[PATCHv4 03/10] arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk

[PATCHv4 03/10] arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk

[Tomi Valkeinen]

We need set-rate-parent flags for the display's clock path so that the
DSS driver can change the clock rate of the PLL.

This patchs adds the ti,set-rate-parent flag to 'dss_dss_clk' clock
node, which is only a gate clock, allowing the setting of the clock rate
to propagate to the PLL.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 470f39c4e326..357bedeebfac 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1531,6 +1531,7 @@
 		clocks = <&dpll_per_h12x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1120>;
+		ti,set-rate-parent;
 	};
 
 	dss_hdmi_clk: dss_hdmi_clk {
-- 
2.1.4

Re: [PATCHv4 03/10] arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk

[Tero Kristo]

On 06/01/2015 09:23 AM, Tomi Valkeinen wrote:
> We need set-rate-parent flags for the display's clock path so that the
> DSS driver can change the clock rate of the PLL.
>
> This patchs adds the ti,set-rate-parent flag to 'dss_dss_clk' clock
> node, which is only a gate clock, allowing the setting of the clock rate
> to propagate to the PLL.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: devicetree@vger.kernel.org

Acked-by: Tero Kristo <t-kristo@ti.com>

> ---
>   arch/arm/boot/dts/dra7xx-clocks.dtsi | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> index 470f39c4e326..357bedeebfac 100644
> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> @@ -1531,6 +1531,7 @@
>   		clocks = <&dpll_per_h12x2_ck>;
>   		ti,bit-shift = <8>;
>   		reg = <0x1120>;
> +		ti,set-rate-parent;
>   	};
>
>   	dss_hdmi_clk: dss_hdmi_clk {
>

[PATCHv4 08/10] arm/dts: dra7.dtsi: add DSS support

[Tomi Valkeinen]

DRA7xxx contains a very similar DSS to OMAP5. The main differences are:

* no DSI or RFBI support.
* 1 or 2 dedicated video PLLs.
* need to do additional configuration to the DRA7 CONTROL module.

DRA72xx has only one video PLL, and DRA74xx has two.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org
---
 arch/arm/boot/dts/dra7.dtsi   | 38 ++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/dra72x.dtsi | 11 +++++++++++
 arch/arm/boot/dts/dra74x.dtsi | 15 +++++++++++++++
 3 files changed, 64 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index db0890a36e96..f3a8237cea39 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1474,6 +1474,44 @@
 			clocks = <&sys_clkin1>;
 			status = "disabled";
 		};
+
+		dss: dss@58000000 {
+			compatible = "ti,dra7-dss";
+			/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
+			/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			/* CTRL_CORE_DSS_PLL_CONTROL */
+			syscon-pll-ctrl = <&scm_conf 0x538>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@58001000 {
+				compatible = "ti,dra7-dispc";
+				reg = <0x58001000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss_dss_clk>;
+				clock-names = "fck";
+				/* CTRL_CORE_SMA_SW_1 */
+				syscon-pol = <&scm_conf 0x534>;
+			};
+
+			hdmi: encoder@58060000 {
+				compatible = "ti,dra7-hdmi";
+				reg = <0x58040000 0x200>,
+				      <0x58040200 0x80>,
+				      <0x58040300 0x80>,
+				      <0x58060000 0x19000>;
+				reg-names = "wp", "pll", "phy", "core";
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_hdmi";
+				clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+		};
 	};
 
