From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marcel Holtmann Subject: Re: [RESEND PATCH 0/5] Add bluetooth support for Orange Pi 3 Date: Fri, 30 Aug 2019 09:53:16 +0200 Message-ID: <5524D5E9-FA82-4244-A91F-78CF1C3FB3FB@holtmann.org> References: <20190823103139.17687-1-megous@megous.com> Mime-Version: 1.0 (Mac OS X Mail 12.4 \(3445.104.11\)) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190823103139.17687-1-megous@megous.com> Sender: linux-kernel-owner@vger.kernel.org To: megous@megous.com Cc: Maxime Ripard , Chen-Yu Tsai , Rob Herring , Johan Hedberg , Mark Rutland , "David S. Miller" , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-bluetooth@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi Ondrej, > (Resend to add missing lists, sorry for the noise.) > > This series implements bluetooth support for Xunlong Orange Pi 3 board. > > The board uses AP6256 WiFi/BT 5.0 chip. > > Summary of changes: > > - add more delay to let initialize the chip > - let the kernel detect firmware file path > - add new compatible and update dt-bindings > - update Orange Pi 3 / H6 DTS > > Please take a look. > > thank you and regards, > Ondrej Jirman > > Ondrej Jirman (5): > dt-bindings: net: Add compatible for BCM4345C5 bluetooth device > bluetooth: bcm: Add support for loading firmware for BCM4345C5 > bluetooth: hci_bcm: Give more time to come out of reset > arm64: dts: allwinner: h6: Add pin configs for uart1 > arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth > > .../bindings/net/broadcom-bluetooth.txt | 1 + > .../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++ > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++ > drivers/bluetooth/btbcm.c | 3 +++ > drivers/bluetooth/hci_bcm.c | 3 ++- > 5 files changed, 35 insertions(+), 1 deletion(-) all 5 patches have been applied to bluetooth-next tree. Regards Marcel