Re: [PATCH_V2 09/34] MIPS: jz4740: probe interrupt controller via DT

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

On 02/04/2015 06:21 PM, Zubair Lutfullah Kakakhel wrote:

> From: Paul Burton <paul.burton@imgtec.com>

> Add the appropriate DT node to probe the interrupt controller driver
> using the devicetree, and remove the call to jz4740_intc_init.

> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> ---
>   arch/mips/boot/dts/jz4740.dtsi | 11 +++++++++++
>   arch/mips/jz4740/setup.c       |  2 --
>   2 files changed, 11 insertions(+), 2 deletions(-)

> diff --git a/arch/mips/boot/dts/jz4740.dtsi b/arch/mips/boot/dts/jz4740.dtsi
> index 2d64765c..3841024 100644
> --- a/arch/mips/boot/dts/jz4740.dtsi
> +++ b/arch/mips/boot/dts/jz4740.dtsi
> @@ -9,4 +9,15 @@
>   		interrupt-controller;
>   		compatible = "mti,cpu-interrupt-controller";
>   	};
> +
> +	intc: intc@10001000 {

    Name it "interrupt-controller@10001000", please. I have faint memories of 
already telling you to do this...

> +		compatible = "ingenic,jz4740-intc";
> +		reg = <0x10001000 0x14>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		interrupt-parent = <&cpuintc>;
> +		interrupts = <2>;
> +	};
>   };
[...]

WBR, Sergei