Re: [PATCH 2/4] arm64: dts: rockchip: enable USB A ports on ArmSoM Sige5

[Nicolas Frattaroli <nicolas.frattaroli@collabora.com>]

On Tuesday, 3 June 2025 19:01:14 Central European Summer Time Alexey Charkov wrote:
> Enable the two USB type A ports (USB2 and USB3) present on the ArmSoM
> Sige5 board.
> 
> Both ports use just one xHCI controller, with the USB 2.0 signals fed
> off the same USB OTG PHY through an onboard hub. VBUS of both ports is
> controlled by the same GPIO regulator (VCC_USBHOST in the schematics,
> toggled by GPIO4 RK_PA6).
> 
> Signed-off-by: Alexey Charkov <alchark@gmail.com>
> ---
>  .../boot/dts/rockchip/rk3576-armsom-sige5.dts      | 38 ++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 

This is already done here:

https://lore.kernel.org/linux-rockchip/20250507-rk3576-sige5-usb-v3-4-89bf5a614ccf@collabora.com/

> diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
> index d9c129be55a0d997e04e6d677cdc98fb50353418..7ce1fb1380b0863c902fdd9cbc7454ee6011cf92 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
> @@ -205,6 +205,24 @@ vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
>  		regulator-max-microvolt = <3300000>;
>  		vin-supply = <&vcc_5v0_sys>;
>  	};
> +
> +	vcc_5v0_host: regulator-vcc-5v0-host {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_5v0_host";
> +		regulator-boot-on;
> +		regulator-always-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		gpio = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
> +		vin-supply = <&vcc_5v0_device>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usb_host_pwren>;
> +	};
> +};
> +
> +&combphy1_psu {
> +	status = "okay";
>  };
>  
>  &cpu_b0 {
> @@ -757,6 +775,12 @@ pcie_reset: pcie-reset {
>  			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
>  		};
>  	};
> +
> +	usb {
> +		usb_host_pwren: usb-host-pwren {
> +			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
>  };
>  
>  &sai1 {
> @@ -798,11 +822,25 @@ &sdmmc {
>  	status = "okay";
>  };
>  
> +&u2phy1 {
> +	status = "okay";
> +};
> +
> +&u2phy1_otg {
> +	phy-supply = <&vcc_5v0_host>;
> +	status = "okay";
> +};
> +
>  &uart0 {
>  	pinctrl-0 = <&uart0m0_xfer>;
>  	status = "okay";
>  };
>  
> +&usb_drd1_dwc3 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
>  &vop {
>  	status = "okay";
>  };
> 
>