[resend PATCH v3 0/4] add usb support for hi6220

[resend PATCH v3 0/4] add usb support for hi6220

[Zhangfei Gao]

v3:
fix typo and add -EPROBE_DEFER of regulator, pointed by Peter

v2:
address comments from Sergei and Peter
add hi6220_phy_setup(false) code

v1:
hi6220 usb controller is inherited from dwc2
add phy accordingly
support otg gadget/host

Zhangfei Gao (4):
  Documentation: dt-bindings: add dt binding info for hi6220 dwc2
  Documentation: dt-bindings: add dt binding info for hi6220
  usb: dwc2: platform: add hi6220 support
  usb: phy: add phy-hi6220-usb

 Documentation/devicetree/bindings/usb/dwc2.txt     |   1 +
 .../devicetree/bindings/usb/hi6220-usb.txt         |  49 ++++
 drivers/usb/dwc2/platform.c                        |  30 ++
 drivers/usb/phy/Kconfig                            |   9 +
 drivers/usb/phy/Makefile                           |   1 +
 drivers/usb/phy/phy-hi6220-usb.c                   | 306 +++++++++++++++++++++
 6 files changed, 396 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt
 create mode 100644 drivers/usb/phy/phy-hi6220-usb.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[resend PATCH v3 1/4] Documentation: dt-bindings: add dt binding info for hi6220 dwc2

[Zhangfei Gao]

Add necessary dwc2 binding documentation for Hisilicon soc: hi6220

Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/dwc2.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index fd132cb..2213682 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -4,6 +4,7 @@ Platform DesignWare HS OTG USB 2.0 controller
 Required properties:
 - compatible : One of:
   - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
+  - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
   - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
   - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[resend PATCH v3 2/4] Documentation: dt-bindings: add dt binding info for hi6220

[Zhangfei Gao]

Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/usb/hi6220-usb.txt         | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt

diff --git a/Documentation/devicetree/bindings/usb/hi6220-usb.txt b/Documentation/devicetree/bindings/usb/hi6220-usb.txt
new file mode 100644
index 0000000..b8278de
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/hi6220-usb.txt
@@ -0,0 +1,49 @@
+Hisilicon hi6220 SoC USB controller
+-----------------------------
+
+usb controller is inherited from dwc2, refer dwc2.txt
+-----
+
+Required properties:
+- compatible: "hisilicon,hi6220-usb"
+Refer to dwc2.txt for dwc2 usb properties
+
+
+PHY:
+-----
+
+Required properties:
+- compatible: "hisilicon,hi6220-usb-phy"
+- vcc-supply: phandle to the regulator that provides power to the PHY.
+- clocks: phandle and clock specifier of the PHY clock.
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
+- hisilicon,gpio-vbus: gpio of detecting vbus.
+- hisilicon,gpio-id: gpio of detecting id.
+
+Example:
+
+	peripheral_ctrl: syscon@f7030000 {
+	        compatible = "syscon";
+	        reg = <0x0 0xf7030000 0x0 0x1000>;
+	};
+
+	usb2_phy: usbphy {
+		compatible = "hisilicon,hi6220-usb-phy";
+		vcc-supply = <&fixed_5v_hub>;
+		hisilicon,gpio-vbus = <&gpio2 6 0>;
+		hisilicon,gpio-id = <&gpio2 5 0>;
+		hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+		clocks = <&clock_sys HI6220_USBOTG_HCLK>;
+	};
+
+	usb: usb@f72c0000 {
+		compatible = "hisilicon,hi6220-usb";
+		reg = <0x0 0xf72c0000 0x0 0x40000>;
+		phys = <&usb2_phy>;
+		dr_mode = "otg";
+		g-use-dma;
+		g-rx-fifo-size = <512>;
+		g-np-tx-fifo-size = <128>;
+		g-tx-fifo-size = <128>;
+		interrupts = <0 77 0x4>;
+	};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [resend PATCH v3 2/4] Documentation: dt-bindings: add dt binding info for hi6220

[Sergei Shtylyov]

Hello.

