From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Boyd Subject: Re: [PATCH 0/3] arm: msm: Use timer DT node for qcom watchdog config Date: Mon, 23 Feb 2015 14:07:30 -0800 Message-ID: <54EBA4A2.1050607@codeaurora.org> References: <1424485176-8348-1-git-send-email-mathieu@codeaurora.org> <5879121.Ud0l5ICsCF@wuerfel> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <5879121.Ud0l5ICsCF@wuerfel> Sender: linux-watchdog-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Arnd Bergmann , Mathieu Olivari Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, corbet-T1hC0tSOHrs@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, standby24x7-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org On 02/23/15 13:35, Arnd Bergmann wrote: > On Friday 20 February 2015 18:19:33 Mathieu Olivari wrote: >> This change is done as a follow-up to the following thread: >> https://lkml.org/lkml/2014/10/1/436 >> >> qcom-wdt is currently assuming the presence of a dedicated node in DT >> to gets its configuration. However, on msm architecture, the watchdog is >> usually part of the timer block. So this patch-set is changing the driver >> and slightly enhancing the timer DT bindings to provide the relevant clocks >> and interrupts. >> >> Mathieu Olivari (3): >> watchdog: qcom: use timer devicetree binding >> ARM: qcom: add description of KPSS WDT for IPQ8064 >> ARM: msm: add watchdog entries to DT timer binding doc >> >> Documentation/devicetree/bindings/arm/msm/timer.txt | 16 +++++++++++++--- >> arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++++++++- >> drivers/watchdog/qcom-wdt.c | 21 +++++++++++++++------ >> 3 files changed, 41 insertions(+), 10 deletions(-) >> >> > What about the binding document in > Documentation/devicetree/bindings/watchdog/qcom-wdt.txt? > > We can rewrite it for platforms starting with msm8974 and beyond or delete it and write a new binding. It's a similar hardware block split out from the timers and then made to use a SPI instead of a PPI for the interrupt sources. We also lost the CPU remapping feature so there is really only one watchdog instead of 2 per cpu. Oh and the register offsets are different, but otherwise the registers are the same. ---8<----- From: Stephen Boyd Subject: [PATCH] Documentation: qcom-wdt: Update binding for individual block On msm8974 and beyond the KPSS watchdog is split out of the timer block and made to be a single instance instead of per-cpu. Let's update the binding to reflect this and replace the binding that is handled by the qcom,kpss-timer binding. Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/watchdog/qcom-wdt.txt | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt index 4726924d034e..78b92bec4c3a 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt @@ -2,14 +2,10 @@ Qualcomm Krait Processor Sub-system (KPSS) Watchdog --------------------------------------------------- Required properties : -- compatible : shall contain only one of the following: - - "qcom,kpss-wdt-msm8960" - "qcom,kpss-wdt-apq8064" - "qcom,kpss-wdt-ipq8064" - +- compatible : shall contain "qcom,kpss-wdt" - reg : shall contain base register location and length - clocks : shall contain the input clock +- interrupts : shall contain the bark and bite interrupts in that order Optional properties : - timeout-sec : shall contain the default watchdog timeout in seconds, @@ -17,8 +13,9 @@ Optional properties : Example: watchdog@208a038 { - compatible = "qcom,kpss-wdt-ipq8064"; - reg = <0x0208a038 0x40>; + compatible = "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = <0 3 0>, <0 4 0>; clocks = <&sleep_clk>; timeout-sec = <10>; }; -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html