From: "Andreas Färber" <afaerber@suse.de>
To: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>,
Kamil Debski <k.debski@samsung.com>,
Jean Delvare <jdelvare@suse.de>,
Guenter Roeck <linux@roeck-us.net>, Kukjin Kim <kgene@kernel.org>,
lm-sensors@lm-sensors.org,
Linux PM list <linux-pm@vger.kernel.org>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
devicetree@vger.kernel.org,
Lukasz Majewski <l.majewski@majess.pl>,
Kukjin Kim <kgene.kim@samsung.com>,
linux-kernel@vger.kernel.org,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Abhilash Kesavan <kesavan.abhilash@gmail.com>,
Abhilash Kesavan <a.kesavan@samsung.com>
Subject: Re: [PATCH v4 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board
Date: Wed, 18 Feb 2015 14:16:26 +0100 [thread overview]
Message-ID: <54E490AA.3020301@suse.de> (raw)
In-Reply-To: <1424254056-5904-5-git-send-email-l.majewski@samsung.com>
Am 18.02.2015 um 11:07 schrieb Lukasz Majewski:
> From: Kamil Debski <k.debski@samsung.com>
>
> Add pwm-fan node to the Odroid-U3 board file to enable PWM control of the
> cooling fan. In addition, add the "pwm" label to the pwm@139D0000 node
> in the exynos4412.dtsi.
>
> Signed-off-by: Kamil Debski <k.debski@samsung.com>
> [Rebased on the newest mainline by l.majewski@samsung.com]
You need to sign off patches you submit.
> ---
> Changes since v1:
> - added pwm label to the pwm@139D0000 node in exynos4.dtsi
> - use the pwm label in the exynos4412-odroidu3.dts
> - change order or properties in the pwn-fan node, to be sorted
> in alphabetical order
>
> ---
> arch/arm/boot/dts/exynos4.dtsi | 2 +-
> arch/arm/boot/dts/exynos4412-odroidu3.dts | 13 +++++++++++++
> 2 files changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> index f18d746..75266e3 100644
> --- a/arch/arm/boot/dts/exynos4.dtsi
> +++ b/arch/arm/boot/dts/exynos4.dtsi
> @@ -582,7 +582,7 @@
> status = "disabled";
> };
>
> - pwm@139D0000 {
> + pwm: pwm@139D0000 {
> compatible = "samsung,exynos4210-pwm";
> reg = <0x139D0000 0x1000>;
> interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> index c8a64be..60bd1e4 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> @@ -31,6 +31,19 @@
> linux,default-trigger = "heartbeat";
> };
> };
> +
> + pwm-fan {
> + compatible = "pwm-fan";
> + pwms = <&pwm 0 10000 0>;
> + status = "okay";
Status "okay" is only needed for pre-existing nodes that would have
status "disabled" otherwise, such as below. Just drop it here.
Regards,
Andreas
> + };
> +};
> +
> +&pwm {
> + pinctrl-0 = <&pwm0_out>;
> + pinctrl-names = "default";
> + samsung,pwm-outputs = <0>;
> + status = "okay";
> };
>
> &usb3503 {
>
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG Nürnberg)
next prev parent reply other threads:[~2015-02-18 13:16 UTC|newest]
Thread overview: 117+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-18 10:13 [PATCH 0/9] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-18 10:13 ` [PATCH 1/9] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2014-12-18 10:13 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:42 ` Sjoerd Simons
2014-12-19 15:32 ` Lukasz Majewski
2014-12-19 16:02 ` Guenter Roeck
2014-12-19 16:13 ` Lukasz Majewski
2015-01-05 10:50 ` Sjoerd Simons
[not found] ` <1420455034.15910.53.camel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2015-01-14 13:56 ` Lukasz Majewski
2015-01-15 8:57 ` Sjoerd Simons
2014-12-18 14:27 ` Guenter Roeck
[not found] ` <5492E46C.3080100-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2014-12-19 16:25 ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 3/9] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-18 10:13 ` [PATCH 4/9] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2014-12-18 10:13 ` [PATCH 5/9] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-18 10:13 ` [PATCH 6/9] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-18 10:13 ` [PATCH 7/9] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:13 ` [PATCH 8/9] hwmon: thermal: Provide 'default-pulse-width' property to setup FAN on boot Lukasz Majewski