On 2/10/2015 12:10 PM, Zhangfei Gao wrote:

> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>   .../devicetree/bindings/usb/hi6220-usb.txt         | 49 ++++++++++++++++++++++
>   1 file changed, 49 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt

> diff --git a/Documentation/devicetree/bindings/usb/hi6220-usb.txt b/Documentation/devicetree/bindings/usb/hi6220-usb.txt
> new file mode 100644
> index 0000000..b8278de
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/hi6220-usb.txt
> @@ -0,0 +1,49 @@
> +Hisilicon hi6220 SoC USB controller
> +-----------------------------
[...]
> +PHY:
> +-----
> +
> +Required properties:
> +- compatible: "hisilicon,hi6220-usb-phy"
> +- vcc-supply: phandle to the regulator that provides power to the PHY.
> +- clocks: phandle and clock specifier of the PHY clock.
> +- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
> +- hisilicon,gpio-vbus: gpio of detecting vbus.
> +- hisilicon,gpio-id: gpio of detecting id.

    Actually, GPIO bindings say that GPIO properties should be named 
"[<name>-]gpios".

> +
> +Example:
> +
> +	peripheral_ctrl: syscon@f7030000 {
> +	        compatible = "syscon";
> +	        reg = <0x0 0xf7030000 0x0 0x1000>;
> +	};
> +
> +	usb2_phy: usbphy {

    Please name it "usb-phy" as it better resembles "ethernet-phy" 
standardized by ePAPR.

[...]

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[resend PATCH v3 3/4] usb: dwc2: platform: add hi6220 support

[Zhangfei Gao]

Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/usb/dwc2/platform.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index ae095f0..f7c67db 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -50,6 +50,35 @@
 
 static const char dwc2_driver_name[] = "dwc2";
 
+static const struct dwc2_core_params params_hi6220 = {
+	.otg_cap			= 2,	/* No HNP/SRP capable */
+	.otg_ver			= 0,	/* 1.3 */
+	.dma_enable			= 1,
+	.dma_desc_enable		= 0,
+	.speed				= 0,	/* High Speed */
+	.enable_dynamic_fifo		= 1,
+	.en_multiple_tx_fifo		= 1,
+	.host_rx_fifo_size		= 512,
+	.host_nperio_tx_fifo_size	= 512,
+	.host_perio_tx_fifo_size	= 512,
+	.max_transfer_size		= 65535,
+	.max_packet_count		= 511,
+	.host_channels			= 16,
+	.phy_type			= 1,	/* UTMI */
+	.phy_utmi_width			= 8,
+	.phy_ulpi_ddr			= 0,	/* Single */
+	.phy_ulpi_ext_vbus		= 0,
+	.i2c_enable			= 0,
+	.ulpi_fs_ls			= 0,
+	.host_support_fs_ls_low_power	= 0,
+	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
+	.ts_dline			= 0,
+	.reload_ctl			= 0,
+	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
+					  GAHBCFG_HBSTLEN_SHIFT,
+	.uframe_sched			= 0,
+};
+
 static const struct dwc2_core_params params_bcm2835 = {
 	.otg_cap			= 0,	/* HNP/SRP capable */
 	.otg_ver			= 0,	/* 1.3 */
@@ -129,6 +158,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
 
 static const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+	{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
 	{ .compatible = "snps,dwc2", .data = NULL },
 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

[Zhangfei Gao]

Add usb phy controller for hi6220 platform

Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/usb/phy/Kconfig          |   9 ++
 drivers/usb/phy/Makefile         |   1 +
 drivers/usb/phy/phy-hi6220-usb.c | 306 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 316 insertions(+)
 create mode 100644 drivers/usb/phy/phy-hi6220-usb.c

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c6d0c8e..405a3d0 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -173,6 +173,15 @@ config USB_MXS_PHY
 
