Re: [PATCH 5/9] iio: mma8452: add devicetree documentation

[Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On 04/07/15 14:55, Martin Kepplinger wrote:
> Signed-off-by: Martin Kepplinger <martin.kepplinger-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>
> Signed-off-by: Christoph Muellner <christoph.muellner-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>
This is trivial enough I'll take it without a device tree ack (after a few days)
but convention is to CC all device tree patches to the maintainers of devicetree
bindings as well as the devicetree list.  

Jonathan
> ---
>  .../devicetree/bindings/iio/accel/mma8452.txt       | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/mma8452.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
> new file mode 100644
> index 0000000..8d98e05
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
> @@ -0,0 +1,21 @@
> +Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer
> +
> +Required properties:
> +
> +  - compatible: should be "fsl,mma8653", "fsl,mma8652", "fsl,mma8453" or
> +    "fsl,mma8452" respectively.
> +  - reg: the I2C address of the chip
> +
> +Optional properties:
> +
> +  - interrupt-parent: should be the phandle for the interrupt controller
> +  - interrupts: interrupt mapping for GPIO IRQ
> +
> +Example:
> +
> +	mma8653fc@1d {
> +		compatible = "fsl,mma8653";
> +		reg = <0x1d>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <5 0>;
> +	};
>