2014-12-18 10:13 ` [PATCH 9/9] hwmon: thermal: dts: Disable FAN on boot on the Odroid U3 Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-01-02 18:54 ` Eduardo Valentin
2015-01-02 19:03 ` Eduardo Valentin
2015-01-14 15:01 ` Lukasz Majewski
2015-01-14 18:32 ` Eduardo Valentin
2015-01-15 8:43 ` Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
[not found] ` <1419265668-32283-3-git-send-email-l.majewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-01-02 18:40 ` Eduardo Valentin
2015-01-14 15:07 ` Lukasz Majewski
2015-01-14 18:28 ` Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-01-02 18:51 ` Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-01-02 18:52 ` Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-29 12:52 ` Guenter Roeck
2014-12-22 16:27 ` [PATCH v2 7/8] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-29 12:50 ` Guenter Roeck
2014-12-22 16:27 ` [PATCH v2 8/8] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
[not found] ` <1418897591-18332-1-git-send-email-l.majewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-02-06 16:59 ` [PATCH v3 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-06 18:27 ` Guenter Roeck
2015-02-08 20:52 ` Lukasz Majewski
[not found] ` <1423241948-31981-1-git-send-email-l.majewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-02-06 16:59 ` [PATCH v3 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-06 18:36 ` Guenter Roeck
2015-02-08 21:36 ` Lukasz Majewski
2015-02-09 4:40 ` Guenter Roeck
2015-02-06 16:59 ` [PATCH v3 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-24 19:21 ` Eduardo Valentin
2015-02-25 12:26 ` Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-24 19:21 ` Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-24 19:25 ` Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-18 13:16 ` Andreas Färber [this message]
2015-02-18 10:07 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-24 19:37 ` Eduardo Valentin
2015-02-25 13:28 ` Lukasz Majewski
2015-02-25 18:30 ` Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-21 0:26 ` Guenter Roeck
2015-02-23 16:13 ` Lukasz Majewski
2015-02-23 16:23 ` Guenter Roeck
2015-02-23 16:51 ` Lukasz Majewski
2015-02-23 16:59 ` Guenter Roeck
2015-02-18 10:07 ` [PATCH v4 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-25 19:11 ` Eduardo Valentin
2015-02-25 19:13 ` Eduardo Valentin
2015-02-25 15:34 ` [PATCH v5 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-25 18:49 ` Eduardo Valentin
2015-02-25 15:34 ` [PATCH v5 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-25 18:24 ` Eduardo Valentin
2015-02-25 17:18 ` [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Guenter Roeck
2015-02-25 18:29 ` Eduardo Valentin
2015-02-25 18:42 ` Guenter Roeck
2015-02-26 13:59 ` [PATCH v6 " Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-26 14:12 ` Guenter Roeck
2015-02-26 14:40 ` Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND RESEND v6 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-08-11 13:07 ` [PATCH RESEND v6 0/3] dts: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-08-11 13:07 ` [PATCH RESEND v6 1/3] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-08-13 0:17 ` Krzysztof Kozlowski
2015-08-14 9:36 ` Kukjin Kim
2015-08-16 9:35 ` Krzysztof Kozlowski
2015-09-16 11:00 ` [PATCH RESEND v6 0/3] dts: thermal: Odroid U3: Provide support for Odroid U3 fan Thomas Pietrowski
2015-09-16 11:57 ` Krzysztof Kozlowski
2015-08-11 13:14 ` [PATCH RESEND v6 2/3] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-08-13 0:35 ` Krzysztof Kozlowski
2015-08-11 13:15 ` [PATCH RESEND v6 3/3] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-08-13 0:35 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54E490AA.3020301@suse.de \
--to=afaerber@suse.de \
--cc=a.kesavan@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=jdelvare@suse.de \
--cc=k.debski@samsung.com \
--cc=kesavan.abhilash@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=kgene@kernel.org \
--cc=l.majewski@majess.pl \
--cc=l.majewski@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=sjoerd.simons@collabora.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).