[PATCH 2/4 V2] dt-bindings: Add root properties for Raspberry Pi

[PATCH 2/4 V2] dt-bindings: Add root properties for Raspberry Pi

[Stefan Wahren]

This patch adds root compatible properties for the following boards:
- Raspberry Pi Model A
- Raspberry Pi Model A+
- Raspberry Pi Model B
- Raspberry Pi Model B (no P5)
- Raspberry Pi Model B rev2
- Raspberry Pi Model B+
- Raspberry Pi Compute Module

Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
---

Changes in V2:
- add all currently known Raspberry Pi boards as suggested by
  Stephen Warren

 Documentation/devicetree/bindings/arm/bcm2835.txt |   31 +++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm2835.txt
index ac68348..c78576b 100644
--- a/Documentation/devicetree/bindings/arm/bcm2835.txt
+++ b/Documentation/devicetree/bindings/arm/bcm2835.txt
@@ -1,8 +1,35 @@
 Broadcom BCM2835 device tree bindings
 -------------------------------------------
 
-Boards with the BCM2835 SoC shall have the following properties:
+Raspberry Pi Model A
+Required root node properties:
+compatible = "raspberrypi,model-a", "brcm,bcm2835";
 
-Required root node property:
+Raspberry Pi Model A+
+Required root node properties:
+compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
 
+Raspberry Pi Model B
+Required root node properties:
+compatible = "raspberrypi,model-b", "brcm,bcm2835";
+
+Raspberry Pi Model B (no P5)
+early model B with I2C0 rather than I2C1 routed to the expansion header
+Required root node properties:
+compatible = "raspberrypi,model-b-i2c0", "brcm,bcm2835";
+
+Raspberry Pi Model B rev2
+Required root node properties:
+compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+
+Raspberry Pi Model B+
+Required root node properties:
+compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+
+Raspberry Pi Compute Module
+Required root node properties:
+compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+
+Generic BCM2835 board
+Required root node properties:
 compatible = "brcm,bcm2835";
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/4 V2] dt-bindings: Add root properties for Raspberry Pi

[Stephen Warren]

On 01/19/2015 04:00 AM, Stefan Wahren wrote:
> This patch adds root compatible properties for the following boards:
> - Raspberry Pi Model A
> - Raspberry Pi Model A+
> - Raspberry Pi Model B
> - Raspberry Pi Model B (no P5)
> - Raspberry Pi Model B rev2
> - Raspberry Pi Model B+
> - Raspberry Pi Compute Module

Acked-by: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>

This seems sane to me. One thing I should have asked: What compatible 
values does the RPi Foundation's downstream for all these cases? 
Aligning with that would be nice if possible.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/4 V2] dt-bindings: Add root properties for Raspberry Pi

[Stefan Wahren]

Hi Stephen,

> Stephen Warren <swarren@wwwdotorg.org> hat am 19. Januar 2015 um 18:13
> geschrieben:
>
>
> On 01/19/2015 04:00 AM, Stefan Wahren wrote:
> > This patch adds root compatible properties for the following boards:
> > - Raspberry Pi Model A
> > - Raspberry Pi Model A+
> > - Raspberry Pi Model B
> > - Raspberry Pi Model B (no P5)
> > - Raspberry Pi Model B rev2
> > - Raspberry Pi Model B+
> > - Raspberry Pi Compute Module
>
> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
>
> This seems sane to me. One thing I should have asked: What compatible
> values does the RPi Foundation's downstream for all these cases?

good point. Unfortunately my patches to linux-rpi-kernel are held back because
of too many recipients, so it's possible that someone complain later.

I have looked at chapter 3.1 in [1], but didn't find the any other variants than
B and B+:

  Here, the presence or absence of the "-plus" is the significant thing, not the
"b" -- Model A's and A+'s will 
  use the "b" and "b-plus" variants, respectively.

Also in the newest branch [2]:

bcm2835-rpi-b.dts      -> model = Raspberry Pi Model B
bcm2708-rpi-b.dts      -> model = Raspberry Pi Model B
bcm2708-rpi-b-plus.dts -> model = Raspberry Pi Model B+

Sorry, i don't have any experience with the downstream kernel. So please correct
me if looked at the wrong places.

[1] -
https://github.com/raspberrypi/documentation/blob/master/configuration/device-tree.md
[2] - https://github.com/raspberrypi/linux/tree/rpi-3.18.y/

> Aligning with that would be nice if possible.

Stefan

Re: [PATCH 2/4 V2] dt-bindings: Add root properties for Raspberry Pi

[Stephen Warren]

On 01/19/2015 12:01 PM, Stefan Wahren wrote:
> Hi Stephen,
>
>> Stephen Warren <swarren@wwwdotorg.org> hat am 19. Januar 2015 um 18:13
>> geschrieben:
>>
>>
>> On 01/19/2015 04:00 AM, Stefan Wahren wrote:
>>> This patch adds root compatible properties for the following boards:
>>> - Raspberry Pi Model A
>>> - Raspberry Pi Model A+
>>> - Raspberry Pi Model B
>>> - Raspberry Pi Model B (no P5)
>>> - Raspberry Pi Model B rev2
>>> - Raspberry Pi Model B+
>>> - Raspberry Pi Compute Module
>>
>> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
>>
>> This seems sane to me. One thing I should have asked: What compatible
>> values does the RPi Foundation's downstream for all these cases?
>
> good point. Unfortunately my patches to linux-rpi-kernel are held back because
> of too many recipients, so it's possible that someone complain later.
>
> I have looked at chapter 3.1 in [1], but didn't find the any other variants than
> B and B+:
>
>    Here, the presence or absence of the "-plus" is the significant thing, not the
> "b" -- Model A's and A+'s will
>    use the "b" and "b-plus" variants, respectively.
>
> Also in the newest branch [2]:
>
> bcm2835-rpi-b.dts      -> model = Raspberry Pi Model B
> bcm2708-rpi-b.dts      -> model = Raspberry Pi Model B
> bcm2708-rpi-b-plus.dts -> model = Raspberry Pi Model B+
>
> Sorry, i don't have any experience with the downstream kernel. So please correct
> me if looked at the wrong places.
>
> [1] -
> https://github.com/raspberrypi/documentation/blob/master/configuration/device-tree.md
> [2] - https://github.com/raspberrypi/linux/tree/rpi-3.18.y/

This all matches what I found. I think differentiating between A/B and 
A+/B+ makes sense, so the compatible values in your patch should be 
fine; I'll reply to v2 in just a minute.