From mboxrd@z Thu Jan 1 00:00:00 1970 From: Murali Karicheri Subject: Re: [PATCH - v7] of: Move of_dma_configure() to device.c to help re-use Date: Tue, 3 Mar 2015 17:54:25 -0500 Message-ID: <54F63BA1.8030708@ti.com> References: <1425333548-8802-1-git-send-email-m-karicheri2@ti.com> <54F5F59C.5000603@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-pci-owner@vger.kernel.org To: Bjorn Helgaas Cc: linux-arm , "linux-kernel@vger.kernel.org" , "open list:INTEL IOMMU (VT-d)" , "devicetree@vger.kernel.org" , Joerg Roedel , Grant Likely , Rob Herring , Russell King , Arnd Bergmann , "linux-pci@vger.kernel.org" List-Id: devicetree@vger.kernel.org On 03/03/2015 03:53 PM, Bjorn Helgaas wrote: > [+cc linux-pci] > > On Tue, Mar 3, 2015 at 11:55 AM, Murali Karicheri wrote: >> On 03/02/2015 10:43 PM, Bjorn Helgaas wrote: >>> >>> On Mon, Mar 2, 2015 at 3:59 PM, Murali Karicheri >>> wrote: >>>> >>>> Move of_dma_configure() to device.c so it can be re-used for PCI devices >>>> to >>>> obtain DMA configuration from DT. Also add a second argument so that for >>>> PCI, the DT node of root bus host bridge can be used to obtain the DMA >>>> configuration for the slave PCI device. >>>> >>>> Tested-by: Suravee Suthikulpanit (AMD >>>> Seattle) >>>> Signed-off-by: Murali Karicheri >>>> Signed-off-by: Bjorn Helgaas >>>> Reviewed-by: Catalin Marinas >>>> Acked-by: Will Deacon >>>> CC: Joerg Roedel >>>> CC: Grant Likely >>>> CC: Rob Herring >>>> CC: Russell King >>>> CC: Arnd Bergmann >>>> --- >>>> - Based on the existing patch applied to arm-pci/pci/iommu for pci next >>>> (Bjorn) >>>> - Fixed the build issue reported on ARCH=x86_64 >>> >>> >>> Hi Murali, >>> >>> Can you please repost the entire series with fixed patches? It's >>> easier for me to reapply the whole thing at once than it is to keep >>> track of and fiddle with individual patches. >>> >>> Bjorn >> >> Bjorn, >> >> Ok. I have just posted v8 of the series including all patches. > > Thanks, I put them on a pci/murali-v8 branch for now. I'm assuming > you want them to go through my tree. In the cover letter, you > mentioned the "arm-pci iommu branch", so if that means you want them > via an ARM tree instead of mine, just let me know. I assume the build > will be clean and I'll rename it back to pci/iommu. My bad. It should have beem pci/iommu. My remote was named arm-pci and hence the confusion. Please apply it to the pci/iommu branch. Thanks Murali > > Bjorn -- Murali Karicheri Linux Kernel, Texas Instruments