[PATCH 0/2] USB OTG PHY driver for NXP LPC18xx family

[PATCH 0/2] USB OTG PHY driver for NXP LPC18xx family

[Joachim Eastwood]

This patch set adds support for the internal USB OTG PHY found
on NXP LPC18xx and LPC43xx devices. Driver takes care of
enabling the PHY and setting the clock rate which is need for
USB0 support on this platform.

Base support for this platform can now be found in arm-soc next.

Joachim Eastwood (2):
  phy: add lpc18xx usb otg phy driver
  doc: dt: add documentation for nxp,lpc1850-usb-otg-phy

 .../bindings/phy/nxp,lpc1850-usb-otg-phy.txt       |  19 +++
 drivers/phy/Kconfig                                |  11 ++
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-lpc18xx-usb-otg.c                  | 145 +++++++++++++++++++++
 4 files changed, 176 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt
 create mode 100644 drivers/phy/phy-lpc18xx-usb-otg.c

-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] phy: add lpc18xx usb otg phy driver

[Joachim Eastwood]

Add PHY driver for the internal USB OTG PHY found on NXP
LPC18xx and LPC43xx devices. This driver takes care of
enabling the PHY in CREG (syscon) and setting the required
clock frequency.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/phy/Kconfig               |  11 +++
 drivers/phy/Makefile              |   1 +
 drivers/phy/phy-lpc18xx-usb-otg.c | 145 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 157 insertions(+)
 create mode 100644 drivers/phy/phy-lpc18xx-usb-otg.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a53bd5b52df9..e11fb9e3c760 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -52,6 +52,17 @@ config PHY_EXYNOS_MIPI_VIDEO
 	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
 	  and EXYNOS SoCs.
 
+config PHY_LPC18XX_USB_OTG
+	tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
+	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
+
+	  This driver is need for USB0 support on LPC18xx/43xx and takes
+	  care of enabling and clock setup.
+
 config PHY_MVEBU_SATA
 	def_bool y
 	depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f12625178780..b7251f3b9ef7 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
 obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o
 obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
 obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
 obj-$(CONFIG_PHY_MIPHY28LP) 		+= phy-miphy28lp.o
 obj-$(CONFIG_PHY_MIPHY365X)		+= phy-miphy365x.o
diff --git a/drivers/phy/phy-lpc18xx-usb-otg.c b/drivers/phy/phy-lpc18xx-usb-otg.c
new file mode 100644
index 000000000000..3a86e8f75e7e
--- /dev/null
+++ b/drivers/phy/phy-lpc18xx-usb-otg.c
@@ -0,0 +1,145 @@
+/*
+ * PHY driver for NXP LPC18xx/43xx internal USB OTG PHY
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* USB OTG PHY register offset and bit in CREG */
+#define LPC18XX_CREG_CREG0		0x004
+# define LPC18XX_CREG_CREG0_USB0PHY	BIT(5)
+
+struct lpc18xx_usb_otg_phy {
+	struct phy *phy;
+	struct clk *clk;
+	struct regmap *reg;
+};
+
+static int lpc18xx_usb_otg_phy_init(struct phy *phy)
+{
+	struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare(lpc->clk);
+	if (ret)
+		return ret;
+
+	/* The PHY must be clocked at 480 MHz */
+	return clk_set_rate(lpc->clk, 480000000);
+}
+
+static int lpc18xx_usb_otg_phy_exit(struct phy *phy)
+{
+	struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
+
+	clk_unprepare(lpc->clk);
+
+	return 0;
+}
+
+static int lpc18xx_usb_otg_phy_power_on(struct phy *phy)
+{
+	struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_enable(lpc->clk);
+	if (ret)
+		return ret;
+
+	/* The bit in CREG is cleared to enable the PHY */
+	return regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
+				  LPC18XX_CREG_CREG0_USB0PHY, 0);
+}
+
+static int lpc18xx_usb_otg_phy_power_off(struct phy *phy)
+{
+	struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
+				 LPC18XX_CREG_CREG0_USB0PHY,
+				 LPC18XX_CREG_CREG0_USB0PHY);
+	if (ret)
+		return ret;
+
+	clk_disable(lpc->clk);
+
+	return 0;
+}
+
+static const struct phy_ops lpc18xx_usb_otg_phy_ops = {
+	.init		= lpc18xx_usb_otg_phy_init,
+	.exit		= lpc18xx_usb_otg_phy_exit,
+	.power_on	= lpc18xx_usb_otg_phy_power_on,
+	.power_off	= lpc18xx_usb_otg_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int lpc18xx_usb_otg_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct lpc18xx_usb_otg_phy *lpc;
+
+	lpc = devm_kzalloc(&pdev->dev, sizeof(*lpc), GFP_KERNEL);
+	if (!lpc)
+		return -ENOMEM;
+
+	lpc->reg = syscon_regmap_lookup_by_compatible("nxp,lpc1850-creg");
+	if (IS_ERR(lpc->reg)) {
+		dev_err(&pdev->dev, "failed to get syscon\n");
+		return PTR_ERR(lpc->reg);
+	}
+
+	lpc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lpc->clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(lpc->clk);
+	}
+
+	lpc->phy = devm_phy_create(&pdev->dev, NULL, &lpc18xx_usb_otg_phy_ops);
+	if (IS_ERR(lpc->phy)) {
+		dev_err(&pdev->dev, "failed to create PHY\n");
+		return PTR_ERR(lpc->phy);
+	}
+
+	phy_set_drvdata(lpc->phy, lpc);
+
+	phy_provider = devm_of_phy_provider_register(&pdev->dev,
+						     of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	return 0;
+}
+
+static const struct of_device_id lpc18xx_usb_otg_phy_match[] = {
+	{ .compatible = "nxp,lpc1850-usb-otg-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_usb_otg_phy_match);
+
+static struct platform_driver lpc18xx_usb_otg_phy_driver = {
+	.probe		= lpc18xx_usb_otg_phy_probe,
+	.driver		= {
+		.name	= "lpc18xx-usb-otg-phy",
+		.of_match_table = lpc18xx_usb_otg_phy_match,
+	},
+};
+module_platform_driver(lpc18xx_usb_otg_phy_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
+MODULE_DESCRIPTION("NXP LPC18xx/43xx USB OTG PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] phy: add lpc18xx usb otg phy driver

