From: Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
To: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Wei Xu <xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>,
Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"Liguozhu (Kenneth)"
<liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Subject: Re: [RESEND PATCH v3] mtd: hisilicon: add device tree node for NAND controller
Date: Thu, 26 Mar 2015 12:53:57 +0800 [thread overview]
Message-ID: <551390E5.2090209@hisilicon.com> (raw)
In-Reply-To: <CAD6h2NQr_Z600vC+7RRuLgoGvV4MCXz8TAd4C5eCnqbA0ZdPWw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On 2015/3/26 10:13, Haojian Zhuang wrote:
> On 25 March 2015 at 15:04, Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> wrote:
>> This patch adds dts support for NAND flash controller of Hisilicon Soc Hip04.
>> Now it is based on v4.0-rc5
>>
>> Changes in v3:
>> - Change E-mail address in signed-off-by to "wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org"
>> Changes in v2:
>> - Base on v3.19-rc1
>> - Use nand-ecc-strength, nand-ecc-step-size to replace hisi,nand-ecc-bits
>> Changes in v1:
>> - Move partition and other board related information into board dts file:
>> hip04-d01.dts
>>
>> Signed-off-by: Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
>> ---
>> arch/arm/boot/dts/hip04-d01.dts | 27 +++++++++++++++++++++++++++
>> arch/arm/boot/dts/hip04.dtsi | 7 +++++++
>> 2 files changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
>> index 40a9e33..ba04dd5 100644
>> --- a/arch/arm/boot/dts/hip04-d01.dts
>> +++ b/arch/arm/boot/dts/hip04-d01.dts
>> @@ -28,5 +28,32 @@
>> uart0: uart@4007000 {
>> status = "ok";
>> };
>> +
>> + nand: nand@4020000 {
>> + nand-bus-width = <8>;
>> + nand-ecc-mode = "hw";
>> + nand-ecc-strength = <16>;
>> + nand-ecc-step-size = <1024>;
>> +
>> + partition@0 {
>> + label = "nand_text";
>> + reg = <0x00000000 0x00400000>;
>> + };
>> +
>> + partition@00400000 {
>> + label = "nand_monitor";
>> + reg = <0x00400000 0x00400000>;
>> + };
>> +
>> + partition@00800000 {
>> + label = "nand_kernel";
>> + reg = <0x00800000 0x00800000>;
>> + };
>> +
>> + partition@01000000 {
>> + label = "nand_fs";
>> + reg = <0x01000000 0x1f000000>;
>> + };
>> + };
>> };
>> };
>> diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
>> index 2388145..ac32fce 100644
>> --- a/arch/arm/boot/dts/hip04.dtsi
>> +++ b/arch/arm/boot/dts/hip04.dtsi
>> @@ -269,6 +269,13 @@
>> interrupts = <0 372 4>;
>> };
>>
>> + nand: nand@4020000 {
>> + compatible = "hisilicon,504-nfc";
>> + reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
>> + interrupts = <0 379 4>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + };
>> };
>>
>> etb@0,e3c42000 {
>> --
>> 1.9.1
>>
>
> Acked-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>
> .
>
Thanks!
Zhou Wang
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-03-26 4:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-25 7:04 [RESEND PATCH v3] mtd: hisilicon: add device tree node for NAND controller Zhou Wang
[not found] ` <1427267091-227474-1-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-03-26 2:13 ` Haojian Zhuang
[not found] ` <CAD6h2NQr_Z600vC+7RRuLgoGvV4MCXz8TAd4C5eCnqbA0ZdPWw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-26 4:53 ` Zhou Wang [this message]
2015-03-27 17:35 ` Brian Norris
2015-03-28 7:00 ` Zhou Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=551390E5.2090209@hisilicon.com \
--to=wangzhou1-c8/m+/jpzteamjb+lgu22q@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).