind re-sending?

On my side, I take the two patches that apply on AT91 DT (2/3 and 3/3).

Bye,
-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-sound" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] ASoC: codecs: wm8904: add dt ids table

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1074 bytes --]

On Mon, Jan 26, 2015 at 04:24:38PM +0100, Nicolas Ferre wrote:
> Le 16/01/2015 02:17, Bo Shen a écrit :

> >> Does this end up in the i2c_driver_id driver data or do we need some
> >> extra code when devtype is assigned to check for an of_node and look at
> >> the DT data instead?  That certainly used to be the case...

> > At the beginning I think as the same as you, and also add the code to 
> > get the data as I do in <drivers/misc/atmel-ssc.c>. However, as I 
> > remember, I2C seems only use the compatible string after the comma, that 
> > means only for "wlf,wm8904", it uses "wm8904" to match. So, I remove all 
> > the code I added, and just keep these, and it can get the device type 
> > correctly.

> > So, when I submit the patch and keep the code as simple as possible.

> I don't understand what's keeping this patch from being applied. Voice,
> do you mind re-sending?

I need to convince myself that the above actually works and is doing the
right thing; the above explanation sounds like if it works it might be
relying on a bug.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [alsa-devel] [PATCH v2 1/3] ASoC: codecs: wm8904: add dt ids table

[Lars-Peter Clausen]

On 01/26/2015 05:42 PM, Mark Brown wrote:
> On Mon, Jan 26, 2015 at 04:24:38PM +0100, Nicolas Ferre wrote:
>> Le 16/01/2015 02:17, Bo Shen a écrit :
>
>>>> Does this end up in the i2c_driver_id driver data or do we need some
>>>> extra code when devtype is assigned to check for an of_node and look at
>>>> the DT data instead?  That certainly used to be the case...
>
>>> At the beginning I think as the same as you, and also add the code to
>>> get the data as I do in <drivers/misc/atmel-ssc.c>. However, as I
>>> remember, I2C seems only use the compatible string after the comma, that
>>> means only for "wlf,wm8904", it uses "wm8904" to match. So, I remove all
>>> the code I added, and just keep these, and it can get the device type
>>> correctly.
>
>>> So, when I submit the patch and keep the code as simple as possible.
>
>> I don't understand what's keeping this patch from being applied. Voice,
>> do you mind re-sending?
>
> I need to convince myself that the above actually works and is doing the
> right thing; the above explanation sounds like if it works it might be
> relying on a bug.

I'd call it a undocumented feature. But I wouldn't rely on it being around 
for ever. In my opinion to be future proof the driver should explicitly 
handle the OF case in the probe function.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [alsa-devel] [PATCH v2 1/3] ASoC: codecs: wm8904: add dt ids table

[Bo Shen]

Hi Mark, Lars-Perter,

On 01/27/2015 12:49 AM, Lars-Peter Clausen wrote:
> On 01/26/2015 05:42 PM, Mark Brown wrote:
>> On Mon, Jan 26, 2015 at 04:24:38PM +0100, Nicolas Ferre wrote:
>>> Le 16/01/2015 02:17, Bo Shen a écrit :
>>
>>>>> Does this end up in the i2c_driver_id driver data or do we need some
>>>>> extra code when devtype is assigned to check for an of_node and
>>>>> look at
>>>>> the DT data instead?  That certainly used to be the case...
>>
>>>> At the beginning I think as the same as you, and also add the code to
>>>> get the data as I do in <drivers/misc/atmel-ssc.c>. However, as I
>>>> remember, I2C seems only use the compatible string after the comma,
>>>> that
>>>> means only for "wlf,wm8904", it uses "wm8904" to match. So, I remove
>>>> all
>>>> the code I added, and just keep these, and it can get the device type
>>>> correctly.
>>
>>>> So, when I submit the patch and keep the code as simple as possible.
>>
>>> I don't understand what's keeping this patch from being applied. Voice,
>>> do you mind re-sending?
>>
>> I need to convince myself that the above actually works and is doing the
>> right thing; the above explanation sounds like if it works it might be
>> relying on a bug.
>
> I'd call it a undocumented feature. But I wouldn't rely on it being
> around for ever. In my opinion to be future proof the driver should
> explicitly handle the OF case in the probe function.
>

I will add this into probe function in next version.
Thanks.

Best Regards,
Bo Shen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html