From: Tero Kristo <t-kristo@ti.com>
To: Vignesh R <vigneshr@ti.com>, Paul Walmsley <paul@pwsan.com>,
Thierry Reding <thierry.reding@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Benoit Cousson <bcousson@baylibre.com>,
Tony Lindgren <tony@atomide.com>,
Russell King <linux@arm.linux.org.uk>,
Mike Turquette <mturquette@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH 2/5] ARM: OMAP2+: DRA7: Add hwmod entries for PWMSS
Date: Tue, 2 Jun 2015 11:21:21 +0300 [thread overview]
Message-ID: <556D6781.2090405@ti.com> (raw)
In-Reply-To: <1433159614-437-3-git-send-email-vigneshr@ti.com>
On 06/01/2015 02:53 PM, Vignesh R wrote:
> Add hwmod entries for the PWMSS on DRA7.
Can you provide some documentation references for this data?
I was looking at the TRM and at least the main_clk selection is somewhat
unclear to me.
-Tero
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 239 ++++++++++++++++++++++++++++++
> 1 file changed, 239 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index 0e64c2fac0b5..86a7ac9a3138 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -362,6 +362,149 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
> },
> };
>
> +/* pwmss */
> +static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
> + .rev_offs = 0x0,
> + .sysc_offs = 0x4,
> + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_RESET_STATUS,
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type2,
> +};
> +
> +struct omap_hwmod_class dra7xx_epwmss_hwmod_class = {
> + .name = "epwmss",
> + .sysc = &dra7xx_epwmss_sysc,
> +};
> +
> +static struct omap_hwmod_class dra7xx_ecap_hwmod_class = {
> + .name = "ecap",
> +};
> +
> +static struct omap_hwmod_class dra7xx_eqep_hwmod_class = {
> + .name = "eqep",
> +};
> +
> +struct omap_hwmod_class dra7xx_ehrpwm_hwmod_class = {
> + .name = "ehrpwm",
> +};
> +
> +/* epwmss0 */
> +struct omap_hwmod dra7xx_epwmss0_hwmod = {
> + .name = "epwmss0",
> + .class = &dra7xx_epwmss_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> + .prcm = {
> + .omap4 = {
> + .modulemode = MODULEMODE_SWCTRL,
> + .clkctrl_offs = DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL_OFFSET,
> + .context_offs = DRA7XX_RM_L4PER2_PWMSS1_CONTEXT_OFFSET,
> + },
> + },
> +};
> +
> +/* ecap0 */
> +struct omap_hwmod dra7xx_ecap0_hwmod = {
> + .name = "ecap0",
> + .class = &dra7xx_ecap_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> +};
> +
> +/* eqep0 */
> +struct omap_hwmod dra7xx_eqep0_hwmod = {
> + .name = "eqep0",
> + .class = &dra7xx_eqep_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> +};
> +
> +/* ehrpwm0 */
> +struct omap_hwmod dra7xx_ehrpwm0_hwmod = {
> + .name = "ehrpwm0",
> + .class = &dra7xx_ehrpwm_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> +};
> +
> +/* epwmss1 */
> +struct omap_hwmod dra7xx_epwmss1_hwmod = {
> + .name = "epwmss1",
> + .class = &dra7xx_epwmss_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> + .prcm = {
> + .omap4 = {
> + .modulemode = MODULEMODE_SWCTRL,
> + .clkctrl_offs = DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL_OFFSET,
> + .context_offs = DRA7XX_RM_L4PER2_PWMSS2_CONTEXT_OFFSET,
> + },
> + },
> +};
> +
> +/* ecap1 */
> +struct omap_hwmod dra7xx_ecap1_hwmod = {
> + .name = "ecap1",
> + .class = &dra7xx_ecap_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> +};
> +
> +/* eqep1 */
> +struct omap_hwmod dra7xx_eqep1_hwmod = {
> + .name = "eqep1",
> + .class = &dra7xx_eqep_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> +};
> +
> +/* ehrpwm1 */
> +struct omap_hwmod dra7xx_ehrpwm1_hwmod = {
> + .name = "ehrpwm1",
> + .class = &dra7xx_ehrpwm_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> +};
> +
> +/* epwmss2 */
> +struct omap_hwmod dra7xx_epwmss2_hwmod = {
> + .name = "epwmss2",
> + .class = &dra7xx_epwmss_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> + .prcm = {
> + .omap4 = {
> + .modulemode = MODULEMODE_SWCTRL,
> + .clkctrl_offs = DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL_OFFSET,
> + .context_offs = DRA7XX_RM_L4PER2_PWMSS3_CONTEXT_OFFSET,