 	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
 
+config USB_HI6220_PHY
+	tristate "hi6220 USB PHY support"
+	select USB_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI6220 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config USB_RCAR_PHY
 	tristate "Renesas R-Car USB PHY support"
 	depends on USB || USB_GADGET
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 75f2bba..00172d3 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
 obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
 obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
 obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
diff --git a/drivers/usb/phy/phy-hi6220-usb.c b/drivers/usb/phy/phy-hi6220-usb.c
new file mode 100644
index 0000000..efb4bbb
--- /dev/null
+++ b/drivers/usb/phy/phy-hi6220-usb.c
@@ -0,0 +1,306 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+
+#define SC_PERIPH_CTRL4			0x00c
+
+#define CTRL4_PICO_SIDDQ		BIT(6)
+#define CTRL4_PICO_OGDISABLE		BIT(8)
+#define CTRL4_PICO_VBUSVLDEXT		BIT(10)
+#define CTRL4_PICO_VBUSVLDEXTSEL	BIT(11)
+#define CTRL4_OTG_PHY_SEL		BIT(21)
+
+#define SC_PERIPH_CTRL5			0x010
+
+#define CTRL5_USBOTG_RES_SEL		BIT(3)
+#define CTRL5_PICOPHY_ACAENB		BIT(4)
+#define CTRL5_PICOPHY_BC_MODE		BIT(5)
+#define CTRL5_PICOPHY_CHRGSEL		BIT(6)
+#define CTRL5_PICOPHY_VDATSRCEND	BIT(7)
+#define CTRL5_PICOPHY_VDATDETENB	BIT(8)
+#define CTRL5_PICOPHY_DCDENB		BIT(9)
+#define CTRL5_PICOPHY_IDDIG		BIT(10)
+
+#define SC_PERIPH_CTRL8			0x018
+#define SC_PERIPH_RSTEN0		0x300
+#define SC_PERIPH_RSTDIS0		0x304
+
+#define RST0_USBOTG_BUS			BIT(4)
+#define RST0_POR_PICOPHY		BIT(5)
+#define RST0_USBOTG			BIT(6)
+#define RST0_USBOTG_32K			BIT(7)
+
+#define EYE_PATTERN_PARA		0x7053348c
+
+struct hi6220_priv {
+	struct usb_phy phy;
+	struct delayed_work work;
+	struct regmap *reg;
+	struct clk *clk;
+	struct regulator *vcc;
+	struct device *dev;
+	int gpio_vbus;
+	int gpio_id;
+	enum usb_otg_state state;
+};
+
+static void hi6220_start_periphrals(struct hi6220_priv *priv, bool on)
+{
+	struct usb_otg *otg = priv->phy.otg;
+
+	if (!otg->gadget)
+		return;
+
+	if (on)
+		usb_gadget_connect(otg->gadget);
+	else
+		usb_gadget_disconnect(otg->gadget);
+}
+
+static void hi6220_detect_work(struct work_struct *work)
+{
+	struct hi6220_priv *priv =
+		container_of(work, struct hi6220_priv, work.work);
+	int gpio_id, gpio_vbus;
+	enum usb_otg_state state;
+
+	if (!gpio_is_valid(priv->gpio_id) || !gpio_is_valid(priv->gpio_vbus))
+		return;
+
+	gpio_id = gpio_get_value_cansleep(priv->gpio_id);
+	gpio_vbus = gpio_get_value_cansleep(priv->gpio_vbus);
+
+	if (gpio_vbus == 0) {
+		if (gpio_id == 1)
+			state = OTG_STATE_B_PERIPHERAL;
+		else
+			state = OTG_STATE_A_HOST;
+	} else {
+		state = OTG_STATE_A_HOST;
+	}
+
+	if (priv->state != state) {
+		hi6220_start_periphrals(priv, state == OTG_STATE_B_PERIPHERAL);
+		priv->state = state;
+	}
+}
+
+static irqreturn_t hiusb_gpio_intr(int irq, void *data)
+{
+	struct hi6220_priv *priv = (struct hi6220_priv *)data;
+
+	/* add debounce time */
+	schedule_delayed_work(&priv->work, msecs_to_jiffies(100));
+	return IRQ_HANDLED;
+}
+
+static int hi6220_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
+{
+	otg->gadget = gadget;
+	return 0;
+}
+
+static int hi6220_phy_setup(struct hi6220_priv *priv, bool on)
+{
+	struct regmap *reg = priv->reg;
+	u32 val, mask;
+	int ret;
+
+	if (priv->reg == NULL)
+		return 0;
+
+	if (on) {
+		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
+		      RST0_USBOTG | RST0_USBOTG_32K;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val);
+		if (ret)
+			goto out;
+
+		val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
+		mask = val | CTRL5_PICOPHY_BC_MODE;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val);
+		if (ret)
+			goto out;
+
+		val =  CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
+		       CTRL4_OTG_PHY_SEL;
+		mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+		if (ret)
+			goto out;
+
