From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: Re: [PATCH 02/17] phy: ti-pipe3: use *syscon* framework to power on/off the PHY Date: Wed, 24 Jun 2015 16:56:37 +0530 Message-ID: <558A93ED.9050104@ti.com> References: <1435060743-5511-1-git-send-email-kishon@ti.com> <1435060743-5511-3-git-send-email-kishon@ti.com> <20150623175355.d80c1d6626439fbb6c26169c@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20150623175355.d80c1d6626439fbb6c26169c-l0cyMroinI0@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Roger Quadros Cc: bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org, balbi-l0cyMroinI0@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, nsekhar-l0cyMroinI0@public.gmane.org List-Id: devicetree@vger.kernel.org Hi, On Tuesday 23 June 2015 08:23 PM, Roger Quadros wrote: > Hi Kishon, > > On Tue, 23 Jun 2015 17:28:47 +0530 > Kishon Vijay Abraham I wrote: > >> Deprecate using phy-omap-control driver to power on/off the PHY and >> use *syscon* framework to do the same. >> >> Signed-off-by: Kishon Vijay Abraham I >> --- >> Documentation/devicetree/bindings/phy/ti-phy.txt | 10 ++- >> drivers/phy/phy-ti-pipe3.c | 91 ++++++++++++++++++---- >> 2 files changed, 86 insertions(+), 15 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt >> index f0f5537..d3ad3bf 100644 >> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt >> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt >> @@ -77,8 +77,6 @@ Required properties: >> * "div-clk" - apll clock >> >> Optional properties: >> - - ctrl-module : phandle of the control module used by PHY driver to power on >> - the PHY. >> - id: If there are multiple instance of the same type, in order to >> differentiate between each instance "id" can be used (e.g., multi-lane PCIe >> PHY). If "id" is not provided, it is set to default value of '1'. >> @@ -86,6 +84,14 @@ Optional properties: >> CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 >> register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. >> >> +Deprecated properties: >> + - ctrl-module : phandle of the control module used by PHY driver to power on >> + the PHY. >> + >> +Recommended properies: >> + - syscon-phy-power : phandle/offset pair. Phandle to the system control >> + module and the register offset to power on/off the PHY. >> + >> This is usually a subnode of ocp2scp to which it is connected. >> >> usb3phy@4a084400 { >> diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c >> index d784426..78bac00 100644 >> --- a/drivers/phy/phy-ti-pipe3.c >> +++ b/drivers/phy/phy-ti-pipe3.c >> @@ -56,6 +56,15 @@ >> >> #define SATA_PLL_SOFT_RESET BIT(18) >> >> +#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 >> +#define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14 >> + >> +#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 >> +#define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22 >> + >> +#define PIPE3_PHY_TX_RX_POWERON 0x3 >> +#define PIPE3_PHY_TX_RX_POWEROFF 0x0 >> + >> /* >> * This is an Empirical value that works, need to confirm the actual >> * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status >> @@ -86,8 +95,10 @@ struct ti_pipe3 { >> struct clk *refclk; >> struct clk *div_clk; >> struct pipe3_dpll_map *dpll_map; >> + struct regmap *phy_power_syscon; /* ctrl. reg. acces */ >> struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */ >> unsigned int dpll_reset_reg; /* reg. index within syscon */ >> + unsigned int power_reg; /* power reg. index within syscon */ >> bool sata_refclk_enabled; >> }; >> >> @@ -144,18 +155,49 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy); >> >> static int ti_pipe3_power_off(struct phy *x) >> { >> + u32 val; >> + int ret; >> struct ti_pipe3 *phy = phy_get_drvdata(x); >> >> - omap_control_phy_power(phy->control_dev, 0); >> + if (phy->phy_power_syscon) { >> + val = PIPE3_PHY_TX_RX_POWEROFF << >> + PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; >> + >> + ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, >> + PIPE3_PHY_PWRCTL_CLK_CMD_MASK, val); >> + if (ret < 0) >> + return ret; >> + } else { >> + omap_control_phy_power(phy->control_dev, 0); >> + } >> >> return 0; >> } >> >> static int ti_pipe3_power_on(struct phy *x) >> { >> + u32 val; >> + u32 mask; >> + int ret; >> + unsigned long rate; >> struct ti_pipe3 *phy = phy_get_drvdata(x); >> >> - omap_control_phy_power(phy->control_dev, 1); >> + if (phy->phy_power_syscon) { >> + rate = clk_get_rate(phy->sys_clk); > > what if clk_get_rate() returns 0? hmm.. If '0' is an error value of clk_get_rate() then it would be good to return with an error message. > >> + rate = rate / 1000000; >> + mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | >> + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK; >> + val = PIPE3_PHY_TX_RX_POWERON << >> + PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; >> + val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; >> + >> + ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, >> + mask, val); >> + if (ret < 0) >> + return ret; >> + } else { >> + omap_control_phy_power(phy->control_dev, 1); >> + } >> >> return 0; >> } >> @@ -417,19 +459,42 @@ static int ti_pipe3_probe(struct platform_device *pdev) >> phy->div_clk = ERR_PTR(-ENODEV); >> } >> >> - control_node = of_parse_phandle(node, "ctrl-module", 0); >> - if (!control_node) { >> - dev_err(&pdev->dev, "Failed to get control device phandle\n"); >> - return -EINVAL; >> - } >> + phy->phy_power_syscon = syscon_regmap_lookup_by_phandle(node, >> + "syscon-phy-power"); >> + if (IS_ERR(phy->phy_power_syscon)) { >> + dev_info(&pdev->dev, >> + "can't get syscon-phy-power, using control device\n"); > > dev_dbg()? as we don't want to annoy old DT users? okay. > >> + phy->phy_power_syscon = NULL; >> + >> + control_node = of_parse_phandle(node, "ctrl-module", 0); >> + if (!control_node) { >> + dev_err(&pdev->dev, >> + "Failed to get control device phandle\n"); >> + return -EINVAL; >> + } >> >> - control_pdev = of_find_device_by_node(control_node); >> - if (!control_pdev) { >> - dev_err(&pdev->dev, "Failed to get control device\n"); >> - return -EINVAL; >> - } >> + control_pdev = of_find_device_by_node(control_node); >> + if (!control_pdev) { >> + dev_err(&pdev->dev, "Failed to get control device\n"); >> + return -EINVAL; >> + } >> >> - phy->control_dev = &control_pdev->dev; >> + phy->control_dev = &control_pdev->dev; >> + } else { >> + phy->sys_clk = devm_clk_get(phy->dev, "sysclk"); >> + if (IS_ERR(phy->sys_clk)) { >> + dev_err(&pdev->dev, "unable to get sysclk\n"); >> + return -EINVAL; >> + } > > we're already doing this at another place in pipe3_probe. Let's do it at one place. right, this can be improved. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html