* Re: [PATCH 3/3] ARM: dts: add property for maximum ADC clock frequencies
[not found] ` <1421769723-28677-4-git-send-email-stefan@agner.ch>
@ 2015-01-28 18:19 ` Jonathan Cameron
0 siblings, 0 replies; only message in thread
From: Jonathan Cameron @ 2015-01-28 18:19 UTC (permalink / raw)
To: Stefan Agner
Cc: Mark Rutland, devicetree@vger.kernel.org, B38611, Pawel Moll,
Ian Campbell, linux-iio, linux-kernel, maitysanchayan,
Rob Herring, Kumar Gala, shawn.guo, linux-arm-kernel
On 20/01/15 16:02, Stefan Agner wrote:
> The ADC clock frequency is limited depending on modes used. Add
> device tree property which allow to set the mode used and the
> maximum frequency ratings for the instance. These allows to
> set the ADC clock to a frequency which is within specification
> according to the actual mode used.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
This should have been sent to the devicetree list and maintainers
in the first place. Now cc'd.
> ---
> Documentation/devicetree/bindings/iio/adc/vf610-adc.txt | 9 +++++++++
> arch/arm/boot/dts/vfxxx.dtsi | 4 ++++
> 2 files changed, 13 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
> index 1a4a43d..3eb40e2 100644
> --- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
> @@ -11,6 +11,13 @@ Required properties:
> - clock-names: Must contain "adc", matching entry in the clocks property.
> - vref-supply: The regulator supply ADC reference voltage.
>
> +Recommended properties:
> +- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating
> + requirements. Three values are required, depending on conversion mode:
> + - Frequency in normal mode (ADLPC=0, ADHSC=0)
> + - Frequency in high-speed mode (ADLPC=0, ADHSC=1)
> + - Frequency in low-power mode (ADLPC=1, ADHSC=0)
> +
> Example:
> adc0: adc@4003b000 {
> compatible = "fsl,vf610-adc";
> @@ -18,5 +25,7 @@ adc0: adc@4003b000 {
> interrupts = <0 53 0x04>;
> clocks = <&clks VF610_CLK_ADC0>;
> clock-names = "adc";
> + fsl,adck-max-frequency = <30000000>, <40000000>,
> + <20000000>;
> vref-supply = <®_vcc_3v3_mcu>;
> };
> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> index 505969a..7584e0a 100644
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -182,6 +182,8 @@
> clocks = <&clks VF610_CLK_ADC0>;
> clock-names = "adc";
> status = "disabled";
> + fsl,adck-max-frequency = <30000000>, <40000000>,
> + <20000000>;
> };
>
> wdog@4003e000 {
> @@ -361,6 +363,8 @@
> clocks = <&clks VF610_CLK_ADC1>;
> clock-names = "adc";
> status = "disabled";
> + fsl,adck-max-frequency = <30000000>, <40000000>,
> + <20000000>;
> };
>
> esdhc1: esdhc@400b2000 {
>
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2015-01-28 18:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1421769723-28677-1-git-send-email-stefan@agner.ch>
[not found] ` <1421769723-28677-4-git-send-email-stefan@agner.ch>
2015-01-28 18:19 ` [PATCH 3/3] ARM: dts: add property for maximum ADC clock frequencies Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).