+		ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
+		if (ret)
+			goto out;
+	} else {
+		val = CTRL4_PICO_SIDDQ;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+		if (ret)
+			goto out;
+
+		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
+		      RST0_USBOTG | RST0_USBOTG_32K;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val);
+		if (ret)
+			goto out;
+	}
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to setup phy ret: %d\n", ret);
+	return ret;
+}
+
+static int hi6220_phy_probe(struct platform_device *pdev)
+{
+	struct hi6220_priv *priv;
+	struct usb_otg *otg;
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	int ret, irq;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->phy.dev = &pdev->dev;
+	priv->phy.otg = otg;
+	priv->phy.label = "hi6220";
+	priv->phy.type = USB_PHY_TYPE_USB2;
+	otg->set_peripheral = hi6220_set_peripheral;
+	platform_set_drvdata(pdev, priv);
+
+	priv->gpio_vbus = of_get_named_gpio(np, "hisilicon,gpio-vbus", 0);
+	if (priv->gpio_vbus == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (!gpio_is_valid(priv->gpio_vbus)) {
+		dev_err(dev, "invalid gpio %d\n", priv->gpio_vbus);
+		return -ENODEV;
+	}
+
+	priv->gpio_id = of_get_named_gpio(np, "hisilicon,gpio-id", 0);
+	if (priv->gpio_id == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (!gpio_is_valid(priv->gpio_id)) {
+		dev_err(dev, "invalid gpio %d\n", priv->gpio_id);
+		return -ENODEV;
+	}
+
+	priv->reg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+					"hisilicon,peripheral-syscon");
+	if (IS_ERR(priv->reg))
+		priv->reg = NULL;
+
+	ret = devm_gpio_request_one(dev, priv->gpio_vbus,
+				    GPIOF_IN, "gpio_vbus");
+	if (ret < 0) {
+		dev_err(dev, "gpio request failed for gpio_vbus\n");
+		return ret;
+	}
+
+	ret = devm_gpio_request_one(dev, priv->gpio_id, GPIOF_IN, "gpio_id");
+	if (ret < 0) {
+		dev_err(dev, "gpio request failed for gpio_id\n");
+		return ret;
+	}
+
+	priv->vcc = devm_regulator_get(dev, "vcc");
+	if (IS_ERR(priv->vcc)) {
+		if (PTR_ERR(priv->vcc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "No regulator found\n");
+	} else {
+		ret = regulator_enable(priv->vcc);
+		if (ret) {
+			dev_err(dev, "Failed to enable regulator\n");
+			return -ENODEV;
+		}
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		regulator_disable(priv->vcc);
+		return PTR_ERR(priv->clk);
+	}
+	clk_prepare_enable(priv->clk);
+	INIT_DELAYED_WORK(&priv->work, hi6220_detect_work);
+
+	irq = gpio_to_irq(priv->gpio_vbus);
+	ret = devm_request_irq(dev, gpio_to_irq(priv->gpio_vbus),
+			       hiusb_gpio_intr, IRQF_NO_SUSPEND |
+			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			       "vbus_gpio_intr", priv);
+	if (ret) {
+		dev_err(dev, "request gpio irq failed.\n");
+		goto err_irq;
+	}
+
+	hi6220_phy_setup(priv, true);
+	ret = usb_add_phy_dev(&priv->phy);
+	if (ret) {
+		dev_err(dev, "Can't register transceiver\n");
+		goto err_irq;
+	}
+	schedule_delayed_work(&priv->work, 0);
+
+	return 0;
+err_irq:
+	cancel_delayed_work_sync(&priv->work);
+	clk_disable_unprepare(priv->clk);
+	regulator_disable(priv->vcc);
+	return ret;
+}
+
+static int hi6220_phy_remove(struct platform_device *pdev)
+{
+	struct hi6220_priv *priv = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&priv->work);
+	hi6220_phy_setup(priv, false);
+	clk_disable_unprepare(priv->clk);
+	regulator_disable(priv->vcc);
+	return 0;
+}
+
+static const struct of_device_id hi6220_phy_of_match[] = {
+	{.compatible = "hisilicon,hi6220-usb-phy",},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, hi6220_phy_of_match);
+
+static struct platform_driver hi6220_phy_driver = {
+	.probe	= hi6220_phy_probe,
+	.remove	= hi6220_phy_remove,
+	.driver = {
+		.name	= "hi6220-usb-phy",
+		.of_match_table	= hi6220_phy_of_match,
+	}
+};
+module_platform_driver(hi6220_phy_driver);
+
+MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver");
+MODULE_ALIAS("platform:hi6220-usb-phy");
+MODULE_LICENSE("GPL");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1635 bytes --]

