From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH v3 2/2] iio: light: opt3001: Add device tree binding documentation Date: Sun, 05 Jul 2015 15:09:01 +0100 Message-ID: <55993A7D.7090806@kernel.org> References: <1435876079-26287-1-git-send-email-dannenberg@ti.com> <1435876079-26287-3-git-send-email-dannenberg@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1435876079-26287-3-git-send-email-dannenberg-l0cyMroinI0@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Andreas Dannenberg , linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On 02/07/15 23:27, Andreas Dannenberg wrote: > Signed-off-by: Andreas Dannenberg Utterly standard binding so unless someone shouts, I'll pick this up with the driver. Thanks, Jonathan > --- > .../devicetree/bindings/iio/light/opt3001.txt | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txt > > diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt > new file mode 100644 > index 0000000..d5f0765 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt > @@ -0,0 +1,18 @@ > +* Texas Instruments OPT3001 Ambient Light Sensor > + > +http://www.ti.com/product/opt3001 > + > +Required properties: > + - compatible: should be "ti,opt3001" > + - reg: the I2C address of the sensor > + - interrupt-parent: should be the phandle for the interrupt controller > + - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge) > + > +Example: > + > +opt3001@44 { > + compatible = "ti,opt3001"; > + reg = <0x44>; > + interrupt-parent = <&gpio1>; > + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; > +}; >