 	thermal_zones: thermal-zones {
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index 03d742f8d572..eaca143faa77 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -34,3 +34,14 @@
 		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
+
+&dss {
+	reg = <0x58000000 0x80>,
+	      <0x58004054 0x4>,
+	      <0x58004300 0x20>;
+	reg-names = "dss", "pll1_clkctrl", "pll1";
+
+	clocks = <&dss_dss_clk>,
+		 <&dss_video1_clk>;
+	clock-names = "fck", "video1_clk";
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index cc560a70926f..fa995d0ca1f2 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -73,3 +73,18 @@
 		};
 	};
 };
+
+&dss {
+	reg = <0x58000000 0x80>,
+	      <0x58004054 0x4>,
+	      <0x58004300 0x20>,
+	      <0x58005054 0x4>,
+	      <0x58005300 0x20>;
+	reg-names = "dss", "pll1_clkctrl", "pll1",
+		    "pll2_clkctrl", "pll2";
+
+	clocks = <&dss_dss_clk>,
+		 <&dss_video1_clk>,
+		 <&dss_video2_clk>;
+	clock-names = "fck", "video1_clk", "video2_clk";
+};
-- 
2.1.4

Re: [PATCHv4 08/10] arm/dts: dra7.dtsi: add DSS support

[Tony Lindgren]

* Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org> [150531 23:25]:
> DRA7xxx contains a very similar DSS to OMAP5. The main differences are:
> 
> * no DSI or RFBI support.
> * 1 or 2 dedicated video PLLs.
> * need to do additional configuration to the DRA7 CONTROL module.
> 
> DRA72xx has only one video PLL, and DRA74xx has two.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org

Acked-by: Tony Lindgren <tonY-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv4 09/10] arm/dts: dra72-evm.dts: add HDMI

[Tomi Valkeinen]

DRA72 EVM has a HDMI output. This patch adds the device tree nodes
required for HDMI.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org
---
 arch/arm/boot/dts/dra72-evm.dts | 110 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 110 insertions(+)

diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index ce0390f081d9..4e1b60581782 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -19,6 +19,10 @@
 		reg = <0x80000000 0x40000000>; /* 1024 MB */
 	};
 
+	aliases {
+		display0 = &hdmi0;
+	};
+
 	evm_3v3: fixedregulator-evm_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "evm_3v3";
@@ -35,6 +39,51 @@
 		compatible = "linux,extcon-usb-gpio";
 		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
+			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &dra7_pmx_core {
@@ -45,6 +94,13 @@
 		>;
 	};
 
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+			0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+		>;
+	};
+
 	nand_default: nand_default {
 		pinctrl-single,pins = <
 			0x0	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
@@ -142,6 +198,19 @@
 			0xb8 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
 		>;
 	};
+
+	hdmi_pins: pinmux_hdmi_pins {
+		pinctrl-single,pins = <
+			0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+			0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+		>;
+	};
 };
 
 &i2c1 {
@@ -277,6 +346,27 @@
 	};
 };
 
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+
+	pcf_hdmi: pcf8575@26 {
+		compatible = "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * initial state is used here to keep the mdio interface
+		 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
+		 * VIN2_S0 driven high otherwise Ethernet stops working
+		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
+		 */
+		lines-initial-states = <0x0f2b>;
+	};
+};
+
 &uart1 {
 	status = "okay";
 };
@@ -566,3 +656,23 @@
 		};
 	};
 };
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo3_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
-- 
2.1.4

Re: [PATCHv4 09/10] arm/dts: dra72-evm.dts: add HDMI

[Tony Lindgren]

* Tomi Valkeinen <tomi.valkeinen@ti.com> [150531 23:25]:
> DRA72 EVM has a HDMI output. This patch adds the device tree nodes
> required for HDMI.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: devicetree@vger.kernel.org

Acked-by: Tony Lindgren <tonY@atomide.com>

[PATCHv4 10/10] arm/dts: am57xx-beagle-x15.dts: add HDMI

[Tomi Valkeinen]

AM57xx Beagle X15 has a HDMI output. This patch adds the device tree
nodes required for HDMI.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 81 +++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 15f198e4864d..f1e430507e4f 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -18,6 +18,7 @@
 	aliases {
 		rtc0 = &mcp_rtc;
 		rtc1 = &tps659038_rtc;
+		display0 = &hdmi0;
 	};
 
 	memory {
@@ -102,6 +103,51 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&extcon_usb2_pins>;
 	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+			<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &dra7_pmx_core {
@@ -121,6 +167,13 @@
 		>;
 	};
 
