From mboxrd@z Thu Jan  1 00:00:00 1970
From: Varka Bhadram <varkabhadram@gmail.com>
Subject: Re: [PATCH v4 2/3] leds: ktd2692: add device tree bindings for ktd2692
Date: Wed, 25 Mar 2015 09:01:55 +0530
Message-ID: <55122C2B.6010603@gmail.com>
References: <1427247044-3748-1-git-send-email-ingi2.kim@samsung.com> <1427247044-3748-3-git-send-email-ingi2.kim@samsung.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1427247044-3748-3-git-send-email-ingi2.kim@samsung.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Ingi Kim <ingi2.kim@samsung.com>, cooloney@gmail.com, rpurdie@rpsys.net, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org
Cc: sakari.ailus@iki.fi, j.anaszewski@samsung.com, sw0312.kim@samsung.com, cw00.choi@samsung.com, jh80.chung@samsung.com, ideal.song@samsung.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On 03/25/2015 07:00 AM, Ingi Kim wrote:
> This patch adds the device tree bindings for ktd2692 flash LEDs.
> Add optional properties 'flash-timeout-us' to control flash timeout
> and 'vin-supply' for flash-led regulator
>
> Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
> ---
>   .../devicetree/bindings/leds/leds-ktd2692.txt      | 33 ++++++++++++++++++++++
>   1 file changed, 33 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
> new file mode 100644
> index 0000000..f78512f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
> @@ -0,0 +1,33 @@
> +* Kinetic Technologies - KTD2692 Flash LED Driver
> +
> +KTD2692 is the ideal power solution for high-power flash LEDs.
> +It uses ExpressWire single-wire programming for maximum flexibility.
> +
> +The ExpressWire interface through CTRL pin can control LED on/off and
> +enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
> +Flash timeout, LVP(low voltage protection).
> +
> +Also, When the AUX pin is pulled high while CTRL pin is high,
> +LED current will be ramped up to the flash-mode current level.
> +
> +Required properties:
> +	- compatible: "kinetic,ktd2692"
> +	- ctrl-gpio, aux-gpio : gpio pins in order control ktd2692 flash led.
> +		There is an internal 300kOhm pull-down resistor at each pin
> +	- vin-supply : "vin" LED supply (2.7V to 5.5V)
> +		See Documentation/devicetree/bindings/regulator/regulator.txt
> +

Above bindings are not that readable to me. Remove the tab spaces before properties.

> +Optional property:
> +	- flash-timeout-us : Maximum flash timeout in microseconds.
> +			flash timeout ranges from 0 to 1835000us and
> +			default is 1049000us.
> +
> +Example:
> +
> +flash-led {
> +	compatible = "kinetic,ktd2692";
> +	ctrl-gpio = <&gpc0 1 0>;
> +	aux-gpio = <&gpc0 2 0>;
> +	flash-timeout-us = <1835000>;
> +	vin-supply = <&vbat>;
> +};


-- 
Varka Bhadram