From mboxrd@z Thu Jan 1 00:00:00 1970 From: Varka Bhadram Subject: Re: [PATCH v6 0/3] Add ktd2692 Flash LED driver using LED Flash class Date: Fri, 10 Apr 2015 12:29:24 +0530 Message-ID: <552774CC.4040201@gmail.com> References: <1428648359-23289-1-git-send-email-ingi2.kim@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1428648359-23289-1-git-send-email-ingi2.kim@samsung.com> Sender: linux-leds-owner@vger.kernel.org To: Ingi Kim , cooloney@gmail.com, rpurdie@rpsys.net, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org Cc: sakari.ailus@iki.fi, j.anaszewski@samsung.com, joe@perches.com, sw0312.kim@samsung.com, cw00.choi@samsung.com, jh80.chung@samsung.com, ideal.song@samsung.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org List-Id: devicetree@vger.kernel.org On 04/10/2015 12:15 PM, Ingi Kim wrote: > This patch adds ktd2692 Flash LED driver with LED Flash class > > Change in v6: > - Change goto label to if-else > - Change DT binding style for LED device binding > > Change in v5: > - Clean up the code > - Fix help message of Kconfig > - Fix issue related with regulator and mutex usage > - Remove tab spaces in bindings > > Change in v4: > - Clean up the code > - Modify binding documentation of ktd2692 > > Change in v3: > - Clean up the code > - Add aux gpio pin to control Flash LED > > Change in v2: > - Introduction of LED Flash class as Jacek's comment > - Supplement of binding documentation > - Rename gpio control pin and remove unused pin > - Add regulator for the Flash LED > > Ingi Kim (3): > of: Add vendor prefix for Kinetic technologies > leds: ktd2692: add device tree bindings for ktd2692 > leds: Add ktd2692 flash LED driver > > .../devicetree/bindings/leds/leds-ktd2692.txt | 40 ++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/leds/Kconfig | 9 + > drivers/leds/Makefile | 1 + > drivers/leds/leds-ktd2692.c | 408 +++++++++++++++++++++ > 5 files changed, 459 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt > create mode 100644 drivers/leds/leds-ktd2692.c > Run checkpatch.pl with --strict option on this series.. ./scripts/checkpatch.pl --strict 000* Reported "CHECK: Alignment should match open parenthesis".. -- Varka Bhadram