[Kishon Vijay Abraham I]

Hi,

On Saturday 16 May 2015 10:57 PM, Joachim Eastwood wrote:
> Add PHY driver for the internal USB OTG PHY found on NXP
> LPC18xx and LPC43xx devices. This driver takes care of
> enabling the PHY in CREG (syscon) and setting the required
> clock frequency.
>
> Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>   drivers/phy/Kconfig               |  11 +++
>   drivers/phy/Makefile              |   1 +
>   drivers/phy/phy-lpc18xx-usb-otg.c | 145 ++++++++++++++++++++++++++++++++++++++
>   3 files changed, 157 insertions(+)
>   create mode 100644 drivers/phy/phy-lpc18xx-usb-otg.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index a53bd5b52df9..e11fb9e3c760 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -52,6 +52,17 @@ config PHY_EXYNOS_MIPI_VIDEO
>   	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
>   	  and EXYNOS SoCs.
>
> +config PHY_LPC18XX_USB_OTG
> +	tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
> +	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
> +	select GENERIC_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
> +
> +	  This driver is need for USB0 support on LPC18xx/43xx and takes
> +	  care of enabling and clock setup.
> +
>   config PHY_MVEBU_SATA
>   	def_bool y
>   	depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index f12625178780..b7251f3b9ef7 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
>   obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o
>   obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
>   obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
> +obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
>   obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
>   obj-$(CONFIG_PHY_MIPHY28LP) 		+= phy-miphy28lp.o
>   obj-$(CONFIG_PHY_MIPHY365X)		+= phy-miphy365x.o
> diff --git a/drivers/phy/phy-lpc18xx-usb-otg.c b/drivers/phy/phy-lpc18xx-usb-otg.c
> new file mode 100644
> index 000000000000..3a86e8f75e7e
> --- /dev/null
> +++ b/drivers/phy/phy-lpc18xx-usb-otg.c
> @@ -0,0 +1,145 @@
> +/*
> + * PHY driver for NXP LPC18xx/43xx internal USB OTG PHY
> + *
> + * Copyright (C) 2015 Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +/* USB OTG PHY register offset and bit in CREG */
> +#define LPC18XX_CREG_CREG0		0x004
> +# define LPC18XX_CREG_CREG0_USB0PHY	BIT(5)