On Tue, Feb 10, 2015 at 05:10:04PM +0800, Zhangfei Gao wrote:
> Add usb phy controller for hi6220 platform
> 
> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  drivers/usb/phy/Kconfig          |   9 ++
>  drivers/usb/phy/Makefile         |   1 +
>  drivers/usb/phy/phy-hi6220-usb.c | 306 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 316 insertions(+)
>  create mode 100644 drivers/usb/phy/phy-hi6220-usb.c
> 
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index c6d0c8e..405a3d0 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -173,6 +173,15 @@ config USB_MXS_PHY
>  
>  	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
>  
> +config USB_HI6220_PHY
> +	tristate "hi6220 USB PHY support"
> +	select USB_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the HISILICON HI6220 USB PHY.
> +
> +	  To compile this driver as a module, choose M here.
> +
>  config USB_RCAR_PHY
>  	tristate "Renesas R-Car USB PHY support"
>  	depends on USB || USB_GADGET
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 75f2bba..00172d3 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
>  obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
>  obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
>  obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
> +obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o

new drivers only on drivers/phy/, sorry.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

[zhangfei]

On 02/10/2015 10:48 PM, Felipe Balbi wrote:
> On Tue, Feb 10, 2015 at 05:10:04PM +0800, Zhangfei Gao wrote:
>> Add usb phy controller for hi6220 platform
>>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> ---
>>   drivers/usb/phy/Kconfig          |   9 ++
>>   drivers/usb/phy/Makefile         |   1 +
>>   drivers/usb/phy/phy-hi6220-usb.c | 306 +++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 316 insertions(+)
>>   create mode 100644 drivers/usb/phy/phy-hi6220-usb.c
>>
>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> index c6d0c8e..405a3d0 100644
>> --- a/drivers/usb/phy/Kconfig
>> +++ b/drivers/usb/phy/Kconfig
>> @@ -173,6 +173,15 @@ config USB_MXS_PHY
>>
>>   	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
>>
>> +config USB_HI6220_PHY
>> +	tristate "hi6220 USB PHY support"
>> +	select USB_PHY
>> +	select MFD_SYSCON
>> +	help
>> +	  Enable this to support the HISILICON HI6220 USB PHY.
>> +
>> +	  To compile this driver as a module, choose M here.
>> +
>>   config USB_RCAR_PHY
>>   	tristate "Renesas R-Car USB PHY support"
>>   	depends on USB || USB_GADGET
>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>> index 75f2bba..00172d3 100644
>> --- a/drivers/usb/phy/Makefile
>> +++ b/drivers/usb/phy/Makefile
>> @@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
>>   obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
>>   obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
>>   obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
>> +obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
>
> new drivers only on drivers/phy/, sorry.
>
OK, thanks for the info, I don't know this at all.
So even usb phy should be put under drivers/phy/.

Will change that.

Thanks Felipe
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 2001 bytes --]

On Tue, Feb 10, 2015 at 10:53:23PM +0800, zhangfei wrote:
> 
> 
> On 02/10/2015 10:48 PM, Felipe Balbi wrote:
> >On Tue, Feb 10, 2015 at 05:10:04PM +0800, Zhangfei Gao wrote:
> >>Add usb phy controller for hi6220 platform
> >>
> >>Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> >>---
> >>  drivers/usb/phy/Kconfig          |   9 ++
> >>  drivers/usb/phy/Makefile         |   1 +
> >>  drivers/usb/phy/phy-hi6220-usb.c | 306 +++++++++++++++++++++++++++++++++++++++
> >>  3 files changed, 316 insertions(+)
> >>  create mode 100644 drivers/usb/phy/phy-hi6220-usb.c
> >>
> >>diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> >>index c6d0c8e..405a3d0 100644
> >>--- a/drivers/usb/phy/Kconfig
> >>+++ b/drivers/usb/phy/Kconfig
> >>@@ -173,6 +173,15 @@ config USB_MXS_PHY
> >>
> >>  	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
> >>
> >>+config USB_HI6220_PHY
> >>+	tristate "hi6220 USB PHY support"
> >>+	select USB_PHY
> >>+	select MFD_SYSCON
> >>+	help
> >>+	  Enable this to support the HISILICON HI6220 USB PHY.
> >>+
> >>+	  To compile this driver as a module, choose M here.
> >>+
> >>  config USB_RCAR_PHY
> >>  	tristate "Renesas R-Car USB PHY support"
> >>  	depends on USB || USB_GADGET
> >>diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> >>index 75f2bba..00172d3 100644
> >>--- a/drivers/usb/phy/Makefile
> >>+++ b/drivers/usb/phy/Makefile
> >>@@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
> >>  obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
> >>  obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
> >>  obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
> >>+obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
> >
> >new drivers only on drivers/phy/, sorry.
> >
> OK, thanks for the info, I don't know this at all.
> So even usb phy should be put under drivers/phy/.
> 
> Will change that.

