From: Rabeeh Khoury <rabeeh-UBr1pzP51AyaMJb+Lgu22Q@public.gmane.org>
To: Russell King <rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: Re: [PATCH 2/2] ARM: dts: hummingboard: Setup pwm lines
Date: Mon, 23 Mar 2015 20:06:27 +0200 [thread overview]
Message-ID: <55105623.1010804@solid-run.com> (raw)
In-Reply-To: <E1YSWZL-0002Aw-B5-eh5Bv4kxaXIANfyc6IWni62ZND6+EDdj@public.gmane.org>
On 03/02/2015 10:03 PM, Russell King wrote:
> From: Rabeeh Khoury <rabeeh-UBr1pzP51AyaMJb+Lgu22Q@public.gmane.org>
>
> Setup pwm lines as follows -
> pwm1: In case HummingBoard base carrier; this pin drives through a serial
> capacitor the mono out of the audio jack.
> In case HummingBoard pro the this pad can be reached by wiring to
> C8 capacitors on the board.
> pwm2: Setup pwm2 on gpio-1 but leave the default function of the iopad as
> a gpio.
> The user can change the io pad mux in user space and therefore use
> this function on gpio-1 (pin number 7 on the 26 pin header).
> pwm3,pwm4: unused
>
> Signed-off-by: Rabeeh Khoury <rabeeh-UBr1pzP51AyaMJb+Lgu22Q@public.gmane.org>
> [tweaked alias for pwm pinctrl group --rmk]
> Signed-off-by: Russell King <rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
> ---
> For acks please.
Ack.
>
> arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
> index 93588c987d2c..c0dc5948fa3c 100644
> --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
> @@ -164,6 +164,10 @@
> >;
> };
>
> + pinctrl_hummingboard_pwm1: pwm1grp {
> + fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
> + };
> +
> pinctrl_hummingboard_spdif: hummingboard-spdif {
> fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
> };
> @@ -203,6 +207,25 @@
> };
> };
>
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
> + status = "okay";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&pwm3 {
> + status = "disabled";
> +};
> +
> +&pwm4 {
> + status = "disabled";
> +};
> +
> &spdif {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_hummingboard_spdif>;
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2015-03-23 18:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-02 20:03 [PATCH 2/2] ARM: dts: hummingboard: Setup pwm lines Russell King
[not found] ` <E1YSWZL-0002Aw-B5-eh5Bv4kxaXIANfyc6IWni62ZND6+EDdj@public.gmane.org>
2015-03-03 10:42 ` Philipp Zabel
[not found] ` <1425379336.3146.38.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-03-09 15:40 ` Russell King - ARM Linux
[not found] ` <20150309154004.GR8656-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2015-03-09 16:39 ` Philipp Zabel
2015-03-30 3:54 ` Shawn Guo
2015-03-23 18:06 ` Rabeeh Khoury [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55105623.1010804@solid-run.com \
--to=rabeeh-ubr1pzp51ayamjb+lgu22q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).