+	hdmi_pins: pinmux_hdmi_pins {
+		pinctrl-single,pins = <
+			0x408 (PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
+			0x40c (PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
+		>;
+	};
+
 	i2c3_pins_default: i2c3_pins_default {
 		pinctrl-single,pins = <
 			0x2a4 (PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
@@ -277,6 +330,14 @@
 			0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
 		>;
 	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x3b0 (PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
+			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
+			0x370 (PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
+		>;
+	};
 };
 
 &i2c1 {
@@ -607,3 +668,23 @@
 		};
        };
 };
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo3_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
-- 
2.1.4

Re: [PATCHv4 10/10] arm/dts: am57xx-beagle-x15.dts: add HDMI

[Tony Lindgren]

* Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org> [150531 23:25]:
> AM57xx Beagle X15 has a HDMI output. This patch adds the device tree
> nodes required for HDMI.

This one does not seem to apply to linux next, did not look
further where it conflicts.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv4 10/10] arm/dts: am57xx-beagle-x15.dts: add HDMI

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 412 bytes --]



On 02/06/15 00:51, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org> [150531 23:25]:
>> AM57xx Beagle X15 has a HDMI output. This patch adds the device tree
>> nodes required for HDMI.
> 
> This one does not seem to apply to linux next, did not look
> further where it conflicts.

Looks like a trivial one line conflict, about adding an alias to .dts.

 Tomi


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCHv4 10/10] arm/dts: am57xx-beagle-x15.dts: add HDMI

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 516 bytes --]



On 02/06/15 00:51, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org> [150531 23:25]:
>> AM57xx Beagle X15 has a HDMI output. This patch adds the device tree
>> nodes required for HDMI.
> 
> This one does not seem to apply to linux next, did not look
> further where it conflicts.

Looks like the change was also in -rc6. I've rebased my patches on -rc6,
and added the acks:

git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git dra7-dss-arch

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCHv4 10/10] arm/dts: am57xx-beagle-x15.dts: add HDMI

[Tony Lindgren]

* Tomi Valkeinen <tomi.valkeinen@ti.com> [150603 04:28]:
> 
> 
> On 02/06/15 00:51, Tony Lindgren wrote:
> > * Tomi Valkeinen <tomi.valkeinen@ti.com> [150531 23:25]:
> >> AM57xx Beagle X15 has a HDMI output. This patch adds the device tree
> >> nodes required for HDMI.
> > 
> > This one does not seem to apply to linux next, did not look
> > further where it conflicts.
> 
> Looks like the change was also in -rc6. I've rebased my patches on -rc6,
> and added the acks:
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git dra7-dss-arch

OK, since there are no other merge conflicts that I'm aware of,
it's best that you merge the whole branch. I've acked the patches,
so for this one too:

Acked-by: Tony Lindgren <tonY@atomide.com>

Re: [PATCHv4 10/10] arm/dts: am57xx-beagle-x15.dts: add HDMI

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 906 bytes --]



On 03/06/15 18:44, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@ti.com> [150603 04:28]:
>>
>>
>> On 02/06/15 00:51, Tony Lindgren wrote:
>>> * Tomi Valkeinen <tomi.valkeinen@ti.com> [150531 23:25]:
>>>> AM57xx Beagle X15 has a HDMI output. This patch adds the device tree
>>>> nodes required for HDMI.
>>>
>>> This one does not seem to apply to linux next, did not look
>>> further where it conflicts.
>>
>> Looks like the change was also in -rc6. I've rebased my patches on -rc6,
>> and added the acks:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git dra7-dss-arch
> 
> OK, since there are no other merge conflicts that I'm aware of,
> it's best that you merge the whole branch. I've acked the patches,
> so for this one too:

Ok, I can do that, but isn't this more linux-arm stuff? All the driver
side code is already in the mainline.