> + },
> + },
> +};
> +
> +/* ecap2 */
> +struct omap_hwmod dra7xx_ecap2_hwmod = {
> + .name = "ecap2",
> + .class = &dra7xx_ecap_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> +};
> +
> +/* eqep2 */
> +struct omap_hwmod dra7xx_eqep2_hwmod = {
> + .name = "eqep2",
> + .class = &dra7xx_eqep_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> +};
> +
> +/* ehrpwm2 */
> +struct omap_hwmod dra7xx_ehrpwm2_hwmod = {
> + .name = "ehrpwm2",
> + .class = &dra7xx_ehrpwm_hwmod_class,
> + .clkdm_name = "l4per2_clkdm",
> + .main_clk = "l4_root_clk_div",
> +};
> +
> /*
> * 'dma' class
> *
> @@ -2601,6 +2744,90 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio6 = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss0 = {
> + .master = &dra7xx_l4_per2_hwmod,
> + .slave = &dra7xx_epwmss0_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_epwmss0__ecap0 = {
> + .master = &dra7xx_epwmss0_hwmod,
> + .slave = &dra7xx_ecap0_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_epwmss0__eqep0 = {
> + .master = &dra7xx_epwmss0_hwmod,
> + .slave = &dra7xx_eqep0_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_epwmss0__ehrpwm0 = {
> + .master = &dra7xx_epwmss0_hwmod,
> + .slave = &dra7xx_ehrpwm0_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss1 = {
> + .master = &dra7xx_l4_per2_hwmod,
> + .slave = &dra7xx_epwmss1_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_epwmss1__ecap1 = {
> + .master = &dra7xx_epwmss1_hwmod,
> + .slave = &dra7xx_ecap1_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_epwmss1__eqep1 = {
> + .master = &dra7xx_epwmss1_hwmod,
> + .slave = &dra7xx_eqep1_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_epwmss1__ehrpwm1 = {
> + .master = &dra7xx_epwmss1_hwmod,
> + .slave = &dra7xx_ehrpwm1_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss2 = {
> + .master = &dra7xx_l4_per2_hwmod,
> + .slave = &dra7xx_epwmss2_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_epwmss2__ecap2 = {
> + .master = &dra7xx_epwmss2_hwmod,
> + .slave = &dra7xx_ecap2_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_epwmss2__eqep2 = {
> + .master = &dra7xx_epwmss2_hwmod,
> + .slave = &dra7xx_eqep2_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> +struct omap_hwmod_ocp_if dra7xx_epwmss2__ehrpwm2 = {
> + .master = &dra7xx_epwmss2_hwmod,
> + .slave = &dra7xx_ehrpwm2_hwmod,
> + .clk = "l4_root_clk_div",
> + .user = OCP_USER_MPU,
> +};
> +
> /* l4_per1 -> gpio7 */
> static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio7 = {
> .master = &dra7xx_l4_per1_hwmod,
> @@ -3394,6 +3621,18 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
> &dra7xx_l3_main_1__vcp2,
> &dra7xx_l4_per2__vcp2,
> &dra7xx_l4_wkup__wd_timer2,
> + &dra7xx_l4_per2__epwmss0,
> + &dra7xx_epwmss0__ecap0,
> + &dra7xx_epwmss0__eqep0,
> + &dra7xx_epwmss0__ehrpwm0,
> + &dra7xx_l4_per2__epwmss1,
> + &dra7xx_epwmss1__ecap1,
> + &dra7xx_epwmss1__eqep1,
> + &dra7xx_epwmss1__ehrpwm1,
> + &dra7xx_l4_per2__epwmss2,
> + &dra7xx_epwmss2__ecap2,
> + &dra7xx_epwmss2__eqep2,
> + &dra7xx_epwmss2__ehrpwm2,
> NULL,
> };
>
>
next prev parent reply other threads:[~2015-06-02 8:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-01 11:53 [PATCH 0/5] Add support for PWMSS on DRA7 Vignesh R
2015-06-01 11:53 ` [PATCH 1/5] ARM: OMAP2+: DRA7: clockdomain: change l4per2_7xx_clkdm to SW_WKUP Vignesh R
2015-06-01 11:53 ` [PATCH 2/5] ARM: OMAP2+: DRA7: Add hwmod entries for PWMSS Vignesh R
2015-06-02 8:21 ` Tero Kristo [this message]
2015-06-02 11:24 ` Vignesh R
2015-06-01 11:53 ` [PATCH 3/5] ARM: dts: DRA7: Add TBCLK " Vignesh R
2015-06-02 8:22 ` Tero Kristo
2015-06-02 11:23 ` Vignesh R
2015-06-01 11:53 ` [PATCH 4/5] clk: ti: DRA7: Add tbclk data for ehrpwm Vignesh R
2015-06-01 11:53 ` [PATCH 5/5] ARM: dts: DRA7: Add dt nodes for PWMSS Vignesh R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=556D6781.2090405@ti.com \
--to=t-kristo@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=paul@pwsan.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).