From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: Re: [PATCH v3 0/4] phy: ti-pipe3: fixes for 3.19-rc Date: Wed, 18 Feb 2015 10:00:20 +0200 Message-ID: <54E44694.4070801@ti.com> References: <1421151802-7396-1-git-send-email-rogerq@ti.com> <20150113155409.GA2419@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20150113155409.GA2419@atomide.com> Sender: linux-kernel-owner@vger.kernel.org To: Tony Lindgren , kishon@ti.com Cc: nm@ti.com, balbi@ti.com, george.cherian@ti.com, nsekhar@ti.com, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 13/01/15 17:54, Tony Lindgren wrote: > * Roger Quadros [150113 04:26]: >> Hi, >> >> During system suspend L3INIT_960M_GFCLK and L3INIT_480M_GFCLK clocks remain >> active on the DRA7 platform. This is because the pipe3 driver doesn't shut >> them off as part of .suspend(). Patch 1 addresses this issue. >> >> SATA on both OMAP5 and DRA7 breaks when SATA drive is plugged in after a >> system suspend/resume or if AHCI_PLATFORM driver is used as module. >> Patches 2,3,4 fix it. >> >> Hope to get these patches in through the 3.19-rc cycle. >> >> Tony, >> >> Do you wish to take the DTS patches or let them go in through PHY tree? > > Those look ok to me to merge along with the fixes, will ack those two. > Looks like this missed 3.19-rc. My bad for not following up. Kishon, can you please queue these for 3.20-rc? Thanks. cheers, -roger