Re: [PATCH iio] imu: inv_mpu6050: adds device tree bindings

[Varka Bhadram <varkabhadram-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On 04/24/2015 02:53 PM, Varka Bhadram wrote:

> Signed-off-by: Varka Bhadram <varkab-If5XQcfNmg0@public.gmane.org>
> ---
>  .../devicetree/bindings/iio/imu/inv_mpu6050.txt    |   17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> new file mode 100644
> index 0000000..e4d8f1c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> @@ -0,0 +1,17 @@
> +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
> +
> +http://www.invensense.com/mems/gyro/mpu6050.html
> +
> +Required properties:
> + - compatible : should be "invensense,mpu6050"
> + - reg : the I2C address of the sensor
> + - interrupt-parent : should be the phandle for the interrupt controller
> + - interrupts : interrupt mapping for GPIO IRQ
> +
> +Example:
> +	mpu6050@68 {
> +		compatible = "invensense,mpu6050";
> +		reg = <0x68>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <18 1>;
> +	};

Ping..?

-- 
Varka Bhadram