don't prefer a space between # and define. Not a strong feeling though.
> +
> +struct lpc18xx_usb_otg_phy {
> +	struct phy *phy;
> +	struct clk *clk;
> +	struct regmap *reg;
> +};
> +
> +static int lpc18xx_usb_otg_phy_init(struct phy *phy)
> +{
> +	struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
> +	int ret;
> +
> +	ret = clk_prepare(lpc->clk);
> +	if (ret)
> +		return ret;
> +
> +	/* The PHY must be clocked at 480 MHz */
> +	return clk_set_rate(lpc->clk, 480000000);
> +}
> +
> +static int lpc18xx_usb_otg_phy_exit(struct phy *phy)
> +{
> +	struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
> +
> +	clk_unprepare(lpc->clk);
> +
> +	return 0;
> +}
> +
> +static int lpc18xx_usb_otg_phy_power_on(struct phy *phy)
> +{
> +	struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
> +	int ret;
> +
> +	ret = clk_enable(lpc->clk);
> +	if (ret)
> +		return ret;
> +
> +	/* The bit in CREG is cleared to enable the PHY */
> +	return regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
> +				  LPC18XX_CREG_CREG0_USB0PHY, 0);
> +}
> +
> +static int lpc18xx_usb_otg_phy_power_off(struct phy *phy)
> +{
> +	struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
> +	int ret;
> +
> +	ret = regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
> +				 LPC18XX_CREG_CREG0_USB0PHY,
> +				 LPC18XX_CREG_CREG0_USB0PHY);
> +	if (ret)
> +		return ret;
> +
> +	clk_disable(lpc->clk);
> +
> +	return 0;
> +}
> +
> +static const struct phy_ops lpc18xx_usb_otg_phy_ops = {
> +	.init		= lpc18xx_usb_otg_phy_init,
> +	.exit		= lpc18xx_usb_otg_phy_exit,
> +	.power_on	= lpc18xx_usb_otg_phy_power_on,
> +	.power_off	= lpc18xx_usb_otg_phy_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int lpc18xx_usb_otg_phy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct lpc18xx_usb_otg_phy *lpc;
> +
> +	lpc = devm_kzalloc(&pdev->dev, sizeof(*lpc), GFP_KERNEL);
> +	if (!lpc)
> +		return -ENOMEM;
> +
> +	lpc->reg = syscon_regmap_lookup_by_compatible("nxp,lpc1850-creg");
> +	if (IS_ERR(lpc->reg)) {
> +		dev_err(&pdev->dev, "failed to get syscon\n");
> +		return PTR_ERR(lpc->reg);
> +	}
> +
> +	lpc->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(lpc->clk)) {
> +		dev_err(&pdev->dev, "failed to get clock\n");
> +		return PTR_ERR(lpc->clk);
> +	}
> +
> +	lpc->phy = devm_phy_create(&pdev->dev, NULL, &lpc18xx_usb_otg_phy_ops);
> +	if (IS_ERR(lpc->phy)) {
> +		dev_err(&pdev->dev, "failed to create PHY\n");
> +		return PTR_ERR(lpc->phy);
> +	}
> +
> +	phy_set_drvdata(lpc->phy, lpc);
> +
> +	phy_provider = devm_of_phy_provider_register(&pdev->dev,
> +						     of_phy_simple_xlate);
> +	if (IS_ERR(phy_provider))
> +		return PTR_ERR(phy_provider);
> +
> +	return 0;

replace it with return PTR_ERR_OR_ZERO(phy_provider);

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] phy: add lpc18xx usb otg phy driver

[Joachim Eastwood]

Hi Kishon,

On 21 May 2015 at 14:55, Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org> wrote:
> Hi,
>
>
> On Saturday 16 May 2015 10:57 PM, Joachim Eastwood wrote:
>>
>> Add PHY driver for the internal USB OTG PHY found on NXP
>> LPC18xx and LPC43xx devices. This driver takes care of
>> enabling the PHY in CREG (syscon) and setting the required
>> clock frequency.
>>
>> Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> ---
<snip>
>> +/* USB OTG PHY register offset and bit in CREG */
>> +#define LPC18XX_CREG_CREG0             0x004
>> +# define LPC18XX_CREG_CREG0_USB0PHY    BIT(5)
>
>
> don't prefer a space between # and define. Not a strong feeling though.

