Re: [PATCH v3 2/3] Phy: DT binding documentation for Broadcom Cygnus USB PHY driver

[Arun Ramamurthy <arun.ramamurthy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>]

Hi

On 15-05-11 07:11 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Thursday 23 April 2015 04:44 AM, Arun Ramamurthy wrote:
>> Broadcom's Cygnus chip has a USB 2.0 host controller connected to
>> three separate phys. One of the phs (port 2) is also connectd to
>> a usb 2.0 device controller
>>
>> Signed-off-by: Arun Ramamurthy <arun.ramamurthy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> Reviewed-by: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> Reviewed-by: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> ---
>>   .../bindings/phy/brcm,cygnus-usb-phy.txt           | 69
>> ++++++++++++++++++++++
>>   include/dt-bindings/phy/phy.h                      |  2 +
>>   2 files changed, 71 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
>>
>> diff --git
>> a/Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
>> b/Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
>> new file mode 100644
>> index 0000000..ec62044
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
>> @@ -0,0 +1,69 @@
>> +BROADCOM CYGNUS USB PHY
>> +
>> +Required Properties:
>> +    - compatible:  brcm,cygnus-usb-phy
>> +    - reg : usbphy_regs - Base address of phy registers
>> +            usb2h_idm_regs - Base address of host idm registers
>> +            usb2d_idm_regs - Base address of device idm registers
>> +    - phy-cells - must be 1 for each port declared. The node
>> +              that uses the phy must provide either PHY_CONFIG_DEVICE
>> for device
>> +              or PHY_CONFIG_HOST for host
>> +
>> +NOTE: port 0 and port 1 are host only and port 2 can be configured
>> for host or
>> +device.
>> +
>> +Example of phy :
>> +    usbphy0: usbphy@0x0301c000 {
>> +        compatible = "brcm,cygnus-usb-phy";
>> +        reg = <0x0301c000 0x2000>,
>> +              <0x18115000 0x1000>,
>> +              <0x18111000 0x1000>;
>> +        status = "okay";
>> +
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +        usbphy0_0: usbphy0@0 {
>> +            #phy-cells = <1>;
>> +            reg = <0>;
>> +            status = "okay";
>> +            phy-supply = <&vbus_p0>;
>> +        };
>> +
>> +        usbphy0_1: usbphy0@1 {
>> +            #phy-cells = <1>;
>> +            reg = <1>;
>> +            status = "okay";
>> +        };
>> +
>> +        usbphy0_2: usbphy0@2 {
>> +            #phy-cells = <1>;
>> +            reg = <2>;
>> +            status = "okay";
>> +            phy-supply = <&vbus_p2>;
>> +        };
>> +    };
>> +
>> +Example of node using the phy:
>> +
>> +    /* This nodes declares all three ports as host */
>> +
>> +    ehci0: usb@0x18048000 {
>> +        compatible = "generic-ehci";
>> +        reg = <0x18048000 0x100>;
>> +        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
>> +        phys = <&usbphy0_0 PHY_CONFIG_HOST &usbphy0_1 PHY_CONFIG_HOST
>> &usbphy0_2 PHY_CONFIG_HOST>;
>> +        status = "okay";
>> +    };
>> +
>> +    /*
>> +     * This node declares port 2 phy
>> +     * and configures it for device
>> +     */
>> +
>> +    usbd_udc_dwc1: usbd_udc_dwc@0x1804c000 {
>> +        compatible = "iproc-udc";
>> +        reg = <0x1804c000 0x2000>;
>> +        interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
>> +        phys = <&usbphy0_2 PHY_CONFIG_DEVICE>;
>> +        phy-names = "usb";
>> +    };
>> diff --git a/include/dt-bindings/phy/phy.h
>> b/include/dt-bindings/phy/phy.h
>> index 6c90193..3f6b1ac 100644
>> --- a/include/dt-bindings/phy/phy.h
>> +++ b/include/dt-bindings/phy/phy.h
>> @@ -15,5 +15,7 @@
>>   #define PHY_TYPE_PCIE        2
>>   #define PHY_TYPE_USB2        3
>>   #define PHY_TYPE_USB3        4
>> +#define PHY_CONFIG_HOST        1
>> +#define PHY_CONFIG_DEVICE    0
>
> '0' and '1' are already defined for "PHY_NONE" and "PHY_TYPE_SATA". Is
> this for USB2 or for USB3?
>
This is for USB2, do you want me to prefix the defines with USB2?
I think It would be misleading to use PHY_TYPE_SATA or PHY_NONE in this 
scenario
> Thanks
> Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html