From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jacek Anaszewski Subject: Re: [PATCH v4 04/12] DT: Add documentation for the mfd Maxim max77693 Date: Tue, 31 Mar 2015 16:34:17 +0200 Message-ID: <551AB069.3010705@samsung.com> References: <1427809965-25540-1-git-send-email-j.anaszewski@samsung.com> <1427809965-25540-5-git-send-email-j.anaszewski@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-reply-to: <1427809965-25540-5-git-send-email-j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Jacek Anaszewski Cc: linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, pavel-+ZI9xUNit7I@public.gmane.org, cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org, sakari.ailus-X3B1VOXEql0@public.gmane.org, s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, Andrzej Hajda , Lee Jones , Chanwoo Choi , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org I've just pushed PATCH v5 - it adds more precise description of current settings constraints. On 03/31/2015 03:52 PM, Jacek Anaszewski wrote: > This patch adds device tree binding documentation for > the flash cell of the Maxim max77693 multifunctional device. > > Signed-off-by: Jacek Anaszewski > Signed-off-by: Andrzej Hajda > Acked-by: Kyungmin Park > Cc: Lee Jones > Cc: Chanwoo Choi > Cc: Bryan Wu > Cc: Richard Purdie > Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > --- > Documentation/devicetree/bindings/mfd/max77693.txt | 61 ++++++++++++++++++++ > 1 file changed, 61 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt > index 38e6440..deb832f 100644 > --- a/Documentation/devicetree/bindings/mfd/max77693.txt > +++ b/Documentation/devicetree/bindings/mfd/max77693.txt > @@ -76,7 +76,54 @@ Optional properties: > Valid values: 4300000, 4700000, 4800000, 4900000 > Default: 4300000 > > +- led : the LED submodule device node > + > +There are two LED outputs available - FLED1 and FLED2. Each of them can > +control a separate LED or they can be connected together to double > +the maximum current for a single connected LED. One LED is represented > +by one child node. > + > +Required properties: > +- compatible : Must be "maxim,max77693-led". > + > +Optional properties: > +- maxim,boost-mode : > + In boost mode the device can produce up to 1.2A of total current > + on both outputs. The maximum current on each output is reduced > + to 625mA then. If not enabled explicitly, boost setting defaults to > + LEDS_BOOST_FIXED in case both current sources are used. > + Possible values: > + LEDS_BOOST_OFF (0) - no boost, > + LEDS_BOOST_ADAPTIVE (1) - adaptive mode, > + LEDS_BOOST_FIXED (2) - fixed mode. > +- maxim,boost-mvout : Output voltage of the boost module in millivolts. > + Valid values: 3300 - 5500, step by 25 (rounded down) > + Default: 3300 > +- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired > + if chip estimates that system voltage could drop below this level due > + to flash power consumption. > + Valid values: 2400 - 3400, step by 33 (rounded down) > + Default: 2400 > + > +Required properties of the LED child node: > +- led-sources : see Documentation/devicetree/bindings/leds/common.txt; > + device current output identifiers: 0 - FLED1, 1 - FLED2 > + > +Optional properties of the LED child node: > +- label : see Documentation/devicetree/bindings/leds/common.txt > +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt > + Valid values: 15625 - 250000, step by 15625 (rounded down) > + Default: 250000 > +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt > + Valid values: 15625 - 1000000, step by 15625 (rounded down) > + Default: 1000000 when boost mode is off and 625000 otherwise > +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt > + Valid values: 62500 - 1000000, step by 62500 (rounded down) > + Default: 1000000 > + > Example: > +#include > + > max77693@66 { > compatible = "maxim,max77693"; > reg = <0x66>; > @@ -117,5 +164,19 @@ Example: > maxim,thermal-regulation-celsius = <75>; > maxim,battery-overcurrent-microamp = <3000000>; > maxim,charge-input-threshold-microvolt = <4300000>; > + > + led { > + compatible = "maxim,max77693-led"; > + maxim,boost-mode = ; > + maxim,boost-mvout = <5000>; > + maxim,mvsys-min = <2400>; > + > + camera_flash: flash-led { > + label = "max77693-flash"; > + led-sources = <0>, <1>; > + max-microamp = <500000>; > + flash-max-microamp = <1250000>; > + flash-timeout-us = <1000000>; > + }; > }; > }; > -- Best Regards, Jacek Anaszewski -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html