Re: [PATCH v2 05/12] ARM: dts: apq8064: Add SATA controller support.

[Srinivas Kandagatla <srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

On 10/04/15 18:24, Stephen Boyd wrote:
> On 04/10/15 05:34, Srinivas Kandagatla wrote:
>> This patch adds AHCI based SATA controller support to APQ8064.
>> Tested on IFC6410 board.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> ---
>>   arch/arm/boot/dts/qcom-apq8064-ifc6410.dts |  9 ++++++++
>>   arch/arm/boot/dts/qcom-apq8064.dtsi        | 35 ++++++++++++++++++++++++++++++
>>   2 files changed, 44 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
>> index 122bf34..c9c9c5e 100644
>> --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
>> +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
>> @@ -116,6 +116,15 @@
>>   			};
>>   		};
>>
>> +		sata_phy0: sata-phy@1b400000{
>
> Space before '{' please.
Yeo, Will fix it in next version.
>
>> +			status = "okay";
>> +		};
>> +
>> +		sata0: sata@29000000 {
>> +			status		= "okay";
>> +			target-supply	= <&pm8921_s4>;
>> +		};
>> +
>>   		/* OTG */
>>   		usb1_phy: phy@12500000 {
>>   			status		= "okay";
>> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
>> index 5aac9a5..56cc65e 100644
>> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
>> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
>> @@ -379,6 +379,41 @@
>>   			usb-phy		= <&usb4_phy>;
>>   		};
>>
>> +		sata_phy0: sata-phy@1b400000{
>
> Space before '{' please. Also I wonder if it should just be called
> phy@1b400000 because phy is more standard than sata-phy.
Make sense, I will fix it in next version.

>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html