 Tomi


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCHv4 10/10] arm/dts: am57xx-beagle-x15.dts: add HDMI

[Tony Lindgren]

* Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org> [150603 09:03]:
> 
> 
> On 03/06/15 18:44, Tony Lindgren wrote:
> > * Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org> [150603 04:28]:
> >>
> >>
> >> On 02/06/15 00:51, Tony Lindgren wrote:
> >>> * Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org> [150531 23:25]:
> >>>> AM57xx Beagle X15 has a HDMI output. This patch adds the device tree
> >>>> nodes required for HDMI.
> >>>
> >>> This one does not seem to apply to linux next, did not look
> >>> further where it conflicts.
> >>
> >> Looks like the change was also in -rc6. I've rebased my patches on -rc6,
> >> and added the acks:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git dra7-dss-arch
> > 
> > OK, since there are no other merge conflicts that I'm aware of,
> > it's best that you merge the whole branch. I've acked the patches,
> > so for this one too:
> 
> Ok, I can do that, but isn't this more linux-arm stuff? All the driver
> side code is already in the mainline.

Yes but we're getting so late into merge window that I'd rather not
take it for v4.2 at this point. And it's all DSS related.

Please make sure you get an ack for the drivers/clk/omap change from
Mike or Stephen though.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv4 10/10] arm/dts: am57xx-beagle-x15.dts: add HDMI

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [150603 09:11]:
> * Tomi Valkeinen <tomi.valkeinen@ti.com> [150603 09:03]:
> > 
> > 
> > On 03/06/15 18:44, Tony Lindgren wrote:
> > > * Tomi Valkeinen <tomi.valkeinen@ti.com> [150603 04:28]:
> > >>
> > >>
> > >> On 02/06/15 00:51, Tony Lindgren wrote:
> > >>> * Tomi Valkeinen <tomi.valkeinen@ti.com> [150531 23:25]:
> > >>>> AM57xx Beagle X15 has a HDMI output. This patch adds the device tree
> > >>>> nodes required for HDMI.
> > >>>
> > >>> This one does not seem to apply to linux next, did not look
> > >>> further where it conflicts.
> > >>
> > >> Looks like the change was also in -rc6. I've rebased my patches on -rc6,
> > >> and added the acks:
> > >>
> > >> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git dra7-dss-arch
> > > 
> > > OK, since there are no other merge conflicts that I'm aware of,
> > > it's best that you merge the whole branch. I've acked the patches,
> > > so for this one too:
> > 
> > Ok, I can do that, but isn't this more linux-arm stuff? All the driver
> > side code is already in the mainline.
> 
> Yes but we're getting so late into merge window that I'd rather not
> take it for v4.2 at this point. And it's all DSS related.
> 
> Please make sure you get an ack for the drivers/clk/omap change from
> Mike or Stephen though.

Naturally I mean "getting so close to the merge window" above :)

Regards,

Tony

Re: [PATCHv4 10/10] arm/dts: am57xx-beagle-x15.dts: add HDMI

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 723 bytes --]



On 03/06/15 20:16, Tony Lindgren wrote:

>>>> OK, since there are no other merge conflicts that I'm aware of,
>>>> it's best that you merge the whole branch. I've acked the patches,
>>>> so for this one too:
>>>
>>> Ok, I can do that, but isn't this more linux-arm stuff? All the driver
>>> side code is already in the mainline.
>>
>> Yes but we're getting so late into merge window that I'd rather not
>> take it for v4.2 at this point. And it's all DSS related.
>>
>> Please make sure you get an ack for the drivers/clk/omap change from
>> Mike or Stephen though.
> 
> Naturally I mean "getting so close to the merge window" above :)

Thanks everyone. I've pushed this to fbdev for-next.

 Tomi


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]