Okey, I'll remove it.

>> +
>> +       phy_provider = devm_of_phy_provider_register(&pdev->dev,
>> +                                                    of_phy_simple_xlate);
>> +       if (IS_ERR(phy_provider))
>> +               return PTR_ERR(phy_provider);
>> +
>> +       return 0;
>
>
> replace it with return PTR_ERR_OR_ZERO(phy_provider);

Okey.


Thanks for the review, Kishon.

I'll send a updated version later today.


regards,
Joachim Eastwood
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/2] doc: dt: add documentation for nxp,lpc1850-usb-otg-phy

[Joachim Eastwood]

Add binding documentation for nxp,lpc1850-usb-otg-phy. This PHY
can found on NXP LPC18xx and LPC43xx devices.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 .../bindings/phy/nxp,lpc1850-usb-otg-phy.txt          | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt b/Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt
new file mode 100644
index 000000000000..3da60ca04a42
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt
@@ -0,0 +1,19 @@
+NXP LPC18xx/43xx internal USB OTG PHY binding
+---------------------------------------------
+
+This file contains documentation for the internal USB OTG PHY found
+in NXP LPC18xx and LPC43xx SoCs.
+
+Required properties:
+- compatible	: must be "nxp,lpc1850-usb-otg-phy"
+- clocks	: must be exactly one entry
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- #phy-cells	: must be 0 for this phy
+See: Documentation/devicetree/bindings/phy/phy-bindings.txt
+
+Example:
+usb0_otg_phy: usb0-otg-phy {
+	compatible = "nxp,lpc1850-usb-otg-phy";
+	clocks = <&ccu1 CLK_USB0>;
+	#phy-cells = <0>;
+};
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/2] doc: dt: add documentation for nxp,lpc1850-usb-otg-phy

[Kishon Vijay Abraham I]

On Saturday 16 May 2015 10:57 PM, Joachim Eastwood wrote:
> Add binding documentation for nxp,lpc1850-usb-otg-phy. This PHY

%s/nxp,lpc1850-usb-otg-phy/NXP LPC18xx/43xx USB OTG PHY
> can found on NXP LPC18xx and LPC43xx devices.

Fix $subject to something like 'dt_bindings: Add NXP LPC18xx/43xx USB OTG PHY 
bindings'
>
> Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>   .../bindings/phy/nxp,lpc1850-usb-otg-phy.txt          | 19 +++++++++++++++++++
>   1 file changed, 19 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt b/Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt
> new file mode 100644
> index 000000000000..3da60ca04a42
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt

phy-lpc18xx-usb-otg.txt?

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/2] doc: dt: add documentation for nxp,lpc1850-usb-otg-phy

[Joachim Eastwood]

Hi Kishon,

On 21 May 2015 at 14:59, Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org> wrote:
>
>
> On Saturday 16 May 2015 10:57 PM, Joachim Eastwood wrote:
>>
>> Add binding documentation for nxp,lpc1850-usb-otg-phy. This PHY
>
>
> %s/nxp,lpc1850-usb-otg-phy/NXP LPC18xx/43xx USB OTG PHY

Sure.

>>
>> can found on NXP LPC18xx and LPC43xx devices.
>
>
> Fix $subject to something like 'dt_bindings: Add NXP LPC18xx/43xx USB OTG
> PHY bindings'

okey.

>>
>>
>> Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> ---
>>   .../bindings/phy/nxp,lpc1850-usb-otg-phy.txt          | 19
>> +++++++++++++++++++
>>   1 file changed, 19 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt
>>
>> diff --git
>> a/Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt
>> b/Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt
>> new file mode 100644
>> index 000000000000..3da60ca04a42
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/nxp,lpc1850-usb-otg-phy.txt
>
>
> phy-lpc18xx-usb-otg.txt?

Fine by me.

Thanks for your comments, Kishon.


regards,
Joachim Eastwood
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html