Re: [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support

[Vaibhav Hiremath <vaibhav.hiremath@linaro.org>]

On Thursday 18 June 2015 12:28 AM, Vaibhav Hiremath wrote:
> This patch-series adds support for Device tree to 88PM800 mfd driver.
> It also enabled configuration of irq clear method through DT.
>
> Testing::
>   - Boot tested on PXA1928 based platform.
>   - probe of mfd, rtc and regulator function passing successfully.
>   - Basic read operations on registers
>
>
> V1 => V1
> =======
> Link to V1: http://lkml.iu.edu/hypermail/linux/kernel/1505.3/04386.html
>
>    - Split binding changes from original commit
>    - Updated binding info as per Rob's suggestion
>    - Dropped PATCH 4/4, as discussed during review
>    - Dropped PATCH 3/4, as it is independent RTC code change,
>      so will submit it separately to ease merging.
>    - Fixed all other minor comments
>
> Attempt has been made to push some of the patches to the list sometime
> back in 2013.
>
> Link to previous patch submission:
>          https://lkml.org/lkml/2013/8/14/86
>
> Vaibhav Hiremath (3):
>    mfd: 88pm800: Add device tree support
>    mfd: 88pm800: Allow configuration of interrupt clear method
>    mfd: devicetree: bindings: Add new 88pm800 mfd binding
>
>   Documentation/devicetree/bindings/mfd/88pm800.txt | 60 +++++++++++++++++++++++
>   drivers/mfd/88pm800.c                             | 40 +++++++++++++--
>   include/linux/mfd/88pm80x.h                       |  6 ++-
>   3 files changed, 99 insertions(+), 7 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/mfd/88pm800.txt
>


Any update on this?

If there are no review comments, then can it be queued ?

Thanks,
Vaibhav