From mboxrd@z Thu Jan  1 00:00:00 1970
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Subject: Re: [PATCH 1/2] ASoC: Add driver for PROTO Audio CODEC (with a
 WM8731)
Date: Wed, 29 Aug 2018 18:33:19 +0300
Message-ID: <54d79485-81ef-763a-c896-c6ab3e33b5d1@microchip.com>
References: <20180829144727.13757-1-codrin.ciubotariu@microchip.com>
 <20180829144727.13757-2-codrin.ciubotariu@microchip.com>
 <20180829145355.GD27808@sirena.org.uk>
 <8f1ecff2-aab7-2a1d-a8d3-8d0062a8a9e0@microchip.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="windows-1252"; format=flowed
Content-Transfer-Encoding: 8bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <8f1ecff2-aab7-2a1d-a8d3-8d0062a8a9e0@microchip.com>
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
To: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org, robh+dt@kernel.org, alexandre.belloni@bootlin.com, nicolas.ferre@microchip.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, florian.meier@koalo.de, cristian.birsan@microchip.com
List-Id: devicetree@vger.kernel.org

On 29.08.2018 18:20, Codrin Ciubotariu wrote:
> On 29.08.2018 17:53, Mark Brown wrote:
>> On Wed, Aug 29, 2018 at 05:47:26PM +0300, Codrin Ciubotariu wrote:
>>
>>> +static const unsigned int wm8731_rates_12288000[] = {
>>> +    8000, 32000, 48000, 96000,
>>> +};
>>> +
>>> +static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 
>>> = {
>>> +    .list = wm8731_rates_12288000,
>>> +    .count = ARRAY_SIZE(wm8731_rates_12288000),
>>> +};
>>> +
>>> +static int snd_proto_startup(struct snd_pcm_substream *substream)
>>> +{
>>> +    /* Setup constraints, because there is a 12.288 MHz XTAL on the 
>>> board */
>>> +    snd_pcm_hw_constraint_list(substream->runtime, 0,
>>> +                   SNDRV_PCM_HW_PARAM_RATE,
>>> +                   &wm8731_constraints_12288000);
>>> +    return 0;
>>> +}
>>
>> This bit is better added to the CODEC driver since it'll apply to any
>> system where there's this clock rate (someone else could come in and add
>> other rates, no need to do that yourself though it'd be nice of course).
> 
> I could do it.

It looks like these constraints are already in the wm8731 driver. I will 
wait for more comments and then I will send a v2 without this part.

Thanks and best regards,
Codrin