yes, thank you

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

RE: [resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

[Peter Chen]

 
> > Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > ---
> >  drivers/usb/phy/Kconfig          |   9 ++
> >  drivers/usb/phy/Makefile         |   1 +
> >  drivers/usb/phy/phy-hi6220-usb.c | 306
> > +++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 316 insertions(+)
> >  create mode 100644 drivers/usb/phy/phy-hi6220-usb.c
> >
> > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index
> > c6d0c8e..405a3d0 100644
> > --- a/drivers/usb/phy/Kconfig
> > +++ b/drivers/usb/phy/Kconfig
> > @@ -173,6 +173,15 @@ config USB_MXS_PHY
> >
> >  	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
> >
> > +config USB_HI6220_PHY
> > +	tristate "hi6220 USB PHY support"
> > +	select USB_PHY
> > +	select MFD_SYSCON
> > +	help
> > +	  Enable this to support the HISILICON HI6220 USB PHY.
> > +
> > +	  To compile this driver as a module, choose M here.
> > +
> >  config USB_RCAR_PHY
> >  	tristate "Renesas R-Car USB PHY support"
> >  	depends on USB || USB_GADGET
> > diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index
> > 75f2bba..00172d3 100644
> > --- a/drivers/usb/phy/Makefile
> > +++ b/drivers/usb/phy/Makefile
> > @@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-
> samsung-usb.o
> >  obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
> >  obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
> >  obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
> > +obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
> 
> new drivers only on drivers/phy/, sorry.
> 

This driver has many USB dependencies, like otg, gadget. I don't know it
can use generic phy currently.

Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

[Baruch Siach]

Hi Peter, Felipe,

> > new drivers only on drivers/phy/, sorry.
> 
> This driver has many USB dependencies, like otg, gadget. I don't know it
> can use generic phy currently.

I would like to remind you the thread at 
http://thread.gmane.org/gmane.linux.kernel/1858137. I have a USB PHY driver 
here that depends on notify_connect/notify_disconnect, which are not currently 
provided by the generic phy infrastructure (drivers/phy/). What would be 
acceptable solution for this case?

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org - tel: +972.2.679.5364, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 675 bytes --]

On Wed, Feb 11, 2015 at 11:10:31AM +0200, Baruch Siach wrote:
> Hi Peter, Felipe,
> 
> > > new drivers only on drivers/phy/, sorry.
> > 
> > This driver has many USB dependencies, like otg, gadget. I don't know it
> > can use generic phy currently.
> 
> I would like to remind you the thread at 
> http://thread.gmane.org/gmane.linux.kernel/1858137. I have a USB PHY driver 
> here that depends on notify_connect/notify_disconnect, which are not currently 
> provided by the generic phy infrastructure (drivers/phy/). What would be 
> acceptable solution for this case?

work with Kishon (generic phy maintainer) to add missing pieces you
need.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1967 bytes --]

