[PATCH iio] imu: inv_mpu6050: adds device tree bindings

[PATCH iio] imu: inv_mpu6050: adds device tree bindings

[Varka Bhadram]

Signed-off-by: Varka Bhadram <varkab-If5XQcfNmg0@public.gmane.org>
---
 .../devicetree/bindings/iio/imu/inv_mpu6050.txt    |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt

diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
new file mode 100644
index 0000000..e4d8f1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
@@ -0,0 +1,17 @@
+InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
+
+http://www.invensense.com/mems/gyro/mpu6050.html
+
+Required properties:
+ - compatible : should be "invensense,mpu6050"
+ - reg : the I2C address of the sensor
+ - interrupt-parent : should be the phandle for the interrupt controller
+ - interrupts : interrupt mapping for GPIO IRQ
+
+Example:
+	mpu6050@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 1>;
+	};
-- 
1.7.9.5

Re: [PATCH iio] imu: inv_mpu6050: adds device tree bindings

[Varka Bhadram]

On 04/24/2015 02:53 PM, Varka Bhadram wrote:

> Signed-off-by: Varka Bhadram <varkab-If5XQcfNmg0@public.gmane.org>
> ---
>  .../devicetree/bindings/iio/imu/inv_mpu6050.txt    |   17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> new file mode 100644
> index 0000000..e4d8f1c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> @@ -0,0 +1,17 @@
> +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
> +
> +http://www.invensense.com/mems/gyro/mpu6050.html
> +
> +Required properties:
> + - compatible : should be "invensense,mpu6050"
> + - reg : the I2C address of the sensor
> + - interrupt-parent : should be the phandle for the interrupt controller
> + - interrupts : interrupt mapping for GPIO IRQ
> +
> +Example:
> +	mpu6050@68 {
> +		compatible = "invensense,mpu6050";
> +		reg = <0x68>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <18 1>;
> +	};

Ping..?

-- 
Varka Bhadram

Re: [PATCH iio] imu: inv_mpu6050: adds device tree bindings

[Jonathan Cameron]

On 28 April 2015 04:31:06 BST, Varka Bhadram <varkabhadram-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>On 04/24/2015 02:53 PM, Varka Bhadram wrote:
>
>> Signed-off-by: Varka Bhadram <varkab-If5XQcfNmg0@public.gmane.org>
>> ---
>>  .../devicetree/bindings/iio/imu/inv_mpu6050.txt    |   17
>+++++++++++++++++
>>  1 file changed, 17 insertions(+)
>>  create mode 100644
>Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>>
>> diff --git
>a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>> new file mode 100644
>> index 0000000..e4d8f1c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
>> @@ -0,0 +1,17 @@
>> +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS
>MotionTracking Device
>> +
>> +http://www.invensense.com/mems/gyro/mpu6050.html
>> +
>> +Required properties:
>> + - compatible : should be "invensense,mpu6050"
>> + - reg : the I2C address of the sensor
>> + - interrupt-parent : should be the phandle for the interrupt
>controller
>> + - interrupts : interrupt mapping for GPIO IRQ
>> +
>> +Example:
>> +	mpu6050@68 {
>> +		compatible = "invensense,mpu6050";
>> +		reg = <0x68>;
>> +		interrupt-parent = <&gpio1>;
>> +		interrupts = <18 1>;
>> +	};
>
>Ping..?

Device tree bindings. Either need a device tree back or 3 weeks to pass before I can
 take them. Looks fine to me! Could cross ref the interrupts binding doc....

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

Re: [PATCH iio] imu: inv_mpu6050: adds device tree bindings

[Jonathan Cameron]

On 24/04/15 05:23, Varka Bhadram wrote:
> Signed-off-by: Varka Bhadram <varkab-If5XQcfNmg0@public.gmane.org>
Applied to the togreg branch of iio.git. Will be initially pushed
out as testing for the autobuilders to play with it.

Thanks,

Jonathan
> ---
>  .../devicetree/bindings/iio/imu/inv_mpu6050.txt    |   17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> new file mode 100644
> index 0000000..e4d8f1c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> @@ -0,0 +1,17 @@
> +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
> +
> +http://www.invensense.com/mems/gyro/mpu6050.html
> +
> +Required properties:
> + - compatible : should be "invensense,mpu6050"
> + - reg : the I2C address of the sensor
> + - interrupt-parent : should be the phandle for the interrupt controller
> + - interrupts : interrupt mapping for GPIO IRQ
> +
> +Example:
> +	mpu6050@68 {
> +		compatible = "invensense,mpu6050";
> +		reg = <0x68>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <18 1>;
> +	};
>