From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
Jens Kuske <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH 2/5] ARM: dts: sun4i: Add A10 SRAM and SRAM controller
Date: Thu, 26 Mar 2015 15:42:31 +0100 [thread overview]
Message-ID: <55141AD7.1040701@redhat.com> (raw)
In-Reply-To: <20150324152034.GB4951@lukather>
Hi,
On 24-03-15 16:20, Maxime Ripard wrote:
> On Fri, Mar 20, 2015 at 07:52:46PM +0100, Hans de Goede wrote:
>> The A10 has a few SRAM that can be mapped either to a device or to the CPU,
>> with the mapping being controlled by a SRAM controller.
>>
>> Since most of the time these SRAM won't be accessible by the CPU,
>> we can't use the mmio-sram driver and compatible.
>>
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> ---
>> arch/arm/boot/dts/sun4i-a10.dtsi | 34 ++++++++++++++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
>> index b66ebb3..88f57b4 100644
>> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
>> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
>> @@ -451,12 +451,46 @@
>> };
>> };
>>
>> + /*
>> + * Note we use the address were mmio registers start, not where the
> ^ where
>
Fixed in patches 2 to 4.
Regards,
Hans
>> + * SRAM blocks start, this cannot be changed because that would be
>> + * a devicetree ABI change.
>> + */
>> soc@01c00000 {
>> compatible = "simple-bus";
>> #address-cells = <1>;
>> #size-cells = <1>;
>> ranges;
>>
>> + sram@00000000 {
>> + compatible = "allwinner,sun4i-a10-sram";
>> + reg = <0x00000000 0x4000>;
>> + allwinner,sram-name = "A1";
>> + };
>> +
>> + sram@00004000 {
>> + compatible = "allwinner,sun4i-a10-sram";
>> + reg = <0x00004000 0x4000>;
>> + allwinner,sram-name = "A2";
>> + };
>> +
>> + sram@00008000 {
>> + compatible = "allwinner,sun4i-a10-sram";
>> + reg = <0x00008000 0x4000>;
>> + allwinner,sram-name = "A3-A4";
>> + };
>> +
>> + sram@00010000 {
>> + compatible = "allwinner,sun4i-a10-sram";
>> + reg = <0x00010000 0x1000>;
>> + allwinner,sram-name = "D";
>> + };
>> +
>> + sram-controller@01c00000 {
>> + compatible = "allwinner,sun4i-a10-sram-controller";
>> + reg = <0x01c00000 0x30>;
>> + };
>> +
>> dma: dma-controller@01c02000 {
>> compatible = "allwinner,sun4i-a10-dma";
>> reg = <0x01c02000 0x1000>;
>> --
>> 2.3.3
>>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-03-26 14:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-20 18:52 [PATCH 0/5] ARM: sunxi: SRAM mapping support Hans de Goede
[not found] ` <1426877569-11493-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-20 18:52 ` [PATCH 1/5] drivers: soc: sunxi: Introduce SoC driver to map SRAMs Hans de Goede
[not found] ` <1426877569-11493-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-24 15:19 ` Maxime Ripard
2015-03-26 14:37 ` Hans de Goede
2015-03-20 18:52 ` [PATCH 2/5] ARM: dts: sun4i: Add A10 SRAM and SRAM controller Hans de Goede
[not found] ` <1426877569-11493-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-24 15:20 ` Maxime Ripard
2015-03-26 14:42 ` Hans de Goede [this message]
2015-03-20 18:52 ` [PATCH 3/5] ARM: dts: sun5i: Add A13 and A10s " Hans de Goede
2015-03-20 18:52 ` [PATCH 4/5] ARM: dts: sun7i: Add A20 " Hans de Goede
2015-03-20 18:52 ` [PATCH 5/5] net: allwinner: emac: Claim our SRAM Hans de Goede
[not found] ` <1426877569-11493-6-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-20 18:53 ` Hans de Goede
2015-03-24 15:22 ` Maxime Ripard
2015-03-26 14:44 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55141AD7.1040701@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).