On Wed, Feb 11, 2015 at 01:30:53AM +0000, Peter Chen wrote:
>  
> > > Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > > ---
> > >  drivers/usb/phy/Kconfig          |   9 ++
> > >  drivers/usb/phy/Makefile         |   1 +
> > >  drivers/usb/phy/phy-hi6220-usb.c | 306
> > > +++++++++++++++++++++++++++++++++++++++
> > >  3 files changed, 316 insertions(+)
> > >  create mode 100644 drivers/usb/phy/phy-hi6220-usb.c
> > >
> > > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index
> > > c6d0c8e..405a3d0 100644
> > > --- a/drivers/usb/phy/Kconfig
> > > +++ b/drivers/usb/phy/Kconfig
> > > @@ -173,6 +173,15 @@ config USB_MXS_PHY
> > >
> > >  	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
> > >
> > > +config USB_HI6220_PHY
> > > +	tristate "hi6220 USB PHY support"
> > > +	select USB_PHY
> > > +	select MFD_SYSCON
> > > +	help
> > > +	  Enable this to support the HISILICON HI6220 USB PHY.
> > > +
> > > +	  To compile this driver as a module, choose M here.
> > > +
> > >  config USB_RCAR_PHY
> > >  	tristate "Renesas R-Car USB PHY support"
> > >  	depends on USB || USB_GADGET
> > > diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index
> > > 75f2bba..00172d3 100644
> > > --- a/drivers/usb/phy/Makefile
> > > +++ b/drivers/usb/phy/Makefile
> > > @@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-
> > samsung-usb.o
> > >  obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
> > >  obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
> > >  obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
> > > +obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
> > 
> > new drivers only on drivers/phy/, sorry.
> > 
> 
> This driver has many USB dependencies, like otg, gadget. I don't know it
> can use generic phy currently.

then we improve generic phy framework. It's about time we moved
everything to that anyway.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

[zhangfei]

On 02/10/2015 10:48 PM, Felipe Balbi wrote:

>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> index c6d0c8e..405a3d0 100644
>> --- a/drivers/usb/phy/Kconfig
>> +++ b/drivers/usb/phy/Kconfig
>> @@ -173,6 +173,15 @@ config USB_MXS_PHY
>>
>>   	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
>>
>> +config USB_HI6220_PHY
>> +	tristate "hi6220 USB PHY support"
>> +	select USB_PHY
>> +	select MFD_SYSCON
>> +	help
>> +	  Enable this to support the HISILICON HI6220 USB PHY.
>> +
>> +	  To compile this driver as a module, choose M here.
>> +
>>   config USB_RCAR_PHY
>>   	tristate "Renesas R-Car USB PHY support"
>>   	depends on USB || USB_GADGET
>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>> index 75f2bba..00172d3 100644
>> --- a/drivers/usb/phy/Makefile
>> +++ b/drivers/usb/phy/Makefile
>> @@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
>>   obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
>>   obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
>>   obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
>> +obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
>
> new drivers only on drivers/phy/, sorry.
>
One more quesiton.
Should I also move Documentation/devicetree/bindings/usb/hi6220-usb.txt 
to Documentation/devicetree/bindings/phy/?

I describing both usb controller and phy here, is it still should be put 
under Documentation/devicetree/bindings/usb/?

Hisilicon hi6220 SoC USB controller
-----------------------------

usb controller is inherited from dwc2, refer dwc2.txt
-----

Required properties:
- compatible: "hisilicon,hi6220-usb"
Refer to dwc2.txt for dwc2 usb properties


PHY:
-----

Required properties:
- compatible: "hisilicon,hi6220-usb-phy"
- vcc-supply: phandle to the regulator that provides power to the PHY.
- clocks: phandle and clock specifier of the PHY clock.
- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
- hisilicon,vbus-gpios: gpio of detecting vbus.
- hisilicon,id-gpios: gpio of detecting id.

Example:

	sys_ctrl: syscon@f7030000 {
		compatible = "hisilicon,sysctrl", "syscon";
	        reg = <0x0 0xf7030000 0x0 0x1000>;
	};

	usb_phy: usb-phy {
		compatible = "hisilicon,hi6220-usb-phy";
		vcc-supply = <&fixed_5v_hub>;
		hisilicon,vbus-gpios = <&gpio2 6 0>;
		hisilicon,id-gpios = <&gpio2 5 0>;
		hisilicon,peripheral-syscon = <&sys_ctrl>;
		clocks = <&clock_sys HI6220_USBOTG_HCLK>;
	};

	usb: usb@f72c0000 {
		compatible = "hisilicon,hi6220-usb";
		reg = <0x0 0xf72c0000 0x0 0x40000>;
		phys = <&usb_phy>;
		dr_mode = "otg";
		g-use-dma;
		g-rx-fifo-size = <512>;
		g-np-tx-fifo-size = <128>;
		g-tx-fifo-size = <128>;
		interrupts = <0 77 0x4>;
	};




--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html